Re: RE: FC-20 power limits

Thanks for the replies.  Sounds like it would be ok to do 100 watts of RTTY
or other digital modes through it.  That is great to know!

73 John AF5CC

On Mon, Jul 9, 2018 at 8:58 AM, BOB RALPH [email protected] [FT100] <
[email protected]> wrote:

>
>
> Hi
> That's limited in a positive sense not negative. 100W out is 100W out FM
> or digital - the FC20 or the 30 (mine) will handle matching between 16 ohms
> or 150 ohms 'impedance' with the aim of achieving 100W as close as possible
> but with reduction in efficiency (loss) within the matcher ('tuner' to
> most).
> Bob G4KSG
> ----Original message----
> From : [email protected]
> Date : 09/07/2018 - 05:51 (BST)
> To : [email protected]
> Subject : RE: [FT100] FC-20 power limits
>
>
>
>
>
>
>
> The FC-20 has a rather limited impedance range. Thus, it might be able to
> handle full 100 W. The installation instructions I found don’t mention any
> restrictions.
> That said, some digital modes are sensitive to distortion and the typical
> way of reducing distortion is to reduce output power.
> 73,
> Wilko
> Sent from my Windows 10 phone
> From: John Geiger [email protected] [FT100]
> Sent: Monday, July 9, 2018 4:19
> To: [email protected]
> Subject: [FT100] FC-20 power limits
>
> Has anyone seen any mention from Yaesu about if the FC-20 autotuner has a
> lower power rating for the digital modes? I know both the LDG and MFJ
> tuners have much lower power ratings for digital modes (like 25 to 33% of
> max for other modes) but I have never seen any mention of this in the FC-20
> literature. Have people been running 100 watts on digital modes using the
> FC-20 tuner with ok results?
> 73 John AF5CC
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
> 
>