Re: Re: using digital in Connecticut

The CSP system is a P16/25 3600 baud. The 250/785's work fine here in CT.

ML


  ----- Original Message ----- 
  From: fmonx 
  To: [email protected] 
  Sent: Thursday, March 22, 2007 9:32 PM
  Subject: [UnidenBC785D] Re: using digital in Connecticut


  You will need a 296/796 or 396/996 to trunk track CSPD as the system is 
  9600 baud digital. The 250/785 is 3600 digital. Programming trunking 
  systems is easy with ARC or ScanControl software.

  Digital freqs program the same as analog. 

  Frank

  --- In [email protected], "ckohanowski" <ckohanowski@...> 
  wrote:
  >
  > I have a bc780xlt and it is a great scanner. I was thinking of 
  > upgrading to a 785D and was wondering will it pick up CT state PD and 
  > others not encrypted? Also is this older digital technology that will 
  > be obsolete soon? I know nothing about the digital side and never did 
  > any trunking programming on the 780 as it looks difficult. Is it very 
  > difficult to program the digital frequencies or is it like 
  programming 
  > regular frequencies? Thanks for the help.
  >



   

[Non-text portions of this message have been removed]



If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..