Re: Uniden 785 XLT

Hi Thanks for the message, i have tried that,but as soon as you hit the num=
ber you want to scan the number goes from the screen and leaves like a hyph=
en,and that it is all in the numbers up to 9,i cannot stop it from scanning=
 bank 1

Colin




________________________________
 From: "[email protected]" <[email protected]>
To: [email protected]=20
Sent: Monday, 22 April 2013, 3:30
Subject: Re: [UnidenBC785D] Uniden 785 XLT
=20


=C2=A0=20
I hi the bank numbers while it is scanning and they turn on then.


In a message dated 4/21/2013 10:26:31 P.M. Eastern Standard Time,=20
[email protected] writes:

Hi Guys. A long time since i posted on here,i need a little help if anyone=
=20
can help,could anyone tell me how to program channels into banks,every time=
=20
i  instigate a scan,it will begin to scan with bank 1 flashing,but how do=20
you get  from bank 1 to bank 2,because when i do try it the figure 2 just=20
disappears  from the screen and leaves just an hyphen in its place,this hap=
pens=20
to bank  4/5/6/and so on,any help would be appreciated.

Colin

[Non-text portions of this message have been removed]


=20

[Non-text portions of this message have been removed]



------------------------------------

If you have come here to find out about the 785D you have come to the right=
 place! In fact the discussion of the BC-785D and how it works is the only =
acceptable topic on this list. Any discussion about anything other than the=
 BC-785D is OFF TOPIC. I hope this is clear to all group members..