RE: securing thr main tuning knob ?
| Newsgroups | gmane.recreation.radio.hardware.yaesu.ft100 |
|---|---|
| Message-ID | <[email protected]> |
Carefully peel off the rubber. You will need a 1.5 mm hex key. 73, Wilko Sent from my Windows 10 device From: John Geiger [email protected] [FT100] Sent: Friday, October 5, 2018 6:57 To: [email protected] Subject: Re: [FT100] securing thr main tuning knob ? The main tuning knob is held on by a Allen type setscrew. 73 John AF5CC On Thu, Oct 4, 2018 at 7:52 PM Patricia Wilson [email protected] [FT100] <[email protected]> wrote: mods.dk has downloadable service manuals for the ft-100 and pretty much everything else. It also has lots of mods documents hence the name. On Wed, Oct 3, 2018 at 11:13 PM johnkf7om-/[email protected] [FT100] <[email protected]> wrote: Having just bought an FT 100D, the main tuning knob is loose and wobbley but still works to change freqs with no problem. I want to know how the knob is attached to the brass threaded channel that goes into the encoder? mine is attached with a round spring but does not " pullin" enough to fully seat the knob. that's all I can find on this radio that is used to hold it together. Seems like its missing a part or so. Anybody have an exploded view of the encoder with attachment parts and parts that secure it? Thanks John KF7OM -- Patricia Wilson Apache Junction, AZ Member NRA, ARRL WB8DXX (Extra) [Non-text portions of this message have been removed]