Re: APCO 25 card bad

Shut the scanner off, remove and reinseat the digital card.  The 
contacts may have developed a high resistance.

Ted

Bob wrote:
> Hi There, recently I was scanning and I began hearing the  Data channel 
> only. No voice or transmissions. I turned the scanner on later thinking 
> it was the system not the radio.
> Here is the problem. The APCO card is not being recognized and states
> "APCO CARD NOT INSTALLED". I took the card out checked the contacts and 
> cleaned them. Placed card back in and it doesnt function. ANY 
> suggestions what to do here. The new cards are the same price as ever.
> The scanner is getting old. i need this one fixed or a new card?
> Any suggestions would be good.
> Thanks
> Dr Bob... 
>
>
>
> If you have come here to find out about the 250D you have come to the right place! In fact the discussion of the BC-250D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-250D is OFF TOPIC. I hope this is clear to all group members.. 
> Yahoo! Groups Links
>
>
>
>
>
>