Re: Disassembly of the VR-500?

and if that does not cure the problem google  VR 500 service manual and that shows how to dismantle
Jim


--- On Thu, 18/9/08, Ulrich Heidenreich <[email protected]> wrote:

From: Ulrich Heidenreich <[email protected]>
Subject: Re: [VR-500] Disassembly of the VR-500?
To: [email protected]
Date: Thursday, 18 September, 2008, 7:51 AM






Hello, jzagar53,

>How tough is it to disassemble the VR-500 to get down to the speaker 
>level? I need to fix the speaker contacts that apparently become 
>intermittent due to oxidation causing audio to cut in and out. 

I can't help you directly, but are you sure, it's the speaker wire?

Recently I've had the same problem: It results in some dust - or
oxidation as you assume - in the earphone jacket, just switching 
the speaker sometimes off, as if there was a plug in it.

I've used some contact cleaner spray and plugging/unplugging an 
earphone several times to solve that problem.

Regards,
Ulrich
-- 
Sorry: English isn't my native language.
So please don't feel confused by that
dialect, I'm perhaps using instead ;-) 
 













[Non-text portions of this message have been removed]