Re: USB PROGRAMMING CABLE WORKS!

I received my second cable today and I confirmed that the 4 pin plug will need to be modified to the 3 pin stereo plug for it to work.  



--- In [email protected], Barry Gee <mailinglist@...> wrote:
>
> I too am having issues with a usb to sp jack cable linking my vr-500- to 
> my pc, when ever i try to send from the vr-500 to the pc i get a comm 
> port time out error on the pc and an error 14 or 16 (if my memory serves 
> me rite) on the receiver. ive tried everything i can think of. The 
> strange thing is, is that the amount of time it takes the error to occur 
> differs even though i dont change any settings. Sometimes i get the 
> errors immediately other times to progress bar will go across what looks 
> like around 95% and then error. very strange and frustrating.
> 
> Barry.
> 
> 
> 
> pcango wrote:
> >  
> >
> > I purchased a USB programming cable off ebay that supports several 
> > Yaesu radios . Ebay Item # 380163698408 , it comes with cable & driver 
> > disk. The cable has a 4 pin plug. I replaced that plug with a 3 pin 
> > stereo plug from Radioshack . After having communication problems with 
> > my PC and exhausted all efforts to get it to work I thought that I 
> > would give it a try on my Asus netbook .
> > After installing the drivers I plugged in the USB cable and connected 
> > the VR-500. It worked !! I was able to read and wright without errors. 
> > Not too bad for a cable that cost about 10.00 including shipping. I 
> > ordered another one for a backup and also to see if it will work 
> > without the plug modification . FYI *** My PC communication problem 
> > was coming from my cheap 7 port USB hub. ***
> >
> >
>