Re: R2 and ARC2 problem

I have the interface from
http://www.blackbagsoftware.com/icr2/
the Blackbag software works fine (read, send)
and the Arc sends fine ,it just wont read,
the radio says it's sending the data but the software
just sits there at 0 percent on the bar display..
the radio does 100 percent send and then starts scanning
again.


--- In [email protected], "Martin Brown" <martin.brownf14@b...> 
wrote:
> Hi,
>       Are you using a commercial interface with the R2 or are you 
using a
> home made one.  I had this problem and found out that it was the 
interface
>  I made my own) and I could only send to the R2 and not read.  It 
was
> actually a problem with the interface wiring which I sorted out 
and it now
> works okay.  I can only assume that there is something wrong with 
your
> interface.
> Regards
> Martin
> ----- Original Message -----
> From: Ray Darr <[email protected]>
> To: <[email protected]>
> Sent: Monday, 14 April, 2003 15:35
> Subject: [icomr2] R2 and ARC2 problem
> 
> 
> > Got my software and key installed.
> > I can send to the R2 just fine but when
> > I try to read from the R2 to ARC the radio
> > says its sending but the software never receives
> > any information. The bar in ARC stays empty and at 0..
> > anyone had this problem.. I am using a Intel P/3 and Win98..
> >
> >
> >
> >
> > Post message:   [email protected]
> > Subscribe:      [email protected]
> > Unsubscribe:    [email protected]
> > List owner:     [email protected]
> >
> >
> > Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/
> >
> >



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get a FREE REFINANCE QUOTE - click here!
http://us.click.yahoo.com/2CXtTB/ca0FAA/i5gGAA/ELTolB/TM
---------------------------------------------------------------------~->

Post message:   [email protected] 
Subscribe:      [email protected] 
Unsubscribe:    [email protected] 
List owner:     [email protected] 
 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/