vhf/uhf output

"ki4nbo-/[email protected] [FT100]" <[email protected]>
Newsgroups gmane.recreation.radio.hardware.yaesu.ft100
Message-ID <[email protected]> 
anyone ever experienced lower than usual output on 2m and no output on 440?

rig indicates 20w on 440 with nothing measured on external meter..
2m indicates 50w on the rig with 20-30w measured on external meter...

would a bad final module put out around 30w if it was bad?

thanks
kevin ki4nbo
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.