Re: Computer turns on and then just dies
VanguardLH <[email protected]> Sat, 7 Dec 2024 09:46:55 -0600
| Newsgroups | alt.comp.hardware,alt.comp.hardware.pc-homebuilt |
|---|---|
| Organization | Usenet Elder |
| Message-ID | <[email protected]> |
s|b <[email protected]> wrote: > VanguardLH wrote: > >> If you were to run Prime95 for a while, the CPU would go way up in >> temp. you'll probably run up closer to 80C at which point the CPU >> may throttle itself (gets slower) to protect itself. > > I ran Prime95 for an hour. Highest temperature (according to > CoreTemp) was 48°C. > >> Your mobo has an FM1 socket for the CPU. Don't know which AMD CPU is >> in your socket, but likely it has an operating temperature range up >> to 95C. > > Paul's got a better memory than you; I mentioned the CPU. ;-) I wasn't in that subthread, so nothing for me to recall from my memory. Way too mentions of "cpu" to bother hunting through all the articles in this discussion. > AMD A8-3870 APU with Radeon(tm) HD Graphics https://forums.tomshardware.com/faq/an-understanding-of-temperature-on-amd-cpus-and-apus.1795730/ Apparently you can read the thermal margin which is the difference between the current CPU temperature and the maximum operating temperature. https://web.archive.org/web/20140713034657/https://www.cpu-world.com/CPUs/K10/AMD-A8-Series%20A8-3870%20AD3870WNZ43GX.html Maximum temperature: 72.7C With a temp monitor with threshold alerts and a history log, I'd set the alert to 60C. Then, if alerted, check the log to see how often you came close or exceeded that temperature. 60C still has wiggle room.