Re: (no subject)

Bob Doan <bdoan-J0aWFLYJOWhWk0Htik3J/[email protected]> Thu, 12 May 2005 19:56:55 -0400
Newsgroups gmane.text.rlib.user
Message-ID <[email protected]>
Make sure you have:

gd
gd-devel
gd-progs 

installed

- bob

On Thu, 2005-05-12 at 16:32 -0700, Dimitar Balinov wrote:
> Hi, Bob! I have a problem, again! When I run
> ./configure everything seems OK, but when I run make
> there is a error: The output from make is:
> 
> make  all-recursive
> make[1]: Entering directory
> `/root/software/rlib-1.3.3'
> Making all in rpdf
> make[2]: Entering directory
> `/root/software/rlib-1.3.3/rpdf'
> source='rpdf.c' object='rpdf.lo' libtool=yes \
> depfile='.deps/rpdf.Plo' tmpdepfile='.deps/rpdf.TPlo'
> \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include     -g -O2 -c -o
> rpdf.lo `test -f 'rpdf.c' || echo './'`rpdf.c
> mkdir .libs
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -g -O2 -c rpdf.c -MT
> rpdf.lo -MD -MP -MF .deps/rpdf.TPlo  -fPIC-DPIC -o
> .libs/rpdf.o
> /bin/sh ../libtool --mode=link gcc -D_GNU_SOURCE
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include     -g -O2   -o
> librpdf.la -rpath /usr/local/lib -version-info 4:3:3 
> rpdf.lo  -L/opt/gnome/lib -lglib-2.0  
> -Wl,--export-dynamic -L/opt/gnome/lib -lgmodule-2.0
> -ldl -lglib-2.0    -lm -lc
> gcc -shared  .libs/rpdf.o  -L/opt/gnome/lib
> /opt/gnome/lib/libgmodule-2.0.so -ldl
> /opt/gnome/lib/libglib-2.0.so -lm -lc 
> -Wl,--export-dynamic -Wl,-soname -Wl,librpdf.so.1 -o
> .libs/librpdf.so.1.3.3
> (cd .libs && rm -f librpdf.so.1 && ln -s
> librpdf.so.1.3.3 librpdf.so.1)
> (cd .libs && rm -f librpdf.so && ln -s
> librpdf.so.1.3.3 librpdf.so)
> creating librpdf.la
> (cd .libs && rm -f librpdf.la && ln -s ../librpdf.la
> librpdf.la)
> source='test.c' object='test.o' libtool=no \
> depfile='.deps/test.Po' tmpdepfile='.deps/test.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I..    -D_GNU_SOURCE
> -I/opt/gnome/include/glib-2.0-I/opt/gnome/lib/glib-2.0/include
>   -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include     -g -O2 -c `test
> -f 'test.c' || echo './'`test.c
> /bin/sh ../libtool --mode=link gcc -D_GNU_SOURCE
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include     -g -O2   -o test
>  test.o librpdf.la -lm -lm -lc
> gcc -D_GNU_SOURCE -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -g -O2 -o .libs/test
> test.o  ./.libs/librpdf.so -L/opt/gnome/lib
> /opt/gnome/lib/libgmodule-2.0.so -ldl
> /opt/gnome/lib/libglib-2.0.so -lm -lc
> creating test
> make[2]: Leaving directory
> `/root/software/rlib-1.3.3/rpdf'
> Making all in libsrc
> make[2]: Entering directory
> `/root/software/rlib-1.3.3/libsrc'
> source='parsexml.c' object='parsexml.lo' libtool=yes \
> depfile='.deps/parsexml.Plo'
> tmpdepfile='.deps/parsexml.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o parsexml.lo `test -f 'parsexml.c' || echo
> './'`parsexml.c
> mkdir .libs
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c parsexml.c -MT
> parsexml.lo -MD -MP -MF .deps/parsexml.TPlo  -fPIC
> -DPIC -o .libs/parsexml.o
> source='reportgen.c' object='reportgen.lo' libtool=yes
> \
> depfile='.deps/reportgen.Plo'
> tmpdepfile='.deps/reportgen.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o reportgen.lo `test-f 'reportgen.c' || echo
> './'`reportgen.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c reportgen.c -MT
> reportgen.lo -MD -MP -MF .deps/reportgen.TPlo  -fPIC
> -DPIC -o .libs/reportgen.o
> source='layout.c' object='layout.lo' libtool=yes \
> depfile='.deps/layout.Plo'
> tmpdepfile='.deps/layout.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o layout.lo `test -f'layout.c' || echo
> './'`layout.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c layout.c -MT
> layout.lo -MD -MP -MF .deps/layout.TPlo  -fPIC -DPIC
> -o .libs/layout.o
> source='graphing.c' object='graphing.lo' libtool=yes \
> depfile='.deps/graphing.Plo'
> tmpdepfile='.deps/graphing.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o graphing.lo `test -f 'graphing.c' || echo
> './'`graphing.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c graphing.c -MT
> graphing.lo -MD -MP -MF .deps/graphing.TPlo  -fPIC
> -DPIC -o .libs/graphing.o
> source='api.c' object='api.lo' libtool=yes \
> depfile='.deps/api.Plo' tmpdepfile='.deps/api.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o api.lo `test -f 'api.c' || echo './'`api.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c api.c -MT api.lo
> -MD -MP -MF .deps/api.TPlo  -fPIC -DPIC -o .libs/api.o
> source='resolution.c' object='resolution.lo'
> libtool=yes \
> depfile='.deps/resolution.Plo'
> tmpdepfile='.deps/resolution.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o resolution.lo `test -f 'resolution.c' ||
> echo './'`resolution.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c resolution.c -MT
> resolution.lo -MD -MP -MF .deps/resolution.TPlo  -fPIC
> -DPIC -o .libs/resolution.o
> source='util.c' object='util.lo' libtool=yes \
> depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo'
> \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o util.lo `test -f 'util.c' || echo
> './'`util.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c util.c -MT util.lo
> -MD -MP -MF .deps/util.TPlo  -fPIC -DPIC -o
> .libs/util.o
> source='pcode.c' object='pcode.lo' libtool=yes \
> depfile='.deps/pcode.Plo'
> tmpdepfile='.deps/pcode.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o pcode.lo `test -f 'pcode.c' || echo
> './'`pcode.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c pcode.c -MT
> pcode.lo -MD -MP -MF .deps/pcode.TPlo  -fPIC -DPIC -o
> .libs/pcode.o
> source='pcode_op_functions.c'
> object='pcode_op_functions.lo' libtool=yes \
> depfile='.deps/pcode_op_functions.Plo'
> tmpdepfile='.deps/pcode_op_functions.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o pcode_op_functions.lo `test -f
> 'pcode_op_functions.c' || echo
> './'`pcode_op_functions.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c
> pcode_op_functions.c -MT pcode_op_functions.lo -MD -MP
> -MF .deps/pcode_op_functions.TPlo  -fPIC -DPIC -o
> .libs/pcode_op_functions.o
> source='formatstring.c' object='formatstring.lo'
> libtool=yes \
> depfile='.deps/formatstring.Plo'
> tmpdepfile='.deps/formatstring.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o formatstring.lo `test -f 'formatstring.c' ||
> echo './'`formatstring.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c formatstring.c -MT
> formatstring.lo -MD -MP -MF .deps/formatstring.TPlo 
> -fPIC -DPIC -o .libs/formatstring.o
> source='fxp.c' object='fxp.lo' libtool=yes \
> depfile='.deps/fxp.Plo' tmpdepfile='.deps/fxp.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o fxp.lo `test -f 'fxp.c' || echo './'`fxp.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c fxp.c -MT fxp.lo
> -MD -MP -MF .deps/fxp.TPlo  -fPIC -DPIC -o .libs/fxp.o
> source='gd.c' object='gd.lo' libtool=yes \
> depfile='.deps/gd.Plo' tmpdepfile='.deps/gd.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H
> -I. -I. -I..    -D_GNU_SOURCE -Wall -Wchar-subscripts
> -I/usr/local/include/libxml2  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include  
> -I/usr/include/mysql -Os -pipe -march=pentium2
> -fomit-frame-pointer   -I/usr/include   -I../rpdf -g
> -O2 -c -o gd.lo `test -f 'gd.c' || echo './'`gd.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_GNU_SOURCE -Wall
> -Wchar-subscripts -I/usr/local/include/libxml2
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include
> -I/opt/gnome/include/glib-2.0
> -I/opt/gnome/lib/glib-2.0/include -I/usr/include/mysql
> -Os -pipe -march=pentium2 -fomit-frame-pointer
> -I/usr/include -I../rpdf -g -O2 -c gd.c -MT gd.lo -MD
> -MP -MF .deps/gd.TPlo  -fPIC -DPIC -o .libs/gd.o
> In file included from gd.c:44:
> rlib_gd.h:24:16: gd.h: No such file or directory
> rlib_gd.h:25:21: gdfontt.h: No such file or directory
> rlib_gd.h:26:21: gdfonts.h: No such file or directory
> rlib_gd.h:27:22: gdfontmb.h: No such file or directory
> In file included from rlib_gd.h:28,
>                  from gd.c:44:
> gdFontMedium.h:16:16: gd.h: No such file or directory
> In file included from rlib_gd.h:28,
>                  from gd.c:44:
> gdFontMedium.h:18: error: parse error before
> "gdFontMedium"
> gdFontMedium.h:18: warning: type defaults to `int' in
> declaration of `gdFontMedium'
> gdFontMedium.h:18: warning: data definition has no
> type or storage class
> In file included from gd.c:44:
> rlib_gd.h:29:21: gdfontl.h: No such file or directory
> rlib_gd.h:30:21: gdfontg.h: No such file or directory
> In file included from gd.c:44:
> rlib_gd.h:37: error: parse error before "gdImagePtr"
> rlib_gd.h:37: warning: no semicolon at end of struct
> or union
> rlib_gd.h:41: error: `gdMaxColors' undeclared here
> (not in a function)
> rlib_gd.h:42: error: `gdMaxColors' undeclared here
> (not in a function)
> rlib_gd.h:46: error: parse error before '}' token
> gd.c: In function `get_color_pool':
> gd.c:69: error: `gdMaxColors' undeclared (first use in
> this function)
> gd.c:69: error: (Each undeclared identifier is
> reported only once
> gd.c:69: error: for each function it appears in.)
> gd.c:70: error: dereferencing pointer to incomplete
> type
> gd.c:71: error: dereferencing pointer to incomplete
> type
> gd.c:72: error: dereferencing pointer to incomplete
> type
> gd.c:74: error: dereferencing pointer to incomplete
> type
> gd.c:74: warning: implicit declaration of function
> `gdImageColorAllocate'
> gd.c:74: error: dereferencing pointer to incomplete
> type
> gd.c:75: error: dereferencing pointer to incomplete
> type
> gd.c:76: error: dereferencing pointer to incomplete
> type
> gd.c: In function `rlib_gd_new':
> gd.c:85: error: invalid application of `sizeof' to an
> incomplete type
> gd.c:90: error: invalid application of `sizeof' to an
> incomplete type
> gd.c:92: error: `gdMaxColors' undeclared (first use in
> this function)
> gd.c:93: error: dereferencing pointer to incomplete
> type
> gd.c:96: error: dereferencing pointer to incomplete
> type
> gd.c:96: warning: implicit declaration of function
> `gdImageCreate'
> gd.c:109: error: dereferencing pointer to incomplete
> type
> gd.c:110: error: dereferencing pointer to incomplete
> type
> gd.c:110: error: dereferencing pointer to incomplete
> type
> gd.c:111: error: dereferencing pointer to incomplete
> type
> gd.c:111: error: dereferencing pointer to incomplete
> type
> gd.c:112: warning: implicit declaration of function
> `gdImageFilledRectangle'
> gd.c:112: error: dereferencing pointer to incomplete
> type
> gd.c:112: error: dereferencing pointer to incomplete
> type
> gd.c:113: warning: implicit declaration of function
> `gdImageRectangle'
> gd.c:113: error: dereferencing pointer to incomplete
> type
> gd.c:113: error: dereferencing pointer to incomplete
> type
> gd.c: In function `rlib_gd_spool':
> gd.c:120: error: dereferencing pointer to incomplete
> type
> gd.c:122: warning: implicit declaration of function
> `gdImagePng'
> gd.c:122: error: dereferencing pointer to incomplete
> type
> gd.c:125: error: dereferencing pointer to incomplete
> type
> gd.c: In function `rlib_gd_text':
> gd.c:133: warning: implicit declaration of function
> `gdImageStringUp'
> gd.c:133: error: dereferencing pointer to incomplete
> type
> gd.c:133: error: `gdFontMediumBold' undeclared (first
> use in this function)
> gd.c:133: error: dereferencing pointer to incomplete
> type
> gd.c:135: warning: implicit declaration of function
> `gdImageString'
> gd.c:135: error: dereferencing pointer to incomplete
> type
> gd.c:135: error: dereferencing pointer to incomplete
> type
> gd.c:138: error: dereferencing pointer to incomplete
> type
> gd.c:138: error: dereferencing pointer to incomplete
> type
> gd.c:140: error: dereferencing pointer to incomplete
> type
> gd.c:140: error: dereferencing pointer to incomplete
> type
> gd.c: In function `rlib_gd_get_string_width':
> gd.c:147: error: `gdFontMediumBold' undeclared (first
> use in this function)
> gd.c:149: error: invalid type argument of `->'
> gd.c: In function `rlib_gd_get_string_height':
> gd.c:154: error: `gdFontMediumBold' undeclared (first
> use in this function)
> gd.c:156: error: invalid type argument of `->'
> gd.c: In function `rlib_gd_set_thickness':
> gd.c:160: warning: implicit declaration of function
> `gdImageSetThickness'
> gd.c:160: error: dereferencing pointer to incomplete
> type
> gd.c: In function `rlib_gd_line':
> gd.c:171: error: dereferencing pointer to incomplete
> type
> gd.c:173: warning: implicit declaration of function
> `gdImageLine'
> gd.c:173: error: dereferencing pointer to incomplete
> type
> gd.c: In function `rlib_gd_rectangle':
> gd.c:190: error: dereferencing pointer to incomplete
> type
> gd.c:192: error: dereferencing pointer to incomplete
> type
> gd.c: In function `rlib_gd_arc':
> gd.c:204: error: dereferencing pointer to incomplete
> type
> gd.c:206: warning: implicit declaration of function
> `gdImageFilledArc'
> gd.c:206: error: dereferencing pointer to incomplete
> type
> gd.c:206: error: `gdArc' undeclared (first use in this
> function)
> gd.c: In function `rlib_gd_free':
> gd.c:212: warning: implicit declaration of function
> `gdImageDestroy'
> gd.c:212: error: dereferencing pointer to incomplete
> type
> gd.c:213: error: dereferencing pointer to incomplete
> type
> gd.c: At top level:
> rlib_gd.h:41: error: storage size of `color_pool'
> isn't known
> rlib_gd.h:42: error: storage size of `rlib_color'
> isn't known
> make[2]: *** [gd.lo] Error 1
> make[2]: Leaving directory
> `/root/software/rlib-1.3.3/libsrc'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/root/software/rlib-1.3.3'
> make: *** [all] Error 2
> 
> --- Bob Doan <bdoan-J0aWFLYJOWhWk0Htik3J/[email protected]> wrote:
> > You probably want --with-pythonver=2.3
> > 
> > - bob
> > 
> > On Thu, 2005-05-12 at 12:43 -0700, Dimitar Balinov
> > wrote:
> > > Hi!!! I install python-devel and mysql-devel, but
> > I
> > > have a problem with python! I use python 2.3.4 on
> > SuSE
> > >   
> > > 9.2 with python-devel 2.3.4 release 1. 
> > > --- Bob Doan <bdoan-J0aWFLYJOWhWk0Htik3J/[email protected]> wrote:
> > > > What distro are you running?
> > > > 
> > > > Make sure you have packages like "python-devel"
> > and
> > > > mysql-devel
> > > > installed
> > > > 
> > > > So RLIB can find them during autoconf
> > > > 
> > > > - bob
> > > > 
> > > > On Thu, 2005-05-12 at 08:07 -0700, Dimitar
> > Balinov
> > > > wrote:
> > > > > Hi! I have a qustion! How can I compile rlib
> > with
> > > > > mysql and python! 
> > > > > 
> > > > > 
> > > > 
> > > > 
> > > 
> > > 
> > > 		
> > > __________________________________ 
> > > Do you Yahoo!? 
> > > Yahoo! Mail - Find what you need with new enhanced
> > search. 
> > > http://info.mail.yahoo.com/mail_250
> > 
> > 
> 
> 
> 		
> Yahoo! Mail
> Stay connected, organized, and protected. Take the tour:
> http://tour.mail.yahoo.com/mailtour.html
-- 
Bob Doan <bdoan-J0aWFLYJOWhWk0Htik3J/[email protected]>



-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click