Re: PPC verify using PEM_read_bio_PUBKEY crash

Unfortunately, I am not familiar with PPC architecture and can't give
you any additional advice here. As I said, I suspect that the runtime
version of libcrypto is different from the version used during
compilation. Check what headers have been included to make sure there
is a match.

Aleksey

On 4/1/15 5:51 AM, Gil Beniamini wrote:
> Hi Aleksey,
> I was compering “ldd” output of libxmlsec1.so & libxmlsec1-openssl.so
> between the compile&link-tree and run-time tree and see no differences?!
> But if I look on LDD output of libxmlsec1, does the fact that additional
> libs like “libgssapi_krb” & “libkrb5” & “libcom_err” & “libk5crypto” &
> “libresolv” & (most strange is “libkrb5support” which appear after
> ld.so.1), does it make sense?
> Or sould I “ldd” all the libraries showed in “ldd” output?
>  
> ON X86:
> military@military-S3420GP:~/Mvsat_License$ ldd
> /usr/lib32/libxmlsec1-openssl.so
>                 linux-gate.so.1 =>  (0xb775d000)
>                 libssl.so.0.9.8 => /lib/i386-linux-gnu/libssl.so.0.9.8
> (0xb76c4000)
>                 libcrypto.so.0.9.8 =>
> /lib/i386-linux-gnu/libcrypto.so.0.9.8 (0xb754b000)
>                 libxml2.so.2 => /usr/lib/i386-linux-gnu/libxml2.so.2
> (0xb73fc000)
>                 libxmlsec1.so.1 => /usr/lib32/libxmlsec1.so.1 (0xb739a000)
>                 libc.so.6 => /lib/i386-linux-gnu/libc.so.6 (0xb71f0000)
>                 libdl.so.2 => /lib/i386-linux-gnu/libdl.so.2 (0xb71eb000)
>                 libz.so.1 => /lib/i386-linux-gnu/libz.so.1 (0xb71d5000)
>                 libm.so.6 => /lib/i386-linux-gnu/libm.so.6 (0xb71a8000)
>                 libltdl.so.7 => /usr/lib/i386-linux-gnu/libltdl.so.7
> (0xb719e000)
>                 /lib/ld-linux.so.2 (0xb775e000)ON X86:
>  
> ON PPC:
> gil@ubuntu10gil:~/xmlsec1-1.2.20/examples$ ${CROSS_COMPILE}ldd
> ../ppclibs/libxmlsec1-openssl.so
>         libssl.so.6 => /media/disk2/opt/eldk/4.2/ppc_85xxDP/lib/libssl.so.6
>         libcrypto.so.6 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/lib/libcrypto.so.6
>         libxml2.so.2 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/usr/lib/libxml2.so.2
>         libxmlsec1.so.1 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/usr/lib/libxmlsec1.so.1
>         libc.so.6 => /media/disk2/opt/eldk/4.2/ppc_85xxDP/lib/libc.so.6
>         libgssapi_krb5.so.2 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/usr/lib/libgssapi_krb5.so.2
>         libkrb5.so.3 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/usr/lib/libkrb5.so.3
>         libcom_err.so.2 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/lib/libcom_err.so.2
>         libk5crypto.so.3 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/usr/lib/libk5crypto.so.3
>         libresolv.so.2 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/lib/libresolv.so.2
>         libdl.so.2 => /media/disk2/opt/eldk/4.2/ppc_85xxDP/lib/libdl.so.2
>         libz.so.1 => /media/disk2/opt/eldk/4.2/ppc_85xxDP/lib/libz.so.1
>         libm.so.6 => /media/disk2/opt/eldk/4.2/ppc_85xxDP/lib/libm.so.6
>         libltdl.so.3 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/usr/lib/libltdl.so.3
>         ld.so.1 => /media/disk2/opt/eldk/4.2/ppc_85xxDP/lib/ld.so.1
>         libkrb5support.so.0 =>
> /media/disk2/opt/eldk/4.2/ppc_85xxDP/usr/lib/libkrb5support.so.0
>  
>  
> Gil Beniamini
> Gilat Satellite Networks – Defense R&D
> [email protected]
> Phone: (972)-3-9252427 Fax:(972)-3-9293240
>  
> -----Original Message-----
> From: Aleksey Sanin [mailto:[email protected]]
> Sent: Monday, March 30, 2015 6:06 PM
> To: Gil Beniamini; [email protected]
> Subject: Re: PPC verify using PEM_read_bio_PUBKEY crash
>  
> It looks like a a problem with compiling/linking against different
> versions of openssl. Run ldd to make sure you are using the right libraries.
>  
> Aleksey
>  
> On 3/30/15 6:47 AM, Gil Beniamini wrote:
>> Hi Aleksey,
>> 
>> Excuse me  for interruption, but I wonder if you can assist me.
>> 
>>  
>> 
>> I downloaded xmlsec1-1.2.20 and compiled it both for 386 and for 
>> ppc_85xxDP linux.
>> 
>>  
>> 
>> In 386 everything work OK (especially the examples
>> sign1/sign2/verify1/verify2 as described in README)
>> 
>>  
>> 
>> But in PPC verify1/verify2 when using as expected with public-key (I.e
>> “rsapub.pem”) the application crash! (but works of the key used is the
>> private-key(“rsakey.pem”),)
>> 
>> It fail with => “Trace/breakpoint trap” == signal-5 == SIGTRAP inside 
>> libcrypto.so trying to execute PEM_read_bio_PUBKEY being called from 
>> src/openssl/app.c line 259.
>> 
>> Any idea?!
>> 
>>  
>> 
>> Many thaks in advance, for any tip,
>> 
>> */Gil Beniamini/**//*
>> 
>> Gilat Satellite Networks – Defense R&D
>  
> 
> /IMPORTANT - This email and any attachments is intended for the above
> named addressee(s), and may contain information which is confidential or
> privileged. If you are not the intended recipient, please inform the
> sender immediately and delete this email: you should not copy or use
> this e-mail for any purpose nor disclose its contents to any person. /
> 
_______________________________________________
xmlsec mailing list
[email protected]
http://www.aleksey.com/mailman/listinfo/xmlsec