Re: OpenVPN per NetworkManager funktioniert nicht

Am 08.02.2023 16:54, schrieb Christian Perle:

Hallo Christian

> Im verbundenen Zustand waeren die Ausgaben folgender Befehle
> interessant:
> 
> $ ip addr show
> 
> $ ip rule show
> 
> $ ip route show
> 
> $ ip route get 8.8.8.8

Hier das ganze:

lucabert@NB-3W60C0:~$ ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
group default qlen 1000
     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
     inet 127.0.0.1/8 scope host lo
        valid_lft forever preferred_lft forever
     inet6 ::1/128 scope host
        valid_lft forever preferred_lft forever
2: enp11s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP 
group default qlen 1000
     link/ether 6c:24:08:b0:48:61 brd ff:ff:ff:ff:ff:ff
     inet 172.29.24.183/23 brd 172.29.25.255 scope global dynamic 
noprefixroute enp11s0
        valid_lft 658542sec preferred_lft 658542sec
     inet6 fe80::530a:1606:b5ef:3d7b/64 scope link noprefixroute
        valid_lft forever preferred_lft forever
3: enx047bcb5f3c92: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc 
pfifo_fast state DOWN group default qlen 1000
     link/ether 04:7b:cb:5f:3c:92 brd ff:ff:ff:ff:ff:ff
4: wlp9s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue 
state DOWN group default qlen 1000
     link/ether be:66:9e:90:96:cf brd ff:ff:ff:ff:ff:ff permaddr 
a0:80:69:a3:d7:16
6: lucabert: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc 
pfifo_fast state UNKNOWN group default qlen 500
     link/none
     inet 10.200.0.5/24 brd 10.200.0.255 scope global noprefixroute 
lucabert
        valid_lft forever preferred_lft forever
     inet6 fe80::3446:32d5:f7db:b453/64 scope link stable-privacy
        valid_lft forever preferred_lft forever
lucabert@NB-3W60C0:~$ ip rule show
0:      from all lookup local
32766:  from all lookup main
32767:  from all lookup default
lucabert@NB-3W60C0:~$ ip route show
default via 172.29.24.1 dev enp11s0 proto dhcp metric 100
10.200.0.0/24 dev lucabert proto kernel scope link src 10.200.0.5 metric 
50
46.251.251.211 via 10.200.0.1 dev lucabert proto static metric 50
87.191.224.158 via 10.200.0.1 dev lucabert proto static metric 50
91.216.245.10 via 10.200.0.1 dev lucabert proto static metric 50
93.241.91.232 via 172.29.24.1 dev enp11s0 proto static metric 100
169.254.0.0/16 dev enp11s0 scope link metric 1000
172.29.24.0/23 dev enp11s0 proto kernel scope link src 172.29.24.183 
metric 100
172.29.24.1 dev enp11s0 proto static scope link metric 100
185.242.112.224 via 10.200.0.1 dev lucabert proto static metric 50
185.242.112.225 via 10.200.0.1 dev lucabert proto static metric 50
192.168.10.0/24 via 10.200.0.1 dev lucabert proto static metric 50
192.168.40.0/24 via 10.200.0.1 dev lucabert proto static metric 50
lucabert@NB-3W60C0:~$ ip route get 8.8.8.8
8.8.8.8 via 172.29.24.1 dev enp11s0 src 172.29.24.183 uid 1000
     cache
lucabert@NB-3W60C0:~$ ip route get 192.168.10.3
192.168.10.3 via 10.200.0.1 dev lucabert src 10.200.0.5 uid 1000
     cache

Hilft das?

Danke
Luca Bertoncello
([email protected])