svn commit: r1295927 - in /xalan/c/trunk/xdocs: DoxyfileXalan html/apiDocs/ApacheLogo.jpg html/apiDocs/asf_logo_wide.gif html/apiDocs/diagramnotes.html html/apiDocs/footer.html html/apiDocs/header-local.html html/apiDocs/header.html html/apiDocs/tail.html
[email protected] Thu, 01 Mar 2012 21:57:11 -0000
| Newsgroups | gmane.text.xml.xalan.cvs |
|---|---|
| Message-ID | <[email protected]> |
Author: shathaway
Date: Thu Mar 1 21:57:10 2012
New Revision: 1295927
URL: http://svn.apache.org/viewvc?rev=1295927&view=rev
Log:
Updates for Xalan-C apiDocs
Added:
xalan/c/trunk/xdocs/html/apiDocs/asf_logo_wide.gif (with props)
xalan/c/trunk/xdocs/html/apiDocs/header-local.html
Removed:
xalan/c/trunk/xdocs/html/apiDocs/ApacheLogo.jpg
xalan/c/trunk/xdocs/html/apiDocs/diagramnotes.html
xalan/c/trunk/xdocs/html/apiDocs/tail.html
Modified:
xalan/c/trunk/xdocs/DoxyfileXalan
xalan/c/trunk/xdocs/html/apiDocs/footer.html
xalan/c/trunk/xdocs/html/apiDocs/header.html
Modified: xalan/c/trunk/xdocs/DoxyfileXalan
URL: http://svn.apache.org/viewvc/xalan/c/trunk/xdocs/DoxyfileXalan?rev=1295927&r1=1295926&r2=1295927&view=diff
==============================================================================
--- xalan/c/trunk/xdocs/DoxyfileXalan (original)
+++ xalan/c/trunk/xdocs/DoxyfileXalan Thu Mar 1 21:57:10 2012
@@ -1,572 +1,333 @@
-# Doxyfile 1.1.2
-
-# Xerces-C Note: Make sure that you run Doxygen from the 'doc' directory
-# where this configuraton file resides.
-
-# This file describes the settings to be used by doxygen for a project
+# FILE: DoxyfileXalan
+#
+# This file is automatically generated using DOXYWIZARD
+# to create web pages for the Apache XALAN-C project.
+#
+# Software Release Versions Used
+# doxygen version 1.71
+# graphviz version 2.26.3
+#
+# The apiDocs web pages are created by invoking the following command:
+# doxygen DoxyfileXalan
+#
+# After the web pages are created in directory ../build/docs/apiDocs/html/
+# you should copy the apache feather logo image into that directory.
+#
+# cp html/apiDocs/asf_logo_wide.gif ../build/docs/apiDocs/html
#
-# All text after a hash (#) is considered a comment and will be ignored
-# The format is:
-# TAG = value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
-
#---------------------------------------------------------------------------
-# General configuration options
+# Project related configuration options
#---------------------------------------------------------------------------
-
-# The PROJECT_NAME tag is a single word (or a sequence of word surrounded
-# by quotes) that should identify the project.
-
-PROJECT_NAME = "Xalan-C++"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-# not using -- don't like where it appears; release num is in sources -- dml
-PROJECT_NUMBER =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY = ../build/docs
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Dutch, French, Italian, Czech, Swedish, German and Japanese
-
-OUTPUT_LANGUAGE = English
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET = NO
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS = YES
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
-
-DISABLE_INDEX = NO
-
-# If the EXTRACT_ALL tag is set to YES all classes and functions will be
-# included in the documentation, even if no documentation was available.
-
-EXTRACT_ALL = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members inside documented classes or files.
-
-HIDE_UNDOC_MEMBERS = YES
-
-# If the HIDE_UNDOC_CLASSESS tag is set to YES, Doxygen will hide all
-# undocumented classes.
-
-HIDE_UNDOC_CLASSES = YES
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF = YES
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path.
-
-STRIP_FROM_PATH =
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS = NO
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a class diagram (in Html and LaTeX) for classes with base or
-# super classes. Setting the tag to NO turns the diagrams off.
-
-CLASS_DIAGRAMS = YES
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-
-SOURCE_BROWSER = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS = YES
-
-# If the CASE_SENSE_NAMES tag is set to NO (the default) then Doxygen
-# will only generate file names in lower case letters. If set to
-# YES upper case letters are also allowed. This is useful if you have
-# classes or files whose names only differ in case and if your file system
-# supports case sensitive file names.
-
-CASE_SENSE_NAMES = YES
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS = YES
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES (the default) then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the Javadoc-style will
-# behave just like the Qt-style comments.
-
-JAVADOC_AUTOBRIEF = YES
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# reimplements.
-
-INHERIT_DOCS = YES
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO = NO
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS = YES
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE = 4
-
-# The ENABLE_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS =
+DOXYFILE_ENCODING = UTF-8
+PROJECT_NAME = "Xalan-C++ API"
+PROJECT_NUMBER =
+OUTPUT_DIRECTORY = ../build/docs/apiDocs
+CREATE_SUBDIRS = NO
+OUTPUT_LANGUAGE = English
+BRIEF_MEMBER_DESC = YES
+REPEAT_BRIEF = YES
+ABBREVIATE_BRIEF = "The $name class" \
+ "The $name widget" \
+ "The $name file" \
+ is \
+ provides \
+ specifies \
+ contains \
+ represents \
+ a \
+ an \
+ the
+ALWAYS_DETAILED_SEC = NO
+INLINE_INHERITED_MEMB = NO
+FULL_PATH_NAMES = NO
+STRIP_FROM_PATH =
+STRIP_FROM_INC_PATH =
+SHORT_NAMES = NO
+JAVADOC_AUTOBRIEF = YES
+QT_AUTOBRIEF = NO
+MULTILINE_CPP_IS_BRIEF = NO
+INHERIT_DOCS = YES
+SEPARATE_MEMBER_PAGES = NO
+TAB_SIZE = 8
+ALIASES =
+OPTIMIZE_OUTPUT_FOR_C = NO
+OPTIMIZE_OUTPUT_JAVA = NO
+OPTIMIZE_FOR_FORTRAN = NO
+OPTIMIZE_OUTPUT_VHDL = NO
+EXTENSION_MAPPING =
+BUILTIN_STL_SUPPORT = NO
+CPP_CLI_SUPPORT = NO
+SIP_SUPPORT = NO
+IDL_PROPERTY_SUPPORT = YES
+DISTRIBUTE_GROUP_DOC = NO
+SUBGROUPING = YES
+TYPEDEF_HIDES_STRUCT = NO
+SYMBOL_CACHE_SIZE = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+EXTRACT_ALL = YES
+EXTRACT_PRIVATE = NO
+EXTRACT_STATIC = NO
+EXTRACT_LOCAL_CLASSES = YES
+EXTRACT_LOCAL_METHODS = NO
+EXTRACT_ANON_NSPACES = NO
+HIDE_UNDOC_MEMBERS = NO
+HIDE_UNDOC_CLASSES = NO
+HIDE_FRIEND_COMPOUNDS = NO
+HIDE_IN_BODY_DOCS = NO
+INTERNAL_DOCS = NO
+CASE_SENSE_NAMES = YES
+HIDE_SCOPE_NAMES = NO
+SHOW_INCLUDE_FILES = YES
+FORCE_LOCAL_INCLUDES = NO
+INLINE_INFO = YES
+SORT_MEMBER_DOCS = YES
+SORT_BRIEF_DOCS = NO
+SORT_MEMBERS_CTORS_1ST = NO
+SORT_GROUP_NAMES = NO
+SORT_BY_SCOPE_NAME = NO
+GENERATE_TODOLIST = YES
+GENERATE_TESTLIST = YES
+GENERATE_BUGLIST = YES
+GENERATE_DEPRECATEDLIST= YES
+ENABLED_SECTIONS =
+MAX_INITIALIZER_LINES = 30
+SHOW_USED_FILES = YES
+SHOW_DIRECTORIES = NO
+SHOW_FILES = YES
+SHOW_NAMESPACES = YES
+FILE_VERSION_FILTER =
+LAYOUT_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+QUIET = NO
+WARNINGS = YES
+WARN_IF_UNDOCUMENTED = YES
+WARN_IF_DOC_ERROR = YES
+WARN_NO_PARAMDOC = NO
+WARN_FORMAT = "$file:$line: $text"
+WARN_LOGFILE =
#---------------------------------------------------------------------------
# configuration options related to the input files
#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT = ../src/xalanc/DOMSupport ../src/xalanc/Harness ../src/xalanc/ICUBridge ../src/xalanc/Include ../src/xalanc/PlatformSupport ../src/xalanc/TestXPath ../src/xalanc/TestXSLT ../src/xalanc/Utils/ ../src/xalanc/XalanDOM ../src/xalanc/XalanExe ../src/xalanc/XalanEXSLT ../src/xalanc/XalanExtensions ../src/xalanc/XalanSourceTree ../src/xalanc/XalanTransformer ../src/xalanc/XercesParserLiaison ../src/xalanc/XercesParserLiaison/Deprecated ../src/xalanc/XMLSupport ../src/xalanc/XPath ../src/xalanc/XPathCAPI ../src/xalanc/XSLT
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-FILE_PATTERNS = *.hpp *.h
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE = NO
-
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE =
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-
-EXCLUDE_PATTERNS =
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS =
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output.
-
-INPUT_FILTER =
+INPUT = ../src/xalanc \
+ ../src/xalanc/Utils/MsgCreator \
+ ../src/xalanc/Utils/XalanMsgLib \
+ ../src/xalanc/XalanExtensions \
+ ../src/xalanc/Harness \
+ ../src/xalanc/TestXSLT \
+ ../src/xalanc/XalanSourceTree \
+ ../src/xalanc/XSLT \
+ ../src/xalanc/NLS \
+ ../src/xalanc/Include \
+ ../src/xalanc/XalanTransformer \
+ ../src/xalanc/ICUBridge \
+ ../src/xalanc/DOMSupport \
+ ../src/xalanc/PlatformSupport \
+ ../src/xalanc/TestXPath \
+ ../src/xalanc/XalanExe \
+ ../src/xalanc/XPathCAPI \
+ ../src/xalanc/XalanDOM \
+ ../src/xalanc/XercesParserLiaison \
+ ../src/xalanc/XercesParserLiaison/Deprecated \
+ ../src/xalanc/XalanEXSLT \
+ ../src/xalanc/XMLSupport \
+ ../src/xalanc/XPath
+INPUT_ENCODING = UTF-8
+FILE_PATTERNS = *.hpp \
+ *.h
+RECURSIVE = NO
+EXCLUDE =
+EXCLUDE_SYMLINKS = NO
+EXCLUDE_PATTERNS =
+EXCLUDE_SYMBOLS =
+EXAMPLE_PATH =
+EXAMPLE_PATTERNS = *
+EXAMPLE_RECURSIVE = NO
+IMAGE_PATH =
+INPUT_FILTER =
+FILTER_PATTERNS =
+FILTER_SOURCE_FILES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+SOURCE_BROWSER = YES
+INLINE_SOURCES = NO
+STRIP_CODE_COMMENTS = NO
+REFERENCED_BY_RELATION = NO
+REFERENCES_RELATION = NO
+REFERENCES_LINK_SOURCE = YES
+USE_HTAGS = NO
+VERBATIM_HEADERS = YES
#---------------------------------------------------------------------------
-# configuration options related to the HTML output
+# configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output
-
-GENERATE_HTML = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT = apiDocs
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
-
-HTML_HEADER = html/apiDocs/header.html
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER = html/apiDocs/footer.html
-
-# The HTML_STYLESHEET tag can be used to specify a user defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet
-
-HTML_STYLESHEET =
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP = NO
+ALPHABETICAL_INDEX = YES
+COLS_IN_ALPHA_INDEX = 3
+IGNORE_PREFIX =
#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
+# configuration options related to the HTML output
#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX = 3
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX =
+GENERATE_HTML = YES
+HTML_OUTPUT = html
+HTML_FILE_EXTENSION = .html
+HTML_HEADER = html/apiDocs/header-local.html
+HTML_FOOTER = html/apiDocs/footer.html
+HTML_STYLESHEET =
+HTML_COLORSTYLE_HUE = 220
+HTML_COLORSTYLE_SAT = 100
+HTML_COLORSTYLE_GAMMA = 80
+HTML_TIMESTAMP = YES
+HTML_ALIGN_MEMBERS = NO
+HTML_DYNAMIC_SECTIONS = NO
+GENERATE_DOCSET = NO
+DOCSET_FEEDNAME = "Doxygen generated docs"
+DOCSET_BUNDLE_ID = org.doxygen.Project
+DOCSET_PUBLISHER_ID = org.doxygen.Publisher
+DOCSET_PUBLISHER_NAME = Publisher
+GENERATE_HTMLHELP = NO
+CHM_FILE =
+HHC_LOCATION =
+GENERATE_CHI = NO
+CHM_INDEX_ENCODING =
+BINARY_TOC = NO
+TOC_EXPAND = NO
+GENERATE_QHP = NO
+QCH_FILE =
+QHP_NAMESPACE = org.doxygen.Project
+QHP_VIRTUAL_FOLDER = doc
+QHP_CUST_FILTER_NAME =
+QHP_CUST_FILTER_ATTRS =
+QHP_SECT_FILTER_ATTRS =
+QHG_LOCATION =
+GENERATE_ECLIPSEHELP = NO
+ECLIPSE_DOC_ID = org.doxygen.Project
+DISABLE_INDEX = NO
+ENUM_VALUES_PER_LINE = 4
+GENERATE_TREEVIEW = NO
+USE_INLINE_TREES = NO
+TREEVIEW_WIDTH = 250
+EXT_LINKS_IN_WINDOW = NO
+FORMULA_FONTSIZE = 10
+FORMULA_TRANSPARENT = YES
+SEARCHENGINE = NO
+SERVER_BASED_SEARCH = NO
#---------------------------------------------------------------------------
# configuration options related to the LaTeX output
#---------------------------------------------------------------------------
+GENERATE_LATEX = NO
+LATEX_OUTPUT = latex
+LATEX_CMD_NAME = latex
+MAKEINDEX_CMD_NAME = makeindex
+COMPACT_LATEX = NO
+PAPER_TYPE = a4wide
+EXTRA_PACKAGES =
+LATEX_HEADER =
+PDF_HYPERLINKS = YES
+USE_PDFLATEX = YES
+LATEX_BATCHMODE = NO
+LATEX_HIDE_INDICES = NO
+LATEX_SOURCE_CODE = NO
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT = latex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, a4wide, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS = NO
-
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-LATEX_BATCHMODE = NO
#---------------------------------------------------------------------------
# configuration options related to the RTF output
#---------------------------------------------------------------------------
+GENERATE_RTF = NO
+RTF_OUTPUT = rtf
+COMPACT_RTF = NO
+RTF_HYPERLINKS = NO
+RTF_STYLESHEET_FILE =
+RTF_EXTENSIONS_FILE =
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# For now this is experimental and is disabled by default. The RTF output
-# is optimised for Word 97 and may not look too pretty with other readers
-# or editors.
-
-GENERATE_RTF = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using a WORD or other.
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS = NO
#---------------------------------------------------------------------------
# configuration options related to the man page output
#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION = .3
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed.
-
-MACRO_EXPANSION = YES
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed.
-
-PREDEFINED =
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED tag.
-
-EXPAND_ONLY_PREDEF = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tagfiles.
-
-TAGFILES =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS = NO
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT = YES
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH = YES
-
-# If the ENABLE_PREPROCESSING, INCLUDE_GRAPH, and HAVE_DOT tags are set to
-# YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other
-# documented files.
-
-INCLUDE_GRAPH = YES
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the search engine
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE = NO
-
-# The CGI_NAME tag should be the name of the CGI script that
-# starts the search engine (doxysearch) with the correct parameters.
-# A script with this name will be generated by doxygen.
-
-CGI_NAME = search.cgi
-
-# The CGI_URL tag should be the absolute URL to the directory where the
-# cgi binaries are located. See the documentation of your http daemon for
-# details.
-
-CGI_URL =
-
-# The DOC_URL tag should be the absolute URL to the directory where the
-# documentation is located. If left blank the absolute path to the
-# documentation, with file:// prepended to it, will be used.
-
-DOC_URL =
-
-# The DOC_ABSPATH tag should be the absolute path to the directory where the
-# documentation is located. If left blank the directory on the local machine
-# will be used.
-
-DOC_ABSPATH =
-
-# The BIN_ABSPATH tag must point to the directory where the doxysearch binary
-# is installed.
-
-BIN_ABSPATH = /usr/local/bin/
-
-# The EXT_DOC_PATHS tag can be used to specify one or more paths to
-# documentation generated for other projects. This allows doxysearch to search
-# the documentation for these projects as well.
-
-EXT_DOC_PATHS =
+GENERATE_MAN = NO
+MAN_OUTPUT = man
+MAN_EXTENSION = .3
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+GENERATE_XML = NO
+XML_OUTPUT = xml
+XML_SCHEMA =
+XML_DTD =
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+GENERATE_PERLMOD = NO
+PERLMOD_LATEX = NO
+PERLMOD_PRETTY = YES
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+ENABLE_PREPROCESSING = YES
+MACRO_EXPANSION = YES
+EXPAND_ONLY_PREDEF = NO
+SEARCH_INCLUDES = YES
+INCLUDE_PATH =
+INCLUDE_FILE_PATTERNS =
+PREDEFINED =
+EXPAND_AS_DEFINED =
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+TAGFILES =
+GENERATE_TAGFILE =
+ALLEXTERNALS = NO
+EXTERNAL_GROUPS = YES
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+CLASS_DIAGRAMS = NO
+MSCGEN_PATH =
+HIDE_UNDOC_RELATIONS = YES
+HAVE_DOT = YES
+DOT_NUM_THREADS = 0
+DOT_FONTNAME = FreeSans.ttf
+DOT_FONTSIZE = 10
+DOT_FONTPATH =
+CLASS_GRAPH = YES
+COLLABORATION_GRAPH = YES
+GROUP_GRAPHS = YES
+UML_LOOK = NO
+TEMPLATE_RELATIONS = NO
+INCLUDE_GRAPH = YES
+INCLUDED_BY_GRAPH = YES
+CALL_GRAPH = NO
+CALLER_GRAPH = NO
+GRAPHICAL_HIERARCHY = YES
+DIRECTORY_GRAPH = YES
+DOT_IMAGE_FORMAT = png
+DOT_PATH =
+DOTFILE_DIRS =
+DOT_GRAPH_MAX_NODES = 80
+MAX_DOT_GRAPH_DEPTH = 0
+DOT_TRANSPARENT = NO
+DOT_MULTI_TARGETS = NO
+GENERATE_LEGEND = YES
+DOT_CLEANUP = YES
Added: xalan/c/trunk/xdocs/html/apiDocs/asf_logo_wide.gif
URL: http://svn.apache.org/viewvc/xalan/c/trunk/xdocs/html/apiDocs/asf_logo_wide.gif?rev=1295927&view=auto
==============================================================================
Binary file - no diff available.
Propchange: xalan/c/trunk/xdocs/html/apiDocs/asf_logo_wide.gif
------------------------------------------------------------------------------
svn:mime-type = application/octet-stream
Modified: xalan/c/trunk/xdocs/html/apiDocs/footer.html
URL: http://svn.apache.org/viewvc/xalan/c/trunk/xdocs/html/apiDocs/footer.html?rev=1295927&r1=1295926&r2=1295927&view=diff
==============================================================================
--- xalan/c/trunk/xdocs/html/apiDocs/footer.html (original)
+++ xalan/c/trunk/xdocs/html/apiDocs/footer.html Thu Mar 1 21:57:10 2012
@@ -1,19 +1,22 @@
-<p align="center"><a href="diagramnotes.html">Interpreting class diagrams</a></p>
-<p><FONT color="#000000" face="arial,helvetica,sanserif" size="-1">
-<i><A href="http://www.stack.nl/~dimitri/doxygen/">Doxygen</A> and
-<A href="http://www.research.att.com/sw/tools/graphviz/">GraphViz</A> are used to generate this API documentation from the Xalan-C header files.</I></FONT></p>
+<p align="center"><a href="graph_legend.html">Interpreting class diagrams</a></p>
+<p><font color="#000000" face="arial,helvetica,sanserif" size="-1">
+<i><a href="http://www.doxygen.org/">Doxygen</a> and
+<a href="http://www.graphviz.org/">GraphViz</a> are
+used to generate this API documentation from the Xalan-C header files.</i></font></p>
-<TABLE border="0" cellpadding="0" cellspacing="0" width="820"><TR><TD bgcolor="#0086b2"><IMG height="1" src="../resources/dot.gif" width="1" alt="dot"></TD></TR></TABLE>
-<TABLE BORDER="0" CELLPADDING="0" CELLSPACING="0" WIDTH="80%">
- <TR>
- <TD WIDTH="80%" VALIGN="TOP">
- <P ALIGN="CENTER"><B>Xalan-C++ XSLT Processor Version 1.10</B><BR>
- Copyright © 1999-2012 The Apache Software Foundation. All Rights Reserved.</i></p>
- </TD>
- </TR>
- <TR>
- <TD WIDTH="100%">
- <P ALIGN="CENTER"><IMG SRC="ApacheLogo.jpg" WIDTH="387" HEIGHT="100" ALIGN="BOTTOM" BORDER="0" ALT="Apache Logo">
- </TD>
- </TR>
-</TABLE>
+<table border="0" cellpadding="0" cellspacing="0" width="80%">
+ <tr>
+ <td width="80%" valign="top">
+ <p align="center"><b>Xalan-C++ XSLT Processor Version 1.11</b><br/>
+ Copyright © 1999-2012 The Apache Software Foundation.<br/>
+ All Rights Reserved.</p>
+ </td>
+ </tr>
+ <tr>
+ <td width="100%">
+ <p align="center"><img src="asf_logo_wide.gif" width="268" height="25" align="bottom" border="0" alt="Apache Logo">
+ </td>
+ </tr>
+</table>
+</body>
+</html>
Added: xalan/c/trunk/xdocs/html/apiDocs/header-local.html
URL: http://svn.apache.org/viewvc/xalan/c/trunk/xdocs/html/apiDocs/header-local.html?rev=1295927&view=auto
==============================================================================
--- xalan/c/trunk/xdocs/html/apiDocs/header-local.html (added)
+++ xalan/c/trunk/xdocs/html/apiDocs/header-local.html Thu Mar 1 21:57:10 2012
@@ -0,0 +1,13 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
+<title>Xalan-C++ API : Main Page</title>
+<link href="tabs.css" rel="stylesheet" type="text/css"/>
+<link href="doxygen.css" rel="stylesheet" type="text/css"/>
+</head>
+<!-- The head section is copied from Doxygen 1.7.1 generated default output -->
+<body>
+<h2 align="center">Xalan-C++ API Documentation</h2>
+<h3 align="center"><a href="../index.html">The Xalan C++ XSLT Processor Version 1.11</a></h3>
+<hr/>
Modified: xalan/c/trunk/xdocs/html/apiDocs/header.html
URL: http://svn.apache.org/viewvc/xalan/c/trunk/xdocs/html/apiDocs/header.html?rev=1295927&r1=1295926&r2=1295927&view=diff
==============================================================================
--- xalan/c/trunk/xdocs/html/apiDocs/header.html (original)
+++ xalan/c/trunk/xdocs/html/apiDocs/header.html Thu Mar 1 21:57:10 2012
@@ -1,5 +1,13 @@
-<HTML><HEAD><TITLE>Xalan-C++ API Documentation</TITLE></HEAD>
-<BODY>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
+<title>Xalan-C++ API : Main Page</title>
+<link href="tabs.css" rel="stylesheet" type="text/css"/>
+<link href="doxygen.css" rel="stylesheet" type="text/css"/>
+</head>
+<!-- The head section is copied from Doxygen 1.7.1 generated default output -->
+<body>
<h2 align="center">Xalan-C++ API Documentation</h2>
-<h3 align="center">The Xalan C++ XSLT Processor Version 1.10</h3>
-</BODY>
\ No newline at end of file
+<h3 align="center"><a href="http://xml.apache.org/xalan-c">The Xalan C++ XSLT Processor Version 1.11</a></h3>
+<hr/>