Re: R2 How do you take yours apart ?

I would suggest leaving the antenna connector alone and use
a solderwick to remove all solder from the circuitboard where
the antenna conector is soldered. You can then easily remove
the circuitboards to gain access to connectors and switches.

There have been several reports of users getting into trouble
when they have tried to disassambly the antenna connector,
so don't touch that nut.

But if I remember correctly, the loudspeaker connector, and
the rest of the switches for SQ and FUNC, where hard to get
to even when you have removed the radio and controller boards.
So a "Good Luck" are probably appropriate here.

Ubbe.

g8psz wrote:
> 
> Mine has developed an anoying intermitent internal speaker problem
> caused by the use of the ext spkr socket, how best to disassemble to
> gain access to the internals of said socket.
> Chris



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/ELTolB/TM
---------------------------------------------------------------------~->

Post message:   [email protected] 
Subscribe:      [email protected] 
Unsubscribe:    [email protected] 
List owner:     [email protected] 
 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/