Re: Help diagnosing no transmit problem.

"[email protected] [FT100]" <[email protected]>
Newsgroups gmane.recreation.radio.hardware.yaesu.ft100
Message-ID <[email protected]> 
Hi,



I think the problem is in ALC. You can press PTT but no power output any band....

You try with brick (jumper) ALC with resistor...you can find thatphoto at files menu of the group.

Sent by Gi0GDP  file name p1010217av.jpg  you need to solder via on the photo with cca 50ohm to GND if I remember corretly and then

Try if any power output...



73 de Andrej S57NML
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.