Re: Entering of a trunking system into PROSCAN then scanner

No Eric, it probably won't. The 785 receives the P25 3600baud digital=20
trunking not the newer 9600baud

ML

----- Original Message -----=20
From: "Eric Schweers" <ace1701d-/[email protected]>
To: <[email protected]>
Sent: Thursday, August 15, 2013 2:24 AM
Subject: Re: [UnidenBC785D] Entering of a trunking system into PROSCAN then=
=20
scanner


I have a 785 and yes it will work as long as you have the app code 25=20
digital card installed in your scanner and the frequency has not been=20
rebanded. As far as a restaurant you're talking about I'm not real sure.

Sent from my MOTOROLA BRAVO=E2=84=A2 on Consumer Cellular

-----Original message-----
From: MCH <[email protected]>
To: [email protected]
Sent: Thu, Aug 15, 2013 04:36:44 GMT+00:00
Subject: Re: [UnidenBC785D] Entering of a trunking system into PROSCAN then=
=20
scanner

Not sure what you mean by 1-1, 1-2, and 10-6. All the TGs should be in
decimal form such as 496, 528, and 3184.

That said, I wouldn't worry about getting it to work correctly, as they
will be soon upgrading the system to P25 which means your 785 won't work
on it.

Sorry for the bad news...

Joe M.

maccrimmon wrote:
> I have had scanners for a long time.  Think crystals.  This is my first=20
> trunking scanner and I am massively confused.  I recently moved to Fayett=
e=20
> county PA and want to enter their trunking system.
>
> This is what I believe to be true about the system, from=20
> RadioReference.Com:
>
> Motorola type 2 SmartNet
> 800 Mhz
>
> The talk groups are entered into the Trunk List tab.
> 1-1 =3D dec 496 MA14 Mutual Aid
> 1-2 =3D dec 528 MA15 Mutual Aid
>    and so on down to
> 10-6 =3D dec 3184 BORO SW PW Municipal Public Works - SW Boroughs
>
> OK, if that part is good, now on the Trunk Bank Setting tab on ProScan,=20
> what do I put in the Control Channel drop-down selection? Off, Plan 1,2,3=
=20
> or 4, or nothing?
>
> And do I enter the frequencies in the Frequencies tab in ProScan?  Where=
=20
> do the control freqs. get entered?
>
> Thank you for the help.
>
>
>
>
> ------------------------------------
>
> If you have come here to find out about the 785D you have come to the=20
> right place! In fact the discussion of the BC-785D and how it works is th=
e=20
> only acceptable topic on this list. Any discussion about anything other=20
> than the BC-785D is OFF TOPIC. I hope this is clear to a


[Non-text portions of this message have been removed]



------------------------------------

If you have come here to find out about the 785D you have come to the right=
=20
place! In fact the discussion of the BC-785D and how it works is the only=20
acceptable topic on this list. Any discussion about anything other than the=
=20
BC-785D is OFF TOPIC. I hope this is clear to all group members..