Re: IC R2 Volume Problems
"bruce" <bbjeep-/[email protected]>
| Newsgroups | gmane.recreation.radio.hardware.icomr2 |
|---|---|
| Message-ID | <[email protected]> |
Thanks again Bob I got some cleaner/lubricant at Radio Shack tonight, I gave it one quick squirt and I plugged and unplugged the earphone a few times. There was a bit of black come off the tip of the plug and it seems to be working awhole lot better now. Thank you Bruce --- In [email protected], "Bob Parnass, AJ9S" <yahoo2@p...> wrote: > On Sunday 04 April 2004 01:51 pm, bruce wrote: > > > ...Would or could I get into too much trouble taking it a part to see > > if the contacts are bent or if there is dirt behind the pads. > > Yes. Try spraying a very small squirt of contact cleaner (not WD40) > into the earphone jack. Then insert an earphone a couple of times. > > If you are not experienced at electronic troubleshooting, do not > open the radio. > -- > ===================================================================== ==== > Bob Parnass, AJ9S GNU/Linux User http://parnass.com Post message: [email protected] Subscribe: [email protected] Unsubscribe: [email protected] List owner: [email protected] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/icomr2/ <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/