Re: 785d

"fmonx" <fmonx-/[email protected]> Thu, 15 Nov 2007 19:18:23 -0000
Newsgroups gmane.recreation.radio.hardware.uniden.bc785d
Message-ID <[email protected]>
--- In [email protected], Robert Saenz Jr <mceiht08@...> wrote:
>
> frank excellent! it works. one question. everything worked fine then
i bought scannerstuff freq guide. entered there freqs and now i dont
hear anything. 
>

Do you hear a CC noise on any freq when on them manually? Press TRUNK
to check them (mine usually lands on the duty CC) but if not, use up
or down to step through the freqs.  Press Scan to return to scanning.  

> do control freqs have to be entered in last? or do freqs have to be
entered in order. 
>

If the system is Motorola in any flavor, the freqs can be placed
anywhere in the bank in any order.  However, I like them first in the
listings.  For Motorola 800 or 900, you can program only the Controls
and alternate Controls and set the proper CC only plan.  See OM page 67.

If the system is EDACS or LTR, the freqs need to be programmed into
the bank in LCN (Logical Channel Number) order, I.e., as listed in a
correct resource.  
This is my best resource. http://www.radioreference.com/index.php but
the list you have should be correct.  

>also when you enter an alpha tag for a talk group do you have to
enter what it says in the guide or can you enter your own id. ie: book
has listed as 9-chino-1 i want to use chino pd dispatch.
>

Any choice you desire can be use for the alpha tag up to 16
characters.  I always prefer your choice for dispatch and use Fire
Dispatch or EMS Dispatch for those agencies.  Same with any tag, fit
the description (within 16 characters) matching the group.  Tag the
freqs in the same fashion, match the system/tower/agency etc.  These
will then appear on lines three and four accordingly. During coms,line
4 correctly defined will indicate the particular scanlist name when
scanning in ID SCAN mode and 3 will define the talkgroup.  IMO, both
lines are invaluable for trunk scanning.

Frank






If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..