WSJT-X - no transmit audio

Is anyone used WSJT-X with FT100D? Can you tell me your WSJT-X rig 
configuration and any other configuration/menu setting you did? I am 
using an external USB sound card that is working fine.

I am not getting audio out from my computer to the FT100D. The sound 
card is fine, the cables going from sound card to the 6-pin data 
connector is fine. CAT control works perfectly. I'm stumped.

My WSJT-X rig settings:
PTT Method = CAT    Mode = USB
     Test CAT = Green
     Test PTT = Red
Tune/Transmitting in this configuration - Rig goes to transmit, but no 
audio out

PTT Method = CAT    Mode = Data/Pkt
     Test CAT = Green
     Test PTT = Red
Tune/Transmitting in this configuration - WSJT-X error message "Hamlib 
error - invalid parameter while setting current VFO mode"

PTT Method = CAT    Mode = Data/Pkt  and manually set FT100D to DIGI mode
WSJT-X switches mode to USB on transmit

Trying any other PTT method does not work

The FT100D works fine when working SSB with mic.

Thanks for any help,
Roy K2RMA


-- 
***************************************************************
* No trees were destroyed in the sending of this message,
* however, a significant number of electrons were terribly inconvenienced
***************************************************************