Re: Interference by cell towers
"j_multer" <[email protected]>
| Newsgroups | gmane.recreation.radio.hardware.uniden.bc785d |
|---|---|
| Message-ID | <[email protected]> |
>> I can have a good signal strengh and the RADIO is static-----wHAT ABOUT nEXTEL???? >> How can I overcome this problem-----filtering device? There are alot of possible reasons for your problem. Answering some questions, and some basic problem-solving, can help in identifying your problem. 1) Are you using a handheld or desktop scanner, is the scanner being powered off batteries or AC, and is the scanner connected to an external antenna ? 2) Do you experience the same problem if the scanner is moved to another room or location, including a location away from your residence ? 3) Do you have another scanner that has the same problem when trying to monitor the same system ? You could be receiving interference from other radio sources, such as cellular, PCS devices and Nextel. The interference could also be coming from sources in your residence, such as the electrical wiring, an internet connection or computer equipment. If you live in an apartment, or in closely-spaced homes, you might also be getting interference from a neighbor's residence. If the interference is originating from a cellular or Nextel source, and the direction of that source is different from the direction of the system you are trying to monitor, a directional antenna (yagi) may help. Attentuation might also help. I'm not familiar with any consumer-grade filters which would filter cellular interference without impacting the 800 public safety band. You can't filter Nextel, since their frequencies are interwoven among the same 800 MHz frequencies public safety is using. If the problem is related to a source in your residence, try moving the radio, and turning other equipment in the same room off-and-on while listening for the interference to disappear. Also listen while turning the circuit breakers in the residence off- and-on, since appliances, door bells, timers, etc can all introduce inteference into the electrical system. If the interference source is electrical in nature, you can sometimes eliminate or reduce the problem with consumer-grade electrical filters or chokes (avail at Radio Shack), or by improving the ground. You might also be able to turn the offending source off when monitoring. Jeff Multer Fort Mill, S.C. ------------------------ Yahoo! Groups Sponsor --------------------~--> $9.95 domain names from Yahoo!. Register anything. http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/DLTolB/TM --------------------------------------------------------------------~-> If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..