Re: Hard to Remove PM 2.0 x 3.0 Battery Hold Down Screws

On 3/28/2024 12:10 AM, Boris wrote:

> 
> I was unable to get the screws out with the tools I have on hand, so I 
> went to a local computer repair shop in the area, "Nerdy Dave's".  Dave 
> had the proper tools, and removed the screws with ease.
> 
> All screws did have a blue sealant on them.
> 
> I was now able to try and boot the machine without the battery, using 
> only the charger, which was my goal.  Didn't boot up.
> 
> The HP battery has a sticker on it with "replace with HP spare 859356-
> 855".  HP.com has discontinued the battery, and authorized resellers only 
> sell compatible batteries at $129.  No thanks, not for a 'compatible' 
> battery.  I'm not a fan of eBay, but I found an OEM's new, unopened HP 
> battery on eBay for $34.  Wonder how old it is.  It should arrive in 
> about a week.  I'll report back then.
> 
> If the machine still won't boot up with a replacement battery, I'll get 
> the data off the SSD.
> 
> Thanks to all.

Batteries have to be fresh. Or they may not be a good/safe value.

   Paul