Re: Re: FT100 not folding back when high SWR (?)

I loaned out my FT100D to a friend yesterday so I don't have it here for
the values, but if you find K0LEE's FT100 FAQ it will have the values from
several rigs.  This link should work:

http://k0lee.com/ft100faq.php

I once had a used FT100D that I picked up that was putting out 150 watts
into a 3:1 SWR. I quickly got into the menus and fixed that.

73 John AF5CC

On Thu, May 31, 2018 at 7:32 PM, David Feldman wb0gaz-/[email protected] [FT100] <
[email protected]> wrote:

>
>
> Thanks, John - worth checking out.
>
> I had not previously archived any of the menu values; would you be able
> capture the applicable menu values from one of your radios and pass those
> along? I realize each radio can differ, but this could provide a useful
> starting point (as I have no other reference point.)
>
> Until I correct the problem, I'll run with 10A fuse as I certainly don't
> want to jeopardize the final amplifier transistors!
>
> 73 Dave WB0GAZ wb0gaz-/[email protected]
>
> ###
>
> 1b. Re: FT100 not folding back when high SWR (?)
> Posted by: "John Geiger" [email protected] af5cc
> Date: Wed May 30, 2018 7:34 pm ((PDT))
>
> It sounds like the ALC or SWR settings in the hidden menus might have been
> changed.
>
> 73 John AF5CC
> 
>