I need help with a software problem.

Hello All,

I am trying to set up my IC-R2 as a Radio controlled model airplane channel
scanner. I want to be able to detect interference before I fly my model
planes. I have found a RC model plane forum that has done just what I want
to do at the following address.
www.charlesriverrc.org/articles/radio/joelfoner_icomicr2.htm
But they are using the RTSystems software, and I would like to use Goran
Vlaski's free cloning software at the following address.
http://uk.geocities.com/blakkekatte/#_ICR2
This means I need someone to help me convert an ICF file to an .R2 format
file.

So this is where I need your help, if you have the RT Systems software and
the cloning cable, and would like to do some experimenting please read on!

I need someone to do the following steps.

1. Download the following ICF file.  ICOM IC-R2 configuration file
2. Download and install Goran Vlaski's software. some freeware (371kb)
3. Backup your current IC-R2 configuration to a file using RTSystems
software.
4. Upload the ICF file from step 1 in to the IC-R2 using you RTSystems
software.
5. Close the RTSystems software.
6. Start the Goran Vlaski's software and save the IC-R2 configuration to a
file. This will create a file with an .R2 extension.
7. Send this new file to me as an attachment. [email protected]
8. Close Goran Vlaski's software.
9. Upload your backup file from step 3.

Done

P.S. I just finish building my interface cable and have loaded Goran
Vlaski's free cloning software. Now all I need is the ICF file converted to
an .R2 format and I will be, as they say "Cooking with Gas"

Oh Yes, if any one see a problem with my plan please let me know.

Thanks
Bryan






------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/ELTolB/TM
--------------------------------------------------------------------~-> 

Post message:   [email protected] 
Subscribe:      [email protected] 
Unsubscribe:    [email protected] 
List owner:     [email protected] 
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/icomr2/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/