[DOC-CVS] [doc-en] master: Ev: Remove space before fullstop, comma and brace (#4596)
[email protected] (Jakub Vrána via GitHub)
| Newsgroups | php.doc.cvs |
|---|---|
| Message-ID | <[email protected]> |
Author: Jakub Vrána (vrana)
Committer: GitHub (web-flow)
Pusher: vrana
Date: 2025-04-15T13:12:47+02:00
Commit: https://github.com/php/doc-en/commit/23ea6be076881a34e1d454e9680968ece085f7f6
Raw diff: https://github.com/php/doc-en/commit/23ea6be076881a34e1d454e9680968ece085f7f6.diff
Ev: Remove space before fullstop, comma and brace (#4596)
Changed paths:
M reference/ev/ev.xml
M reference/ev/ev/backend.xml
M reference/ev/ev/depth.xml
M reference/ev/ev/feedsignal.xml
M reference/ev/ev/now.xml
M reference/ev/ev/nowupdate.xml
M reference/ev/ev/recommendedbackends.xml
M reference/ev/ev/resume.xml
M reference/ev/ev/run.xml
M reference/ev/ev/stop.xml
M reference/ev/ev/suspend.xml
M reference/ev/ev/verify.xml
M reference/ev/evcheck.xml
M reference/ev/evcheck/construct.xml
M reference/ev/evcheck/createstopped.xml
M reference/ev/evchild.xml
M reference/ev/evchild/construct.xml
M reference/ev/evchild/createstopped.xml
M reference/ev/evembed/construct.xml
M reference/ev/evembed/createstopped.xml
M reference/ev/evfork/construct.xml
M reference/ev/evfork/createstopped.xml
M reference/ev/evidle.xml
M reference/ev/evidle/construct.xml
M reference/ev/evidle/createstopped.xml
M reference/ev/evio/construct.xml
M reference/ev/evio/createstopped.xml
M reference/ev/evloop.xml
M reference/ev/evloop/backend.xml
M reference/ev/evloop/embed.xml
M reference/ev/evloop/nowupdate.xml
M reference/ev/evloop/run.xml
M reference/ev/evloop/stop.xml
M reference/ev/evloop/verify.xml
M reference/ev/evperiodic.xml
M reference/ev/evperiodic/at.xml
M reference/ev/evperiodic/construct.xml
M reference/ev/evperiodic/createstopped.xml
M reference/ev/evperiodic/set.xml
M reference/ev/evprepare/construct.xml
M reference/ev/evprepare/createstopped.xml
M reference/ev/evsignal/construct.xml
M reference/ev/evsignal/createstopped.xml
M reference/ev/evstat.xml
M reference/ev/evstat/construct.xml
M reference/ev/evstat/createstopped.xml
M reference/ev/evstat/prev.xml
M reference/ev/evstat/stat.xml
M reference/ev/evtimer.xml
M reference/ev/evtimer/construct.xml
M reference/ev/evtimer/createstopped.xml
M reference/ev/evtimer/set.xml
M reference/ev/evwatcher.xml
M reference/ev/evwatcher/clear.xml
M reference/ev/evwatcher/feed.xml
M reference/ev/evwatcher/invoke.xml
M reference/ev/evwatcher/setcallback.xml
M reference/ev/periodic-modes.xml
M reference/ev/setup.xml
M reference/ev/watcher-callbacks.xml
M reference/ev/watchers.xml
M reference/event/book.xml
M reference/event/event.callbacks.xml
M reference/event/event.constructing.signal.events.xml
M reference/event/event.flags.xml
M reference/event/event.persistence.xml
M reference/event/event.xml
M reference/event/event/construct.xml
M reference/event/event/free.xml
M reference/event/event/pending.xml
M reference/event/event/set.xml
M reference/event/event/settimer.xml
M reference/event/event/signal.xml
M reference/event/event/timer.xml
M reference/event/eventbase.xml
M reference/event/eventbase/free.xml
M reference/event/eventbase/getfeatures.xml
M reference/event/eventbase/gotexit.xml
M reference/event/eventbase/gotstop.xml
M reference/event/eventbase/loop.xml
M reference/event/eventbuffer.xml
M reference/event/eventbuffer/addbuffer.xml
M reference/event/eventbuffer/copyout.xml
M reference/event/eventbuffer/drain.xml
M reference/event/eventbuffer/prependbuffer.xml
M reference/event/eventbuffer/readline.xml
M reference/event/eventbuffer/search.xml
M reference/event/eventbuffer/searcheol.xml
M reference/event/eventbuffer/unlock.xml
M reference/event/eventbufferevent.about.callbacks.xml
M reference/event/eventbufferevent.xml
M reference/event/eventbufferevent/connecthost.xml
M reference/event/eventbufferevent/construct.xml
M reference/event/eventbufferevent/createpair.xml
M reference/event/eventbufferevent/disable.xml
M reference/event/eventbufferevent/enable.xml
M reference/event/eventbufferevent/free.xml
M reference/event/eventbufferevent/getdnserrorstring.xml
M reference/event/eventbufferevent/readbuffer.xml
M reference/event/eventbufferevent/setcallbacks.xml
M reference/event/eventbufferevent/setwatermark.xml
M reference/event/eventbufferevent/sslfilter.xml
M reference/event/eventbufferevent/sslsocket.xml
M reference/event/eventconfig.xml
M reference/event/eventconfig/avoidmethod.xml
M reference/event/eventconfig/setmaxdispatchinterval.xml
M reference/event/eventdnsbase/loadhosts.xml
M reference/event/eventdnsbase/parseresolvconf.xml
M reference/event/eventdnsbase/setoption.xml
M reference/event/eventhttp/accept.xml
M reference/event/eventhttp/setallowedmethods.xml
M reference/event/eventhttp/setcallback.xml
M reference/event/eventhttp/setdefaultcallback.xml
M reference/event/eventhttpconnection/makerequest.xml
M reference/event/eventhttprequest/addheader.xml
M reference/event/eventhttprequest/findheader.xml
M reference/event/eventhttprequest/getconnection.xml
M reference/event/eventhttprequest/sendreplystart.xml
M reference/event/eventlistener/construct.xml
M reference/event/eventsslcontext.xml
M reference/event/eventsslcontext/construct.xml
M reference/event/eventutil.xml
M reference/event/eventutil/setsocketoption.xml
M reference/event/setup.xml
M reference/parle/pattern.matching.xml
Diff:
diff --git a/reference/ev/ev.xml b/reference/ev/ev.xml
index 92f5594bb18c..d23460bf7169 100644
--- a/reference/ev/ev.xml
+++ b/reference/ev/ev.xml
@@ -268,8 +268,8 @@
If this flag used(or the program runs setuid or setgid),
<literal>libev</literal>
won't look at the environment variable
- <varname>LIBEV_FLAGS</varname>
- . Otherwise(by default),
+ <varname>LIBEV_FLAGS</varname>.
+ Otherwise(by default),
<varname>LIBEV_FLAGS</varname>
will override the flags completely if it is found. Useful for
performance tests and searching for bugs.
@@ -330,9 +330,8 @@
<link
xlink:href="&url.ev.signal;">ev_signal</link>
(and
- <link
- xlink:href="&url.ev.child;">ev_child</link>
- ) watchers. This API delivers signals synchronously, which makes it
+ <link xlink:href="&url.ev.child;">ev_child</link>)
+ watchers. This API delivers signals synchronously, which makes it
both faster and might make it possible to get the queued signal data.
It can also simplify signal handling with threads, as long as signals
are properly blocked in threads.
@@ -363,8 +362,8 @@
<!--}}}-->
<para xml:id="ev.constants.run-flags">
Flags passed to
- <methodname>Ev::run</methodname>
- , or
+ <methodname>Ev::run</methodname>,
+ or
<methodname>EvLoop::run</methodname>
<!--{{{-->
<variablelist>
@@ -403,8 +402,8 @@
<!--}}}-->
<para xml:id="ev.constants.break-flags">
Flags passed to
- <methodname>Ev::stop</methodname>
- , or
+ <methodname>Ev::stop</methodname>,
+ or
<methodname>EvLoop::stop</methodname>
<!--{{{-->
<variablelist>
@@ -427,8 +426,8 @@
Makes the innermost
<methodname>Ev::run</methodname>
(or
- <methodname>EvLoop::run</methodname>
- ) call return.
+ <methodname>EvLoop::run</methodname>)
+ call return.
</para>
</listitem>
</varlistentry>
@@ -441,8 +440,8 @@
Makes all nested
<methodname>Ev::run</methodname>
(or
- <methodname>EvLoop::run</methodname>
- ) calls return.
+ <methodname>EvLoop::run</methodname>)
+ calls return.
</para>
</listitem>
</varlistentry>
@@ -742,10 +741,10 @@
explicitly. Bitwise operators should be applied here(e.g.
<constant>Ev::BACKEND_ALL</constant>
& ~
- <constant>Ev::BACKEND_KQUEUE</constant>
- ) Use
- <methodname>Ev::recommendedBackends</methodname>
- , or don't specify any backends at all.
+ <constant>Ev::BACKEND_KQUEUE</constant>)
+ Use
+ <methodname>Ev::recommendedBackends</methodname>,
+ or don't specify any backends at all.
</para>
</listitem>
</varlistentry>
@@ -786,14 +785,13 @@
in
<classname>Ev</classname>
class(e.g.
- <methodname>Ev::iteration</methodname>
- ,
+ <methodname>Ev::iteration</methodname>,
<methodname>Ev::depth</methodname>
etc.) For
<emphasis>custom loops</emphasis>
(created with
- <methodname>EvLoop::__construct</methodname>
- ) these values may be accessed via corresponding properties and methods
+ <methodname>EvLoop::__construct</methodname>)
+ these values may be accessed via corresponding properties and methods
of the
<classname>EvLoop</classname>
class.
diff --git a/reference/ev/ev/backend.xml b/reference/ev/ev/backend.xml
index f3e6106a42f7..8440344a7a27 100644
--- a/reference/ev/ev/backend.xml
+++ b/reference/ev/ev/backend.xml
@@ -17,8 +17,8 @@
</methodsynopsis>
<para>
Returns an integer describing the backend used by
- <emphasis>libev</emphasis>
- . See
+ <emphasis>libev</emphasis>.
+ See
<link linkend="ev.constants.watcher-backends">Backend flags</link>
</para>
</refsect1>
@@ -30,8 +30,7 @@
&reftitle.returnvalues;
<para>
Returns an integer(bit mask) describing the backend used by
- <emphasis>libev</emphasis>
- .
+ <emphasis>libev</emphasis>.
</para>
</refsect1>
<refsect1 role="seealso">
diff --git a/reference/ev/ev/depth.xml b/reference/ev/ev/depth.xml
index b1ca256f5991..5eec736dc230 100644
--- a/reference/ev/ev/depth.xml
+++ b/reference/ev/ev/depth.xml
@@ -21,12 +21,12 @@
was entered minus the number of times
<methodname>Ev::run</methodname>
was exited normally, in other words, the recursion depth. Outside
- <methodname>Ev::run</methodname>
- , this number is
- <literal>0</literal>
- . In a callback, this number is
- <literal>1</literal>
- , unless
+ <methodname>Ev::run</methodname>,
+ this number is
+ <literal>0</literal>.
+ In a callback, this number is
+ <literal>1</literal>,
+ unless
<methodname>Ev::run</methodname>
was invoked recursively (or from another thread), in which case it is
higher.
diff --git a/reference/ev/ev/feedsignal.xml b/reference/ev/ev/feedsignal.xml
index 22fc17b4afce..e12c7e7b4b45 100644
--- a/reference/ev/ev/feedsignal.xml
+++ b/reference/ev/ev/feedsignal.xml
@@ -25,8 +25,8 @@
</para>
<para>
Unlike
- <methodname>Ev::feedSignalEvent</methodname>
- , this works regardless of which loop has registered the signal.
+ <methodname>Ev::feedSignalEvent</methodname>,
+ this works regardless of which loop has registered the signal.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/ev/ev/now.xml b/reference/ev/ev/now.xml
index 3a3baf5d561b..84987dde12c1 100644
--- a/reference/ev/ev/now.xml
+++ b/reference/ev/ev/now.xml
@@ -21,10 +21,9 @@
started. This is the time that timers(
<classname>EvTimer</classname>
and
- <classname>EvPeriodic</classname>
- ) are based on, and referring to it is usually faster then calling
- <methodname>Ev::time</methodname>
- .
+ <classname>EvPeriodic</classname>)
+ are based on, and referring to it is usually faster then calling
+ <methodname>Ev::time</methodname>.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/ev/ev/nowupdate.xml b/reference/ev/ev/nowupdate.xml
index 93790b37a784..6f8c432d2f68 100644
--- a/reference/ev/ev/nowupdate.xml
+++ b/reference/ev/ev/nowupdate.xml
@@ -22,8 +22,7 @@
<methodname>Ev::now</methodname>
in the progress. This is a costly operation and is usually done
automatically within
- <methodname>Ev::run</methodname>
- .
+ <methodname>Ev::run</methodname>.
</para>
<para>
This method is rarely useful, but when some event callback runs for a very
diff --git a/reference/ev/ev/recommendedbackends.xml b/reference/ev/ev/recommendedbackends.xml
index d34e682a2cf1..ecea5d54eac8 100644
--- a/reference/ev/ev/recommendedbackends.xml
+++ b/reference/ev/ev/recommendedbackends.xml
@@ -21,8 +21,8 @@
<literal>libev</literal>
and also recommended for this platform, meaning it will work for most file
descriptor types. This set is often smaller than the one returned by
- <function>ev_supported_backends</function>
- , as for example
+ <function>ev_supported_backends</function>,
+ as for example
<literal>kqueue</literal>
is broken on most
<literal>BSD</literal>
diff --git a/reference/ev/ev/resume.xml b/reference/ev/ev/resume.xml
index 6db2621a586d..aa817541f062 100644
--- a/reference/ev/ev/resume.xml
+++ b/reference/ev/ev/resume.xml
@@ -25,8 +25,8 @@
All timer watchers will be delayed by the time spend between
<emphasis>suspend</emphasis>
and
- <emphasis>resume</emphasis>
- , and all
+ <emphasis>resume</emphasis>,
+ and all
<emphasis>periodic</emphasis>
watchers will be rescheduled(that is, they will lose any events that would
have occurred while suspended).
@@ -35,12 +35,11 @@
After calling
<methodname>Ev::suspend</methodname>
it is not allowed to call any function on the given loop other than
- <methodname>Ev::resume</methodname>
- . Also it is not allowed to call
+ <methodname>Ev::resume</methodname>.
+ Also it is not allowed to call
<methodname>Ev::resume</methodname>
without a previous call to
- <methodname>Ev::suspend</methodname>
- .
+ <methodname>Ev::suspend</methodname>.
</para>
<para>
Calling
diff --git a/reference/ev/ev/run.xml b/reference/ev/ev/run.xml
index a747cc57984e..c96f49b6a5f4 100644
--- a/reference/ev/ev/run.xml
+++ b/reference/ev/ev/run.xml
@@ -21,9 +21,8 @@
</methodsynopsis>
<para>
Begin checking for events and calling callbacks
- <emphasis>for the default
- loop</emphasis>
- . Returns when a callback calls
+ <emphasis>for the default loop</emphasis>.
+ Returns when a callback calls
<methodname>Ev::stop</methodname>
method, or the flags are nonzero(in which case the return value is true) or
when there are no active watchers which reference the loop(
@@ -31,8 +30,7 @@
is &true;), in which case the return value will be &false;. The return
value can generally be interpreted as
<emphasis>if &true;, there is more work left to
- do</emphasis>
- .
+ do</emphasis>.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -86,8 +84,7 @@
<para>
See
<link linkend="ev.constants.run-flags">the run flag
- constants</link>
- .
+ constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/ev/stop.xml b/reference/ev/ev/stop.xml
index 17109d597907..890df8fce462 100644
--- a/reference/ev/ev/stop.xml
+++ b/reference/ev/ev/stop.xml
@@ -34,8 +34,7 @@
One of
<emphasis>Ev::BREAK_*</emphasis>
<link
- linkend="ev.constants.break-flags">constants</link>
- .
+ linkend="ev.constants.break-flags">constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/ev/suspend.xml b/reference/ev/ev/suspend.xml
index ebaedad0b135..6cf41a01d0cb 100644
--- a/reference/ev/ev/suspend.xml
+++ b/reference/ev/ev/suspend.xml
@@ -25,8 +25,8 @@
All timer watchers will be delayed by the time spend between
<emphasis>suspend</emphasis>
and
- <emphasis>resume</emphasis>
- , and all
+ <emphasis>resume</emphasis>,
+ and all
<emphasis>periodic</emphasis>
watchers will be rescheduled(that is, they will lose any events that would
have occurred while suspended).
@@ -35,12 +35,11 @@
After calling
<methodname>Ev::suspend</methodname>
it is not allowed to call any function on the given loop other than
- <methodname>Ev::resume</methodname>
- . Also it is not allowed to call
+ <methodname>Ev::resume</methodname>.
+ Also it is not allowed to call
<methodname>Ev::resume</methodname>
without a previous call to
- <methodname>Ev::suspend</methodname>
- .
+ <methodname>Ev::suspend</methodname>.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/ev/ev/verify.xml b/reference/ev/ev/verify.xml
index 88377a860b6a..19c8eca4d4b5 100644
--- a/reference/ev/ev/verify.xml
+++ b/reference/ev/ev/verify.xml
@@ -17,8 +17,8 @@
</methodsynopsis>
<para>
Performs internal consistency checks(for debugging
- <emphasis>libev</emphasis>
- ) and abort the program if any data structures were found to be corrupted.
+ <emphasis>libev</emphasis>)
+ and abort the program if any data structures were found to be corrupted.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/ev/evcheck.xml b/reference/ev/evcheck.xml
index b85482748ef2..9c931f8534e1 100644
--- a/reference/ev/evcheck.xml
+++ b/reference/ev/evcheck.xml
@@ -30,8 +30,8 @@
in those watchers, i.e. the sequence will always be:
<classname>EvPrepare</classname>
-> blocking ->
- <classname>EvCheck</classname>
- , so having a watcher of each kind they will always be called in pairs
+ <classname>EvCheck</classname>,
+ so having a watcher of each kind they will always be called in pairs
bracketing the blocking call.
</para>
<para>
@@ -46,8 +46,8 @@
It is recommended to give
<classname>EvCheck</classname>
watchers highest(
- <constant>Ev::MAXPRI</constant>
- ) priority, to ensure that they are being run before any other watchers
+ <constant>Ev::MAXPRI</constant>)
+ priority, to ensure that they are being run before any other watchers
after the poll (this doesn’t matter for
<classname>EvPrepare</classname>
watchers).
diff --git a/reference/ev/evcheck/construct.xml b/reference/ev/evcheck/construct.xml
index 4230b46e5f6c..c76bf7917fd3 100644
--- a/reference/ev/evcheck/construct.xml
+++ b/reference/ev/evcheck/construct.xml
@@ -39,8 +39,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evcheck/createstopped.xml b/reference/ev/evcheck/createstopped.xml
index 32cb82538f39..a627dbc9b398 100644
--- a/reference/ev/evcheck/createstopped.xml
+++ b/reference/ev/evcheck/createstopped.xml
@@ -40,8 +40,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evchild.xml b/reference/ev/evchild.xml
index 43e9673aab22..7460ca55a755 100644
--- a/reference/ev/evchild.xml
+++ b/reference/ev/evchild.xml
@@ -81,10 +81,10 @@
</term>
<listitem>
<para>
- <emphasis>Readonly</emphasis>
- . The process ID this watcher watches out for, or
- <literal>0</literal>
- , meaning any process ID.
+ <emphasis>Readonly</emphasis>.
+ The process ID this watcher watches out for, or
+ <literal>0</literal>,
+ meaning any process ID.
</para>
</listitem>
</varlistentry>
@@ -105,10 +105,9 @@
</term>
<listitem>
<para>
- <emphasis>Readonly</emphasis>
- . The process exit status caused by
- <varname>rpid</varname>
- .
+ <emphasis>Readonly</emphasis>.
+ The process exit status caused by
+ <varname>rpid</varname>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evchild/construct.xml b/reference/ev/evchild/construct.xml
index 0efba35db718..80e0307dc896 100644
--- a/reference/ev/evchild/construct.xml
+++ b/reference/ev/evchild/construct.xml
@@ -48,14 +48,13 @@
if
<parameter>pid</parameter>
is
- <literal>0</literal>
- ) has been received(a status change happens when the process terminates or
+ <literal>0</literal>)
+ has been received(a status change happens when the process terminates or
is killed, or, when
<parameter>trace</parameter>
is &true;, additionally when it is stopped or continued). In other words,
when the process receives a
- <constant>SIGCHLD</constant>
- ,
+ <constant>SIGCHLD</constant>,
<emphasis>Ev</emphasis>
will fetch the outstanding exit/wait status for all changed/zombie children
and call the callback.
@@ -65,12 +64,11 @@
<classname>EvChild</classname>
has exited but before the event loop has started its next iteration. For
example, first one calls
- <literal>fork</literal>
- , then the new child process might exit, and only then an
+ <literal>fork</literal>,
+ then the new child process might exit, and only then an
<classname>EvChild</classname>
watcher is installed in the parent for the new
- <emphasis>PID</emphasis>
- .
+ <emphasis>PID</emphasis>.
</para>
<para>
You can access both exit/tracing status and
@@ -129,8 +127,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evchild/createstopped.xml b/reference/ev/evchild/createstopped.xml
index 3c87983e192b..9a47021117a4 100644
--- a/reference/ev/evchild/createstopped.xml
+++ b/reference/ev/evchild/createstopped.xml
@@ -36,8 +36,8 @@
</methodsynopsis>
<para>
The same as
- <methodname>EvChild::__construct</methodname>
- , but doesn't start the watcher automatically.
+ <methodname>EvChild::__construct</methodname>,
+ but doesn't start the watcher automatically.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -72,8 +72,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evembed/construct.xml b/reference/ev/evembed/construct.xml
index cf2bbadca3d2..5ffef816fb29 100644
--- a/reference/ev/evembed/construct.xml
+++ b/reference/ev/evembed/construct.xml
@@ -58,8 +58,8 @@
<listitem>
<para>
Instance of
- <classname>EvLoop</classname>
- . The loop to embed, this loop must be embeddable(see
+ <classname>EvLoop</classname>.
+ The loop to embed, this loop must be embeddable(see
<methodname>Ev::embeddableBackends</methodname>
).
</para>
@@ -72,8 +72,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evembed/createstopped.xml b/reference/ev/evembed/createstopped.xml
index 883504955c64..cf72f1c3e94a 100644
--- a/reference/ev/evembed/createstopped.xml
+++ b/reference/ev/evembed/createstopped.xml
@@ -32,8 +32,8 @@
</methodsynopsis>
<para>
The same as
- <methodname>EvEmbed::__construct</methodname>
- , but doesn't start the watcher automatically.
+ <methodname>EvEmbed::__construct</methodname>,
+ but doesn't start the watcher automatically.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -57,8 +57,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evfork/construct.xml b/reference/ev/evfork/construct.xml
index 89a730b57373..9766b6b60e43 100644
--- a/reference/ev/evfork/construct.xml
+++ b/reference/ev/evfork/construct.xml
@@ -41,8 +41,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evfork/createstopped.xml b/reference/ev/evfork/createstopped.xml
index 606138de99f0..a2503d5d3c61 100644
--- a/reference/ev/evfork/createstopped.xml
+++ b/reference/ev/evfork/createstopped.xml
@@ -28,8 +28,8 @@
</methodsynopsis>
<para>
The same as
- <methodname>EvFork::__construct</methodname>
- , but doesn't start the watcher automatically.
+ <methodname>EvFork::__construct</methodname>,
+ but doesn't start the watcher automatically.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -42,8 +42,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evidle.xml b/reference/ev/evidle.xml
index 6ccf9f552cf7..6c60afba872d 100644
--- a/reference/ev/evidle.xml
+++ b/reference/ev/evidle.xml
@@ -11,8 +11,7 @@
<classname>EvIdle</classname>
watchers trigger events when no other events of the same or higher
priority are pending (
- <classname>EvPrepare</classname>
- ,
+ <classname>EvPrepare</classname>,
<classname>EvCheck</classname>
and other
<classname>EvIdle</classname>
@@ -34,8 +33,8 @@
sometimes),
<classname>EvIdle</classname>
watchers are a good place to do
- <emphasis>"pseudo-background processing"</emphasis>
- , or delay processing stuff to after the event loop has handled all
+ <emphasis>"pseudo-background processing"</emphasis>,
+ or delay processing stuff to after the event loop has handled all
outstanding events.
</para>
<para>
diff --git a/reference/ev/evidle/construct.xml b/reference/ev/evidle/construct.xml
index c576bf00e9d9..d47a4d8e2ec0 100644
--- a/reference/ev/evidle/construct.xml
+++ b/reference/ev/evidle/construct.xml
@@ -37,8 +37,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evidle/createstopped.xml b/reference/ev/evidle/createstopped.xml
index 8fdf1b5aa36a..aed2b1c8c5cb 100644
--- a/reference/ev/evidle/createstopped.xml
+++ b/reference/ev/evidle/createstopped.xml
@@ -28,8 +28,8 @@
</methodsynopsis>
<para>
The same as
- <methodname>EvIdle::__construct</methodname>
- , but doesn't start the watcher automatically.
+ <methodname>EvIdle::__construct</methodname>,
+ but doesn't start the watcher automatically.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -42,8 +42,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evio/construct.xml b/reference/ev/evio/construct.xml
index f72c1b95e8d6..d32d7fb701f6 100644
--- a/reference/ev/evio/construct.xml
+++ b/reference/ev/evio/construct.xml
@@ -58,10 +58,9 @@
<para>
<constant>Ev::READ</constant>
and/or
- <constant>Ev::WRITE</constant>
- . See
- <link linkend="ev.constants.watcher-revents">the bit masks</link>
- .
+ <constant>Ev::WRITE</constant>.
+ See
+ <link linkend="ev.constants.watcher-revents">the bit masks</link>.
</para>
</listitem>
</varlistentry>
@@ -72,8 +71,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evio/createstopped.xml b/reference/ev/evio/createstopped.xml
index 3b66541ed47b..394080a3d542 100644
--- a/reference/ev/evio/createstopped.xml
+++ b/reference/ev/evio/createstopped.xml
@@ -40,8 +40,8 @@
</methodsynopsis>
<para>
The same as
- <methodname>EvIo::__construct</methodname>
- , but doesn't start the watcher automatically.
+ <methodname>EvIo::__construct</methodname>,
+ but doesn't start the watcher automatically.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -76,8 +76,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evloop.xml b/reference/ev/evloop.xml
index a17f1a669e58..2573ab9aefa1 100644
--- a/reference/ev/evloop.xml
+++ b/reference/ev/evloop.xml
@@ -10,10 +10,10 @@
<para>
Represents an event loop that is always distinct from the
<emphasis>default
- loop</emphasis>
- . Unlike the
- <emphasis>default loop</emphasis>
- , it cannot handle
+ loop</emphasis>.
+ Unlike the
+ <emphasis>default loop</emphasis>,
+ it cannot handle
<classname>EvChild</classname>
watchers.
</para>
@@ -26,8 +26,8 @@
The
<emphasis>default event loop</emphasis>
is initialized automatically by
- <emphasis>Ev</emphasis>
- . It is accessible via methods of the
+ <emphasis>Ev</emphasis>.
+ It is accessible via methods of the
<classname>Ev</classname>
class, or via
<methodname>EvLoop::defaultLoop</methodname>
@@ -110,8 +110,8 @@
</term>
<listitem>
<para>
- <emphasis>Readonly</emphasis>
- . The
+ <emphasis>Readonly</emphasis>.
+ The
<link linkend="ev.constants.watcher-backends">backend flags</link>
indicating the event backend in use.
</para>
@@ -123,8 +123,8 @@
</term>
<listitem>
<para>
- <emphasis>Readonly</emphasis>
- . &true; if it is the default event loop.
+ <emphasis>Readonly</emphasis>.
+ &true; if it is the default event loop.
</para>
</listitem>
</varlistentry>
@@ -167,8 +167,8 @@
increasing latency. Timeouts (both
<classname>EvPeriodic</classname>
and
- <classname>EvTimer</classname>
- ) will not be affected. Setting this to a non-zero value will introduce
+ <classname>EvTimer</classname>)
+ will not be affected. Setting this to a non-zero value will introduce
an additional
<literal>sleep()</literal>
call into most loop iterations. The sleep time ensures that
@@ -179,18 +179,17 @@
programs can usually benefit by setting the
<varname>io_interval</varname>
to a value near
- <literal>0.1</literal>
- , which is often enough for interactive servers(not for games). It
+ <literal>0.1</literal>,
+ which is often enough for interactive servers(not for games). It
usually doesn't make much sense to set it to a lower value than
- <literal>0.01</literal>
- , as this approaches the timing granularity of most systems.
+ <literal>0.01</literal>,
+ as this approaches the timing granularity of most systems.
</para>
<para>
See also
<link
xlink:href="http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod#FUNCTIONS_CONTROLLING_EVENT_LOOPS">FUNCTIONS
- CONTROLLING EVENT LOOPS</link>
- .
+ CONTROLLING EVENT LOOPS</link>.
</para>
</listitem>
</varlistentry>
@@ -209,12 +208,11 @@
<classname>EvIo</classname>
watchers will not be affected. Setting this to a non-null value will
not introduce any overhead in
- <emphasis>libev</emphasis>
- . See also
+ <emphasis>libev</emphasis>.
+ See also
<link
xlink:href="http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod#FUNCTIONS_CONTROLLING_EVENT_LOOPS">FUNCTIONS
- CONTROLLING EVENT LOOPS</link>
- .
+ CONTROLLING EVENT LOOPS</link>.
</para>
</listitem>
</varlistentry>
@@ -225,8 +223,7 @@
<listitem>
<para>
The recursion depth. See
- <methodname>Ev::depth</methodname>
- .
+ <methodname>Ev::depth</methodname>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evloop/backend.xml b/reference/ev/evloop/backend.xml
index d94898404bda..2d66750ce9e3 100644
--- a/reference/ev/evloop/backend.xml
+++ b/reference/ev/evloop/backend.xml
@@ -15,8 +15,8 @@
</methodsynopsis>
<para>
The same as
- <methodname>Ev::backend</methodname>
- , but for the loop instance.
+ <methodname>Ev::backend</methodname>,
+ but for the loop instance.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -27,8 +27,7 @@
&reftitle.returnvalues;
<para>
Returns an integer describing the backend used by libev. See
- <methodname>Ev::backend</methodname>
- .
+ <methodname>Ev::backend</methodname>.
</para>
</refsect1>
<refsect1 role="seealso">
diff --git a/reference/ev/evloop/embed.xml b/reference/ev/evloop/embed.xml
index 8d4bd076553b..77e8d1f108ba 100644
--- a/reference/ev/evloop/embed.xml
+++ b/reference/ev/evloop/embed.xml
@@ -42,8 +42,7 @@
&reftitle.parameters;
<para>
All parameters have the same meaning as for
- <methodname>EvEmbed::__construct</methodname>
- .
+ <methodname>EvEmbed::__construct</methodname>.
</para>
</refsect1>
<refsect1 role="returnvalues">
diff --git a/reference/ev/evloop/nowupdate.xml b/reference/ev/evloop/nowupdate.xml
index 763a945eecb3..d545c355c207 100644
--- a/reference/ev/evloop/nowupdate.xml
+++ b/reference/ev/evloop/nowupdate.xml
@@ -20,8 +20,7 @@
<methodname>EvLoop::now</methodname>
in the progress. This is a costly operation and is usually done
automatically within
- <methodname>EvLoop::run</methodname>
- .
+ <methodname>EvLoop::run</methodname>.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/ev/evloop/run.xml b/reference/ev/evloop/run.xml
index 5074e9a781f1..da3090ef1e35 100644
--- a/reference/ev/evloop/run.xml
+++ b/reference/ev/evloop/run.xml
@@ -28,8 +28,7 @@
is &true;), in which case the return value will be &false;. The return
value can generally be interpreted as
<emphasis>if &true;, there is more work left
- to do</emphasis>
- .
+ to do</emphasis>.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -83,8 +82,7 @@
<para>
See
<link linkend="ev.constants.run-flags">the run flag
- constants</link>
- .
+ constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evloop/stop.xml b/reference/ev/evloop/stop.xml
index d92adf591505..e455f9fc64c6 100644
--- a/reference/ev/evloop/stop.xml
+++ b/reference/ev/evloop/stop.xml
@@ -32,8 +32,7 @@
One of
<emphasis>Ev::BREAK_*</emphasis>
<link
- linkend="ev.constants.break-flags">constants</link>
- .
+ linkend="ev.constants.break-flags">constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evloop/verify.xml b/reference/ev/evloop/verify.xml
index d550eb81d022..459d713c18c6 100644
--- a/reference/ev/evloop/verify.xml
+++ b/reference/ev/evloop/verify.xml
@@ -15,8 +15,8 @@
</methodsynopsis>
<para>
Performs internal consistency checks(for debugging
- <emphasis>libev</emphasis>
- ) and abort the program if any data structures were found to be corrupted.
+ <emphasis>libev</emphasis>)
+ and abort the program if any data structures were found to be corrupted.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/ev/evperiodic.xml b/reference/ev/evperiodic.xml
index 67314382dcde..3d870af2df6d 100644
--- a/reference/ev/evperiodic.xml
+++ b/reference/ev/evperiodic.xml
@@ -12,8 +12,7 @@
</para>
<para>
Unlike
- <classname>EvTimer</classname>
- ,
+ <classname>EvTimer</classname>,
<classname>EvPeriodic</classname>
watchers are not based on real time(or relative time, the physical time
that passes) but on wall clock time(absolute time, calendar or clock). The
@@ -30,12 +29,12 @@
(e.g.
<methodname>EvLoop::now</methodname>
+
- <literal>10.0</literal>
- , i.e. an absolute time, not a delay), and the system clock is reset to
- <emphasis>January of the previous year</emphasis>
- , then it will take a year or more to trigger the event (unlike an
- <classname>EvTimer</classname>
- , which would still trigger roughly
+ <literal>10.0</literal>,
+ i.e. an absolute time, not a delay), and the system clock is reset to
+ <emphasis>January of the previous year</emphasis>,
+ then it will take a year or more to trigger the event (unlike an
+ <classname>EvTimer</classname>,
+ which would still trigger roughly
<literal>10</literal>
seconds after starting it as it uses a relative timeout).
</para>
@@ -100,8 +99,8 @@
<para>
When repeating, this contains the offset value, otherwise this is the
absolute point in time(the offset value passed to
- <methodname>EvPeriodic::set</methodname>
- , although
+ <methodname>EvPeriodic::set</methodname>,
+ although
<emphasis>libev</emphasis>
might modify this value for better numerical stability).
</para>
diff --git a/reference/ev/evperiodic/at.xml b/reference/ev/evperiodic/at.xml
index 59204b0f7e92..9784a6d4158c 100644
--- a/reference/ev/evperiodic/at.xml
+++ b/reference/ev/evperiodic/at.xml
@@ -19,8 +19,8 @@
supposed to trigger next. This is not the same as the offset argument to
<methodname>EvPeriodic::set</methodname>
or
- <methodname>EvPeriodic::__construct</methodname>
- , but indeed works even in interval mode.
+ <methodname>EvPeriodic::__construct</methodname>,
+ but indeed works even in interval mode.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/ev/evperiodic/construct.xml b/reference/ev/evperiodic/construct.xml
index aea93906da07..31dd5d56a4ed 100644
--- a/reference/ev/evperiodic/construct.xml
+++ b/reference/ev/evperiodic/construct.xml
@@ -89,8 +89,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evperiodic/createstopped.xml b/reference/ev/evperiodic/createstopped.xml
index 96da47b3c967..aa4ba3bdeab7 100644
--- a/reference/ev/evperiodic/createstopped.xml
+++ b/reference/ev/evperiodic/createstopped.xml
@@ -92,8 +92,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evperiodic/set.xml b/reference/ev/evperiodic/set.xml
index 90b08c89a379..5aa376631fe3 100644
--- a/reference/ev/evperiodic/set.xml
+++ b/reference/ev/evperiodic/set.xml
@@ -34,8 +34,8 @@
<listitem>
<para>
The same meaning as for
- <methodname>EvPeriodic::__construct</methodname>
- . See
+ <methodname>EvPeriodic::__construct</methodname>.
+ See
<link linkend="ev.periodic-modes">Periodic watcher operation modes</link>
</para>
</listitem>
@@ -47,8 +47,8 @@
<listitem>
<para>
The same meaning as for
- <methodname>EvPeriodic::__construct</methodname>
- . See
+ <methodname>EvPeriodic::__construct</methodname>.
+ See
<link linkend="ev.periodic-modes">Periodic watcher operation modes</link>
</para>
</listitem>
diff --git a/reference/ev/evprepare/construct.xml b/reference/ev/evprepare/construct.xml
index 224dc9df8143..1c4107c18b40 100644
--- a/reference/ev/evprepare/construct.xml
+++ b/reference/ev/evprepare/construct.xml
@@ -39,8 +39,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evprepare/createstopped.xml b/reference/ev/evprepare/createstopped.xml
index 556aceb484e4..430a421f4fd0 100644
--- a/reference/ev/evprepare/createstopped.xml
+++ b/reference/ev/evprepare/createstopped.xml
@@ -32,8 +32,8 @@
</methodsynopsis>
<para>
Creates a stopped instance of EvPrepare watcher. Unlike
- <methodname>EvPrepare::__construct</methodname>
- , this method doesn' start the watcher automatically.
+ <methodname>EvPrepare::__construct</methodname>,
+ this method doesn' start the watcher automatically.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -46,8 +46,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evsignal/construct.xml b/reference/ev/evsignal/construct.xml
index 7d7a1c84c7e6..ae6c485662c9 100644
--- a/reference/ev/evsignal/construct.xml
+++ b/reference/ev/evsignal/construct.xml
@@ -62,8 +62,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evsignal/createstopped.xml b/reference/ev/evsignal/createstopped.xml
index 36c02c4e0728..bbd91d52e0fa 100644
--- a/reference/ev/evsignal/createstopped.xml
+++ b/reference/ev/evsignal/createstopped.xml
@@ -36,8 +36,8 @@
</methodsynopsis>
<para>
Create stopped EvSignal watcher object. Unlike
- <methodname>EvSignal::__construct</methodname>
- , this method does't start the watcher automatically.
+ <methodname>EvSignal::__construct</methodname>,
+ this method does't start the watcher automatically.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -64,8 +64,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evstat.xml b/reference/ev/evstat.xml
index 8f15aad076e1..7044949ae5b9 100644
--- a/reference/ev/evstat.xml
+++ b/reference/ev/evstat.xml
@@ -28,8 +28,8 @@
The path must not end in a slash or contain special components such as
<literal>'.'</literal>
or
- <literal>..</literal>
- . The path should be absolute: if it is relative and the working directory
+ <literal>..</literal>.
+ The path should be absolute: if it is relative and the working directory
changes, then the behaviour is undefined.
</para>
<para>
@@ -45,8 +45,8 @@
change dynamically).
<emphasis>libev</emphasis>
will also impose a minimum interval which is currently around
- <literal>0.1</literal>
- , but that’s usually overkill.
+ <literal>0.1</literal>,
+ but that’s usually overkill.
</para>
<para>
This watcher type is not meant for massive numbers of
@@ -104,8 +104,8 @@
</term>
<listitem>
<para>
- <emphasis>Readonly</emphasis>
- . Hint on how quickly a change is expected to be detected and should
+ <emphasis>Readonly</emphasis>.
+ Hint on how quickly a change is expected to be detected and should
normally be specified as
<literal>0.0</literal>
to let
@@ -120,8 +120,8 @@
</term>
<listitem>
<para>
- <emphasis>Readonly</emphasis>
- . The path to wait for status changes on.
+ <emphasis>Readonly</emphasis>.
+ The path to wait for status changes on.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evstat/construct.xml b/reference/ev/evstat/construct.xml
index 177d6edd2de1..4164eb7f21a8 100644
--- a/reference/ev/evstat/construct.xml
+++ b/reference/ev/evstat/construct.xml
@@ -74,8 +74,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evstat/createstopped.xml b/reference/ev/evstat/createstopped.xml
index 9e932f44578f..bee117b50baf 100644
--- a/reference/ev/evstat/createstopped.xml
+++ b/reference/ev/evstat/createstopped.xml
@@ -80,8 +80,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evstat/prev.xml b/reference/ev/evstat/prev.xml
index 4be4e46e232c..209ec3af84f5 100644
--- a/reference/ev/evstat/prev.xml
+++ b/reference/ev/evstat/prev.xml
@@ -15,8 +15,8 @@
</methodsynopsis>
<para>
Just like
- <methodname>EvStat::attr</methodname>
- , but returns the previous set of values.
+ <methodname>EvStat::attr</methodname>,
+ but returns the previous set of values.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -27,8 +27,8 @@
&reftitle.returnvalues;
<para>
Returns an array with the same structure as the array returned by
- <methodname>EvStat::attr</methodname>
- . The array contains previously detected values.
+ <methodname>EvStat::attr</methodname>.
+ The array contains previously detected values.
</para>
</refsect1>
<refsect1 role="seealso">
diff --git a/reference/ev/evstat/stat.xml b/reference/ev/evstat/stat.xml
index ea5418337482..1c1b159c5661 100644
--- a/reference/ev/evstat/stat.xml
+++ b/reference/ev/evstat/stat.xml
@@ -15,8 +15,8 @@
</methodsynopsis>
<para>
Initiates the stat call(updates internal cache). It stats(using
- <literal>lstat</literal>
- ) the
+ <literal>lstat</literal>)
+ the
<varname>path</varname>
specified in the watcher and sets to the values found.
</para>
diff --git a/reference/ev/evtimer.xml b/reference/ev/evtimer.xml
index 6854f5455ddf..f610a9d30039 100644
--- a/reference/ev/evtimer.xml
+++ b/reference/ev/evtimer.xml
@@ -15,8 +15,8 @@
<para>
The timers are based on real time, that is, if one registers an event that
times out after an hour and resets the system clock to
- <emphasis>January last year</emphasis>
- , it will still time out after(roughly) one hour. "Roughly" because
+ <emphasis>January last year</emphasis>,
+ it will still time out after(roughly) one hour. "Roughly" because
detecting time jumps is hard, and some inaccuracies are unavoidable.
</para>
<para>
@@ -92,8 +92,8 @@
<listitem>
<para>
If repeat is
- <literal>0.0</literal>
- , then it will automatically be stopped once the timeout is reached. If
+ <literal>0.0</literal>,
+ then it will automatically be stopped once the timeout is reached. If
it is positive, then the timer will automatically be configured to
trigger again every repeat seconds later, until stopped manually.
</para>
@@ -119,16 +119,15 @@
and
<parameter>repeat</parameter>
value of
- <literal>7.0</literal>
- ,
+ <literal>7.0</literal>,
<varname>remaining</varname>
returns
- <literal>5.0</literal>
- . When the timer is started and one second passes,
+ <literal>5.0</literal>.
+ When the timer is started and one second passes,
<varname>remaining</varname>
will return
- <literal>4.0</literal>
- . When the timer expires and is restarted, it will return roughly
+ <literal>4.0</literal>.
+ When the timer expires and is restarted, it will return roughly
<literal>7.0</literal>
(likely slightly less as callback invocation takes some time too), and
so on.
diff --git a/reference/ev/evtimer/construct.xml b/reference/ev/evtimer/construct.xml
index 3a92544f2361..405b1f23194c 100644
--- a/reference/ev/evtimer/construct.xml
+++ b/reference/ev/evtimer/construct.xml
@@ -61,8 +61,8 @@
<listitem>
<para>
If repeat is
- <literal>0.0</literal>
- , then it will automatically be stopped once the timeout is reached. If
+ <literal>0.0</literal>,
+ then it will automatically be stopped once the timeout is reached. If
it is positive, then the timer will automatically be configured to
trigger again every repeat seconds later, until stopped manually.
</para>
@@ -75,8 +75,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evtimer/createstopped.xml b/reference/ev/evtimer/createstopped.xml
index 27f1381b4a5f..c741f179ddea 100644
--- a/reference/ev/evtimer/createstopped.xml
+++ b/reference/ev/evtimer/createstopped.xml
@@ -40,8 +40,8 @@
</methodsynopsis>
<para>
Creates EvTimer stopped watcher object. Unlike
- <methodname>EvTimer::__construct</methodname>
- , this method doesn't start the watcher automatically.
+ <methodname>EvTimer::__construct</methodname>,
+ this method doesn't start the watcher automatically.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -66,8 +66,8 @@
<listitem>
<para>
If repeat is
- <literal>0.0</literal>
- , then it will automatically be stopped once the timeout is reached. If
+ <literal>0.0</literal>,
+ then it will automatically be stopped once the timeout is reached. If
it is positive, then the timer will automatically be configured to
trigger again every repeat seconds later, until stopped manually.
</para>
@@ -80,8 +80,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evtimer/set.xml b/reference/ev/evtimer/set.xml
index d8c11e0a18e6..363da02feb27 100644
--- a/reference/ev/evtimer/set.xml
+++ b/reference/ev/evtimer/set.xml
@@ -46,8 +46,8 @@
<listitem>
<para>
If repeat is
- <literal>0.0</literal>
- , then it will automatically be stopped once the timeout is reached. If
+ <literal>0.0</literal>,
+ then it will automatically be stopped once the timeout is reached. If
it is positive, then the timer will automatically be configured to
trigger again every repeat seconds later, until stopped manually.
</para>
diff --git a/reference/ev/evwatcher.xml b/reference/ev/evwatcher.xml
index 49c827604d85..582b15225027 100644
--- a/reference/ev/evwatcher.xml
+++ b/reference/ev/evwatcher.xml
@@ -10,14 +10,13 @@
<para>
<classname>EvWatcher</classname>
is a base class for all watchers(
- <classname>EvCheck</classname>
- ,
+ <classname>EvCheck</classname>,
<classname>EvChild</classname>
etc.). Since
<classname>EvWatcher</classname>
's constructor is
- <modifier>abstract</modifier>
- , one can't(and don't need to) create EvWatcher objects
+ <modifier>abstract</modifier>,
+ one can't(and don't need to) create EvWatcher objects
directly.
</para>
</section>
@@ -71,8 +70,8 @@
</term>
<listitem>
<para>
- <emphasis>Readonly</emphasis>
- . &true; if the watcher is active. &false; otherwise.
+ <emphasis>Readonly</emphasis>.
+ &true; if the watcher is active. &false; otherwise.
</para>
</listitem>
</varlistentry>
@@ -111,8 +110,8 @@
between
<constant>Ev::MINPRI</constant>
and
- <constant>Ev::MAXPRI</constant>
- . Pending watchers with higher priority will be invoked before watchers
+ <constant>Ev::MAXPRI</constant>.
+ Pending watchers with higher priority will be invoked before watchers
with lower priority, but priority will not keep watchers from being
executed(except for
<classname>EvIdle</classname>
diff --git a/reference/ev/evwatcher/clear.xml b/reference/ev/evwatcher/clear.xml
index a325a169a5e1..f5732410c4dc 100644
--- a/reference/ev/evwatcher/clear.xml
+++ b/reference/ev/evwatcher/clear.xml
@@ -20,8 +20,7 @@
<varname>revents</varname>
bitset(as if its callback was invoked). If the watcher isn't pending
it does nothing and returns
- <literal>0</literal>
- .
+ <literal>0</literal>.
</para>
<para>
Sometimes it can be useful to "poll" a watcher instead of waiting for its
@@ -41,8 +40,7 @@
<link
linkend="ev.watcher-callbacks">watcher callback</link>
had been invoked. Otherwise returns
- <literal>0</literal>
- .
+ <literal>0</literal>.
</para>
</refsect1>
</refentry>
diff --git a/reference/ev/evwatcher/feed.xml b/reference/ev/evwatcher/feed.xml
index 620ee51b36e3..1b1d7a9e984f 100644
--- a/reference/ev/evwatcher/feed.xml
+++ b/reference/ev/evwatcher/feed.xml
@@ -31,8 +31,7 @@
<listitem>
<para>
Bit mask of watcher
- <link linkend="ev.constants.watcher-revents">received events</link>
- .
+ <link linkend="ev.constants.watcher-revents">received events</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evwatcher/invoke.xml b/reference/ev/evwatcher/invoke.xml
index 1b9a84e47eef..a25411de6e91 100644
--- a/reference/ev/evwatcher/invoke.xml
+++ b/reference/ev/evwatcher/invoke.xml
@@ -31,8 +31,7 @@
<listitem>
<para>
Bit mask of watcher
- <link linkend="ev.constants.watcher-revents">received events</link>
- .
+ <link linkend="ev.constants.watcher-revents">received events</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/evwatcher/setcallback.xml b/reference/ev/evwatcher/setcallback.xml
index c1a6ab8b67f7..2119a11ea8f2 100644
--- a/reference/ev/evwatcher/setcallback.xml
+++ b/reference/ev/evwatcher/setcallback.xml
@@ -30,8 +30,7 @@
<listitem>
<para>
See
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/ev/periodic-modes.xml b/reference/ev/periodic-modes.xml
index f6013b56ed56..fdc04a9326a7 100644
--- a/reference/ev/periodic-modes.xml
+++ b/reference/ev/periodic-modes.xml
@@ -5,8 +5,7 @@
<para>
<classname>EvPeriodic</classname>
watcher works in different modes depending on the
- <parameter>offset</parameter>
- ,
+ <parameter>offset</parameter>,
<parameter>interval</parameter>
and
<parameter>reschedule_cb</parameter>
@@ -15,12 +14,11 @@
<orderedlist>
<listitem>
<para>
- <emphasis>Absolute timer</emphasis>
- . In this mode
+ <emphasis>Absolute timer</emphasis>.
+ In this mode
<parameter>interval</parameter>
=
- <literal>0</literal>
- ,
+ <literal>0</literal>,
<parameter>reschedule_cb</parameter>
= &null;. This time simply fires at the wallclock time
<parameter>offset</parameter>
@@ -33,12 +31,11 @@
</listitem>
<listitem>
<para>
- <emphasis>Repeating interval timer</emphasis>
- . In this mode
+ <emphasis>Repeating interval timer</emphasis>.
+ In this mode
<parameter>interval</parameter>
>
- <literal>0</literal>
- ,
+ <literal>0</literal>,
<parameter>reschedule_cb</parameter>
= &null;; the watcher will always be scheduled to timeout at the next
<parameter>offset</parameter>
@@ -47,8 +44,8 @@
*
<parameter>interval</parameter>
time(for some integer
- <constant>N</constant>
- ) and then repeat, regardless of any time jumps.
+ <constant>N</constant>)
+ and then repeat, regardless of any time jumps.
</para>
<para>
This can be used to create timers that do not drift with respect to system
@@ -83,12 +80,11 @@ $hourly = EvPeriodic(0, 3600, NULL, function () {
</listitem>
<listitem>
<para>
- <emphasis>Manual reschedule mode</emphasis>
- . In this mode
+ <emphasis>Manual reschedule mode</emphasis>.
+ In this mode
<parameter>reschedule_cb</parameter>
is a
- <type>callable</type>
- .
+ <type>callable</type>.
</para>
<para>
<parameter>interval</parameter>
@@ -96,8 +92,8 @@ $hourly = EvPeriodic(0, 3600, NULL, function () {
<parameter>offset</parameter>
are both being ignored. Instead, each time the periodic watcher gets
scheduled, the reschedule callback (
- <parameter>reschedule_cb</parameter>
- ) will be called with the watcher as first, and the current time as second
+ <parameter>reschedule_cb</parameter>)
+ will be called with the watcher as first, and the current time as second
argument.
</para>
<para>
diff --git a/reference/ev/setup.xml b/reference/ev/setup.xml
index d124e0f0240f..3bbf2d413b6a 100644
--- a/reference/ev/setup.xml
+++ b/reference/ev/setup.xml
@@ -18,8 +18,7 @@
</para>
<para>
&pecl.info;
- <link xlink:href="&url.pecl.package;ev">&url.pecl.package;ev</link>
- .
+ <link xlink:href="&url.pecl.package;ev">&url.pecl.package;ev</link>.
</para>
</section>
</chapter>
diff --git a/reference/ev/watcher-callbacks.xml b/reference/ev/watcher-callbacks.xml
index d30955170770..e5ee8cc1a15f 100644
--- a/reference/ev/watcher-callbacks.xml
+++ b/reference/ev/watcher-callbacks.xml
@@ -16,8 +16,7 @@
from
<classname>EvWatcher</classname>
-
- <methodname>EvCheck::__construct</methodname>
- ,
+ <methodname>EvCheck::__construct</methodname>,
<methodname>EvChild::__construct</methodname>
etc.). A watcher callback should match the following prototype:
</para>
@@ -57,8 +56,7 @@
</term>
<listitem>
<para>
- <link linkend="ev.constants.watcher-revents">Watcher received events</link>
- .
+ <link linkend="ev.constants.watcher-revents">Watcher received events</link>.
</para>
</listitem>
</varlistentry>
@@ -66,25 +64,23 @@
</para>
<para>
Each watcher type has its associated bit in
- <parameter>revents</parameter>
- , so one can use the same callback for multiple watchers. The event mask is
+ <parameter>revents</parameter>,
+ so one can use the same callback for multiple watchers. The event mask is
named after the type, i.e.
<classname>EvChild</classname>
(or
- <methodname>EvLoop::child</methodname>
- ) sets
- <constant>EV::CHILD</constant>
- ,
+ <methodname>EvLoop::child</methodname>)
+ sets
+ <constant>EV::CHILD</constant>,
<classname>EvPrepare</classname>
(or
- <methodname>EvLoop::prepare</methodname>
- ) sets
- <constant>Ev::PREPARE</constant>
- ,
+ <methodname>EvLoop::prepare</methodname>)
+ sets
+ <constant>Ev::PREPARE</constant>,
<classname>EvPeriodic</classname>
(or
- <methodname>EvLoop::periodic</methodname>
- ) sets
+ <methodname>EvLoop::periodic</methodname>)
+ sets
<constant>Ev::PERIODIC</constant>
and so on, with the exception of I/O events (which can set both
<constant>Ev::READ</constant>
diff --git a/reference/ev/watchers.xml b/reference/ev/watchers.xml
index 23d14f86612f..4297b7f8530a 100644
--- a/reference/ev/watchers.xml
+++ b/reference/ev/watchers.xml
@@ -23,8 +23,7 @@ Ev::run(Ev::RUN_ONCE);
All the watcher constructors automatically start the watchers.
<literal>createStopped</literal>
methods create stopped watchers(e.g.
- <methodname>EvIo::createStopped</methodname>
- )
+ <methodname>EvIo::createStopped</methodname>)
</para>
<para>
Note that a watcher will automatically be stopped when the watcher object is
@@ -33,16 +32,14 @@ Ev::run(Ev::RUN_ONCE);
</para>
<para>
Note also that all methods changing some watcher property(
- <emphasis>set</emphasis>
- ,
+ <emphasis>set</emphasis>,
<varname>priority</varname>
etc.) automatically stop and start it again if it is active, which means
pending events get lost.
</para>
<para>
See also:
- <link linkend="ev.watcher-callbacks">Watcher callbacks</link>
- .
+ <link linkend="ev.watcher-callbacks">Watcher callbacks</link>.
</para>
</chapter>
<!-- Keep this comment at the end of the file
diff --git a/reference/event/book.xml b/reference/event/book.xml
index b22ddaa3ff0e..d6bd18e14f62 100644
--- a/reference/event/book.xml
+++ b/reference/event/book.xml
@@ -14,8 +14,7 @@
<note xmlns="http://docbook.org/ns/docbook">
<para>
Note, Windows support introduced in
- <literal>event-1.9.0</literal>
- .
+ <literal>event-1.9.0</literal>.
</para>
</note>
<para>
diff --git a/reference/event/event.callbacks.xml b/reference/event/event.callbacks.xml
index f81eba30a777..16634fe4cc19 100644
--- a/reference/event/event.callbacks.xml
+++ b/reference/event/event.callbacks.xml
@@ -7,12 +7,11 @@
becomes active. To associate a callback with event one can pass a
<type>callable</type>
to either
- <methodname>Event::__construct</methodname>
- , or
- <methodname>Event::set</methodname>
- , or one of the factory methods like
- <methodname>Event::timer</methodname>
- .
+ <methodname>Event::__construct</methodname>,
+ or
+ <methodname>Event::set</methodname>,
+ or one of the factory methods like
+ <methodname>Event::timer</methodname>.
</para>
<para>
An event callback should match the following prototype:
diff --git a/reference/event/event.constructing.signal.events.xml b/reference/event/event.constructing.signal.events.xml
index 06879f541506..1e7b9e472ef8 100644
--- a/reference/event/event.constructing.signal.events.xml
+++ b/reference/event/event.constructing.signal.events.xml
@@ -67,8 +67,7 @@ $base->loop();
<link
xlink:href="http://www.wangafu.net/~nickm/libevent-book/Ref4_event.html#_constructing_signal_events">Fast
portable non-blocking network programming with Libevent, Constructing Signal
- Events</link>
- .
+ Events</link>.
</para>
</chapter>
<!-- Keep this comment at the end of the file
diff --git a/reference/event/event.flags.xml b/reference/event/event.flags.xml
index 3601023c81fc..739220413c19 100644
--- a/reference/event/event.flags.xml
+++ b/reference/event/event.flags.xml
@@ -22,8 +22,8 @@
<constant>Event::TIMEOUT</constant>
flag is ignored when constructing an event: one can either set a timeout
when event is
- <emphasis>added</emphasis>
- , or not. It is set in the
+ <emphasis>added</emphasis>,
+ or not. It is set in the
<literal>$what</literal>
argument to the callback function when a timeout has occurred.
</para>
diff --git a/reference/event/event.persistence.xml b/reference/event/event.persistence.xml
index ff5e5304eb61..648ef79c3640 100644
--- a/reference/event/event.persistence.xml
+++ b/reference/event/event.persistence.xml
@@ -14,8 +14,8 @@
If the
<constant>Event::PERSIST</constant>
flag is set on an event, however, the event is
- <emphasis>persistent</emphasis>
- . This means that event remains pending even when its callback is activated.
+ <emphasis>persistent</emphasis>.
+ This means that event remains pending even when its callback is activated.
<methodname>Event::del</methodname>
method can be called to make it non-pending.
</para>
diff --git a/reference/event/event.xml b/reference/event/event.xml
index b3fa0f9f20b0..8d642cb0275d 100644
--- a/reference/event/event.xml
+++ b/reference/event/event.xml
@@ -16,8 +16,8 @@
</para>
<para>
Every event is associated with
- <classname>EventBase</classname>
- . However, event will never fire until it is
+ <classname>EventBase</classname>.
+ However, event will never fire until it is
<emphasis>added</emphasis>
(via
<methodname>Event::add</methodname>
@@ -27,8 +27,8 @@
<emphasis>active</emphasis>
state. To handle events user may register a callback which is called when
event becomes active. If event is configured
- <emphasis>persistent</emphasis>
- , it remains pending. If it is not persistent, it stops being pending when
+ <emphasis>persistent</emphasis>,
+ it remains pending. If it is not persistent, it stops being pending when
it's callback runs.
<methodname>Event::del</methodname>
method
@@ -115,8 +115,7 @@
<listitem>
<para>
Whether event is pending. See
- <link linkend="event.persistence">About event persistence</link>
- .
+ <link linkend="event.persistence">About event persistence</link>.
</para>
</listitem>
</varlistentry>
@@ -138,8 +137,7 @@
semantics of
<constant>Event::READ</constant>
and
- <constant>Event::WRITE</constant>
- .
+ <constant>Event::WRITE</constant>.
</para>
</listitem>
</varlistentry>
@@ -150,8 +148,7 @@
<listitem>
<para>
Indicates that the event is persistent. See
- <link linkend="event.persistence">About event persistence</link>
- .
+ <link linkend="event.persistence">About event persistence</link>.
</para>
</listitem>
</varlistentry>
@@ -202,8 +199,8 @@
<constant>Event::TIMEOUT</constant>
flag is ignored when constructing an event: one can either set a
timeout when event is
- <emphasis>added</emphasis>
- , or not. It is set in the
+ <emphasis>added</emphasis>,
+ or not. It is set in the
<literal>$what</literal>
argument to the callback function when a timeout has occurred.
</para>
diff --git a/reference/event/event/construct.xml b/reference/event/event/construct.xml
index bf102e2b6476..0b3494f67a7a 100644
--- a/reference/event/event/construct.xml
+++ b/reference/event/event/construct.xml
@@ -58,10 +58,9 @@
<para>
stream resource, socket resource, or numeric file descriptor. For timer
events pass
- <constant>-1</constant>
- . For signal events pass the signal number, e.g.
- <constant>SIGHUP</constant>
- .
+ <constant>-1</constant>.
+ For signal events pass the signal number, e.g.
+ <constant>SIGHUP</constant>.
</para>
</listitem>
</varlistentry>
@@ -72,8 +71,7 @@
<listitem>
<para>
Event flags. See
- <link linkend="event.flags">Event flags</link>
- .
+ <link linkend="event.flags">Event flags</link>.
</para>
</listitem>
</varlistentry>
@@ -84,8 +82,7 @@
<listitem>
<para>
The event callback. See
- <link linkend="event.callbacks">Event callbacks</link>
- .
+ <link linkend="event.callbacks">Event callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/event/free.xml b/reference/event/event/free.xml
index 336d18323c37..f365fb31d7fe 100644
--- a/reference/event/event/free.xml
+++ b/reference/event/event/free.xml
@@ -24,8 +24,8 @@
<methodname>Event::free</methodname>
method currently doesn't destruct the object itself. To destruct the
object completely call
- <function>unset</function>
- , or assign &null;.
+ <function>unset</function>,
+ or assign &null;.
</para>
</warning>
</refsect1>
diff --git a/reference/event/event/pending.xml b/reference/event/event/pending.xml
index c27611b50eea..a3e811a4f93d 100644
--- a/reference/event/event/pending.xml
+++ b/reference/event/event/pending.xml
@@ -30,14 +30,10 @@
<listitem>
<para>
One of, or a composition of the following constants:
- <constant>Event::READ</constant>
- ,
- <constant>Event::WRITE</constant>
- ,
- <constant>Event::TIMEOUT</constant>
- ,
- <constant>Event::SIGNAL</constant>
- .
+ <constant>Event::READ</constant>,
+ <constant>Event::WRITE</constant>,
+ <constant>Event::TIMEOUT</constant>,
+ <constant>Event::SIGNAL</constant>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/event/set.xml b/reference/event/event/set.xml
index f2604ede0abe..b52ffb25b29d 100644
--- a/reference/event/event/set.xml
+++ b/reference/event/event/set.xml
@@ -58,10 +58,9 @@
<para>
Stream resource, socket resource, or numeric file descriptor. For timer
events pass
- <constant>-1</constant>
- . For signal events pass the signal number, e.g.
- <constant>SIGHUP</constant>
- .
+ <constant>-1</constant>.
+ For signal events pass the signal number, e.g.
+ <constant>SIGHUP</constant>.
</para>
</listitem>
</varlistentry>
@@ -72,8 +71,7 @@
<listitem>
<para>
See
- <link linkend="event.flags">Event flags</link>
- .
+ <link linkend="event.flags">Event flags</link>.
</para>
</listitem>
</varlistentry>
@@ -84,8 +82,7 @@
<listitem>
<para>
The event callback. See
- <link linkend="event.callbacks">Event callbacks</link>
- .
+ <link linkend="event.callbacks">Event callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/event/settimer.xml b/reference/event/event/settimer.xml
index 4da62cd8f95f..3083fef92e1f 100644
--- a/reference/event/event/settimer.xml
+++ b/reference/event/event/settimer.xml
@@ -27,8 +27,8 @@
<para>
Re-configures timer event. Note, this function doesn't invoke obsolete
libevent's
- <literal>event_set</literal>
- . It calls
+ <literal>event_set</literal>.
+ It calls
<literal>event_assign</literal>
instead.
</para>
@@ -53,8 +53,7 @@
<listitem>
<para>
The timer event callback. See
- <link linkend="event.callbacks">Event callbacks</link>
- .
+ <link linkend="event.callbacks">Event callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/event/signal.xml b/reference/event/event/signal.xml
index 381d94a58ba5..62b101a780a1 100644
--- a/reference/event/event/signal.xml
+++ b/reference/event/event/signal.xml
@@ -66,8 +66,7 @@
<listitem>
<para>
The signal event callback. See
- <link linkend="event.callbacks">Event callbacks</link>
- .
+ <link linkend="event.callbacks">Event callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/event/timer.xml b/reference/event/event/timer.xml
index fe63212b5283..d9e64bd10d30 100644
--- a/reference/event/event/timer.xml
+++ b/reference/event/event/timer.xml
@@ -52,8 +52,7 @@
<listitem>
<para>
The signal event callback. See
- <link linkend="event.callbacks">Event callbacks</link>
- .
+ <link linkend="event.callbacks">Event callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbase.xml b/reference/event/eventbase.xml
index e2a74f58bced..6709816daca7 100644
--- a/reference/event/eventbase.xml
+++ b/reference/event/eventbase.xml
@@ -14,25 +14,19 @@
</para>
<para>
Each event base has a
- <emphasis>method</emphasis>
- , or a
+ <emphasis>method</emphasis>,
+ or a
<emphasis>backend</emphasis>
that it uses to determine which events are ready. The recognized methods
are:
- <literal>select</literal>
- ,
- <literal>poll</literal>
- ,
- <literal>epoll</literal>
- ,
- <literal>kqueue</literal>
- ,
- <literal>devpoll</literal>
- ,
+ <literal>select</literal>,
+ <literal>poll</literal>,
+ <literal>epoll</literal>,
+ <literal>kqueue</literal>,
+ <literal>devpoll</literal>,
<literal>evport</literal>
and
- <literal>win32</literal>
- .
+ <literal>win32</literal>.
</para>
<para>
To configure event base to use, or avoid specific backend
@@ -200,8 +194,7 @@
</para>
<para>
This flag has no effect if one winds up using a backend other than
- <literal>epoll</literal>
- .
+ <literal>epoll</literal>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbase/free.xml b/reference/event/eventbase/free.xml
index 390cc7f5bfd5..21b8284e0694 100644
--- a/reference/event/eventbase/free.xml
+++ b/reference/event/eventbase/free.xml
@@ -22,8 +22,8 @@
<methodname>EventBase::free</methodname>
method doesn't destruct the object itself. To destruct the
object completely call
- <function>unset</function>
- , or assign &null;.
+ <function>unset</function>,
+ or assign &null;.
</para>
<para>
This method does not deallocate or detach any of the events that are
diff --git a/reference/event/eventbase/getfeatures.xml b/reference/event/eventbase/getfeatures.xml
index 93d434b2015c..9824e6fddc08 100644
--- a/reference/event/eventbase/getfeatures.xml
+++ b/reference/event/eventbase/getfeatures.xml
@@ -25,8 +25,7 @@
&reftitle.returnvalues;
<para>
Returns integer representing a bitmask of supported features. See
- <link linkend="eventconfig.constants">EventConfig::FEATURE_* constants</link>
- .
+ <link linkend="eventconfig.constants">EventConfig::FEATURE_* constants</link>.
</para>
</refsect1>
<refsect1 role="examples">
diff --git a/reference/event/eventbase/gotexit.xml b/reference/event/eventbase/gotexit.xml
index f91c8081eeba..b5caa3053e16 100644
--- a/reference/event/eventbase/gotexit.xml
+++ b/reference/event/eventbase/gotexit.xml
@@ -15,8 +15,7 @@
</methodsynopsis>
<para>
Checks if the event loop was told to exit by
- <methodname>EventBase::exit</methodname>
- .
+ <methodname>EventBase::exit</methodname>.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -27,8 +26,8 @@
&reftitle.returnvalues;
<para>
Returns &true;, event loop was told to exit by
- <methodname>EventBase::exit</methodname>
- . Otherwise &false;.
+ <methodname>EventBase::exit</methodname>.
+ Otherwise &false;.
</para>
</refsect1>
<refsect1 role="seealso">
diff --git a/reference/event/eventbase/gotstop.xml b/reference/event/eventbase/gotstop.xml
index 38a4f6b2344d..3a58c448558c 100644
--- a/reference/event/eventbase/gotstop.xml
+++ b/reference/event/eventbase/gotstop.xml
@@ -15,8 +15,7 @@
</methodsynopsis>
<para>
Checks if the event loop was told to exit by
- <methodname>EventBase::stop</methodname>
- .
+ <methodname>EventBase::stop</methodname>.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -27,8 +26,8 @@
&reftitle.returnvalues;
<para>
Returns &true;, event loop was told to stop by
- <methodname>EventBase::stop</methodname>
- . Otherwise &false;.
+ <methodname>EventBase::stop</methodname>.
+ Otherwise &false;.
</para>
</refsect1>
<refsect1 role="seealso">
diff --git a/reference/event/eventbase/loop.xml b/reference/event/eventbase/loop.xml
index a4545f81f0df..9a2f74301c66 100644
--- a/reference/event/eventbase/loop.xml
+++ b/reference/event/eventbase/loop.xml
@@ -38,8 +38,7 @@
Optional flags. One of
<literal>EventBase::LOOP_*</literal>
constants. See
- <link linkend="eventbase.constants">EventBase constants</link>
- .
+ <link linkend="eventbase.constants">EventBase constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbuffer.xml b/reference/event/eventbuffer.xml
index cede46cb2fe9..1b4c35c41880 100644
--- a/reference/event/eventbuffer.xml
+++ b/reference/event/eventbuffer.xml
@@ -149,8 +149,7 @@
since the standards generally prescribe a
<literal>"\r\n"</literal>
line-terminator, but nonconformant clients sometimes say just
- <literal>"\n"</literal>
- .
+ <literal>"\n"</literal>.
</para>
</listitem>
</varlistentry>
@@ -162,8 +161,8 @@
<para>
The end of a line is a single carriage return, followed by a single
linefeed. (This is also known as
- <literal>"\r\n"</literal>
- . The ASCII values are
+ <literal>"\r\n"</literal>.
+ The ASCII values are
<literal>0x0D</literal>
<literal>0x0A</literal>
).
@@ -178,8 +177,8 @@
<para>
The end of a line is a single linefeed character. (This is also known
as
- <literal>"\n"</literal>
- . It is ASCII value is
+ <literal>"\n"</literal>.
+ It is ASCII value is
<literal>0x0A</literal>
.)
</para>
@@ -205,8 +204,8 @@
<listitem>
<para>
The same as
- <constant>EventBuffer::PTR_SET</constant>
- , except this flag causes
+ <constant>EventBuffer::PTR_SET</constant>,
+ except this flag causes
<methodname>EventBuffer::setPosition</methodname>
method to move position forward up to the specified number of
bytes(instead of setting absolute position).
diff --git a/reference/event/eventbuffer/addbuffer.xml b/reference/event/eventbuffer/addbuffer.xml
index 591b1fb9f5cb..bb0b8caf4cd5 100644
--- a/reference/event/eventbuffer/addbuffer.xml
+++ b/reference/event/eventbuffer/addbuffer.xml
@@ -20,8 +20,8 @@
Move all data from the buffer provided in
<parameter>buf</parameter>
parameter to the end of current
- <classname>EventBuffer</classname>
- . This is a destructive add. The data from one buffer moves into the other
+ <classname>EventBuffer</classname>.
+ This is a destructive add. The data from one buffer moves into the other
buffer. However, no unnecessary memory copies occur.
</para>
</refsect1>
diff --git a/reference/event/eventbuffer/copyout.xml b/reference/event/eventbuffer/copyout.xml
index 8b4c373388bc..5b440c52d192 100644
--- a/reference/event/eventbuffer/copyout.xml
+++ b/reference/event/eventbuffer/copyout.xml
@@ -22,12 +22,12 @@
</methodsynopsis>
<para>
Behaves just like
- <methodname>EventBuffer::read</methodname>
- , but does not drain any data from the buffer. I.e. it copies the first
+ <methodname>EventBuffer::read</methodname>,
+ but does not drain any data from the buffer. I.e. it copies the first
<parameter>max_bytes</parameter>
bytes from the front of the buffer into
- <parameter>data</parameter>
- . If there are fewer than
+ <parameter>data</parameter>.
+ If there are fewer than
<parameter>max_bytes</parameter>
bytes available, the function copies all the bytes there are.
</para>
diff --git a/reference/event/eventbuffer/drain.xml b/reference/event/eventbuffer/drain.xml
index dc6e7fdaea41..beb303590a91 100644
--- a/reference/event/eventbuffer/drain.xml
+++ b/reference/event/eventbuffer/drain.xml
@@ -19,8 +19,8 @@
</methodsynopsis>
<para>
Behaves as
- <methodname>EventBuffer::read</methodname>
- , except that it does not copy the data: it just removes it from the front
+ <methodname>EventBuffer::read</methodname>,
+ except that it does not copy the data: it just removes it from the front
of the buffer.
</para>
</refsect1>
diff --git a/reference/event/eventbuffer/prependbuffer.xml b/reference/event/eventbuffer/prependbuffer.xml
index a5409dda19d4..17729d86341a 100644
--- a/reference/event/eventbuffer/prependbuffer.xml
+++ b/reference/event/eventbuffer/prependbuffer.xml
@@ -18,8 +18,8 @@
</methodsynopsis>
<para>
Behaves as
- <methodname>EventBuffer::addBuffer</methodname>
- , except that it moves data to the front of the buffer.
+ <methodname>EventBuffer::addBuffer</methodname>,
+ except that it moves data to the front of the buffer.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/event/eventbuffer/readline.xml b/reference/event/eventbuffer/readline.xml
index 96b34115e1a1..c953eaf20052 100644
--- a/reference/event/eventbuffer/readline.xml
+++ b/reference/event/eventbuffer/readline.xml
@@ -32,8 +32,7 @@
<listitem>
<para>
One of
- <link linkend="eventbuffer.constants">EventBuffer:EOL_* constants</link>
- .
+ <link linkend="eventbuffer.constants">EventBuffer:EOL_* constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbuffer/search.xml b/reference/event/eventbuffer/search.xml
index bec82794ff30..844e3f8b3757 100644
--- a/reference/event/eventbuffer/search.xml
+++ b/reference/event/eventbuffer/search.xml
@@ -29,8 +29,8 @@
</methodsynopsis>
<para>
Scans the buffer for an occurrence of the string
- <parameter>what</parameter>
- . It returns numeric position of the string, or &false; if the string was
+ <parameter>what</parameter>.
+ It returns numeric position of the string, or &false; if the string was
not found.
</para>
<para>
diff --git a/reference/event/eventbuffer/searcheol.xml b/reference/event/eventbuffer/searcheol.xml
index 629485967f8d..9493f4fd0eaa 100644
--- a/reference/event/eventbuffer/searcheol.xml
+++ b/reference/event/eventbuffer/searcheol.xml
@@ -61,8 +61,7 @@
<listitem>
<para>
One of
- <link linkend="eventbuffer.constants">EventBuffer:EOL_* constants</link>
- .
+ <link linkend="eventbuffer.constants">EventBuffer:EOL_* constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbuffer/unlock.xml b/reference/event/eventbuffer/unlock.xml
index 0cf1f84a66d1..fdbc74a61f2c 100644
--- a/reference/event/eventbuffer/unlock.xml
+++ b/reference/event/eventbuffer/unlock.xml
@@ -15,8 +15,7 @@
</methodsynopsis>
<para>
Releases lock acquired by
- <methodname>EventBuffer::lock</methodname>
- .
+ <methodname>EventBuffer::lock</methodname>.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/event/eventbufferevent.about.callbacks.xml b/reference/event/eventbufferevent.about.callbacks.xml
index b23e57156c6a..d1594fabc103 100644
--- a/reference/event/eventbufferevent.about.callbacks.xml
+++ b/reference/event/eventbufferevent.about.callbacks.xml
@@ -6,8 +6,8 @@
An object of
<classname>EventBufferEvent</classname>
class represents a
- <emphasis>buffer event</emphasis>
- . The asynchronous nature of I/O performed by Libevent implies that a
+ <emphasis>buffer event</emphasis>.
+ The asynchronous nature of I/O performed by Libevent implies that a
socket(or other kind of file descriptor) is not always available. Event
invokes corresponding callbacks when the resource becomes available for
reading or writing, or when some event occurs(e.g. error, "end of line"
@@ -53,10 +53,9 @@
<listitem>
<para>
Custom variable attached to all callbacks via
- <methodname>EventBufferEvent::__construct</methodname>
- , or
- <methodname>EventBufferEvent::setCallbacks</methodname>
- .
+ <methodname>EventBufferEvent::__construct</methodname>,
+ or
+ <methodname>EventBufferEvent::setCallbacks</methodname>.
</para>
</listitem>
</varlistentry>
@@ -108,16 +107,13 @@
<listitem>
<para>
Bit mask of events:
- <constant>EventBufferEvent::READING</constant>
- ,
- <constant>EventBufferEvent::WRITING</constant>
- ,
- <constant>EventBufferEvent::EOL</constant>
- ,
+ <constant>EventBufferEvent::READING</constant>,
+ <constant>EventBufferEvent::WRITING</constant>,
+ <constant>EventBufferEvent::EOL</constant>,
<constant>EventBufferEvent::ERROR</constant>
and
- <constant>EventBufferEvent::TIMEOUT</constant>
- . See
+ <constant>EventBufferEvent::TIMEOUT</constant>.
+ See
<link linkend="eventbufferevent.constants">EventBufferEvent constants</link>
</para>
</listitem>
@@ -129,10 +125,9 @@
<listitem>
<para>
Custom variable attached to all callbacks via
- <methodname>EventBufferEvent::__construct</methodname>
- , or
- <methodname>EventBufferEvent::setCallbacks</methodname>
- .
+ <methodname>EventBufferEvent::__construct</methodname>,
+ or
+ <methodname>EventBufferEvent::setCallbacks</methodname>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbufferevent.xml b/reference/event/eventbufferevent.xml
index 1bf2687ee029..02696f7f462c 100644
--- a/reference/event/eventbufferevent.xml
+++ b/reference/event/eventbufferevent.xml
@@ -205,8 +205,7 @@
<listitem>
<para>
Underlying input buffer object(
- <classname>EventBuffer</classname>
- )
+ <classname>EventBuffer</classname>)
</para>
</listitem>
</varlistentry>
@@ -217,8 +216,7 @@
<listitem>
<para>
Underlying output buffer object(
- <classname>EventBuffer</classname>
- )
+ <classname>EventBuffer</classname>)
</para>
</listitem>
</varlistentry>
@@ -271,8 +269,7 @@
on what the error was, call
<methodname>EventUtil::getLastSocketErrno</methodname>
and/or
- <methodname>EventUtil::getLastSocketError</methodname>
- .
+ <methodname>EventUtil::getLastSocketError</methodname>.
</para>
</listitem>
</varlistentry>
@@ -325,8 +322,7 @@
When this flag is set, the bufferevent defers all of its callbacks. See
<link
xlink:href="http://www.wangafu.net/~nickm/libevent-book/Ref6_bufferevent.html#_deferred_callbacks">Fast
- portable non-blocking network programming with Libevent, Deferred callbacks</link>
- .
+ portable non-blocking network programming with Libevent, Deferred callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbufferevent/connecthost.xml b/reference/event/eventbufferevent/connecthost.xml
index 524f6c32fc3b..fd66d41894d6 100644
--- a/reference/event/eventbufferevent/connecthost.xml
+++ b/reference/event/eventbufferevent/connecthost.xml
@@ -44,8 +44,8 @@
<para>
<parameter>dns_base</parameter>
is optional. May be &null;, or an object created with
- <methodname>EventDnsBase::__construct</methodname>
- . For asyncronous hostname resolving pass a valid event dns base resource.
+ <methodname>EventDnsBase::__construct</methodname>.
+ For asyncronous hostname resolving pass a valid event dns base resource.
Otherwise the hostname resolving will block.
</para>
<note>
@@ -121,14 +121,12 @@
<listitem>
<para>
Address family.
- <constant>EventUtil::AF_UNSPEC</constant>
- ,
- <constant>EventUtil::AF_INET</constant>
- , or
- <constant>EventUtil::AF_INET6</constant>
- . See
- <link linkend="eventutil.constants">EventUtil constants</link>
- .
+ <constant>EventUtil::AF_UNSPEC</constant>,
+ <constant>EventUtil::AF_INET</constant>,
+ or
+ <constant>EventUtil::AF_INET6</constant>.
+ See
+ <link linkend="eventutil.constants">EventUtil constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbufferevent/construct.xml b/reference/event/eventbufferevent/construct.xml
index 7205d5de42e5..ee70597f2857 100644
--- a/reference/event/eventbufferevent/construct.xml
+++ b/reference/event/eventbufferevent/construct.xml
@@ -56,8 +56,7 @@
&null; to
<parameter>socket</parameter>
means that the socket should be created later, e.g. by means of
- <methodname>EventBufferEvent::connect</methodname>
- .
+ <methodname>EventBufferEvent::connect</methodname>.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -93,10 +92,9 @@
<para>
One of
<link linkend="eventbufferevent.constants">EventBufferEvent::OPT_*
- constants</link>
- , or
- <literal>0</literal>
- .
+ constants</link>,
+ or
+ <literal>0</literal>.
</para>
</listitem>
</varlistentry>
@@ -108,8 +106,7 @@
<para>
Read event callback. See
<link linkend="eventbufferevent.about.callbacks">About buffer event
- callbacks</link>
- .
+ callbacks</link>.
</para>
</listitem>
</varlistentry>
@@ -121,8 +118,7 @@
<para>
Write event callback. See
<link linkend="eventbufferevent.about.callbacks">About buffer event
- callbacks</link>
- .
+ callbacks</link>.
</para>
</listitem>
</varlistentry>
@@ -134,8 +130,7 @@
<para>
Status-change event callback. See
<link linkend="eventbufferevent.about.callbacks">About buffer event
- callbacks</link>
- .
+ callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbufferevent/createpair.xml b/reference/event/eventbufferevent/createpair.xml
index e57952806f0b..4cf6a24bb406 100644
--- a/reference/event/eventbufferevent/createpair.xml
+++ b/reference/event/eventbufferevent/createpair.xml
@@ -28,10 +28,10 @@
<classname>EventBufferEvent</classname>
objects connected to each other. All the usual options are supported,
except for
- <constant>EventBufferEvent::OPT_CLOSE_ON_FREE</constant>
- , which has no effect, and
- <constant>EventBufferEvent::OPT_DEFER_CALLBACKS</constant>
- , which is always on.
+ <constant>EventBufferEvent::OPT_CLOSE_ON_FREE</constant>,
+ which has no effect, and
+ <constant>EventBufferEvent::OPT_DEFER_CALLBACKS</constant>,
+ which is always on.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/event/eventbufferevent/disable.xml b/reference/event/eventbufferevent/disable.xml
index 0b95587767d7..b7b50dbc842d 100644
--- a/reference/event/eventbufferevent/disable.xml
+++ b/reference/event/eventbufferevent/disable.xml
@@ -18,10 +18,9 @@
</methodsynopsis>
<para>
Disable events
- <constant>Event::READ</constant>
- ,
- <constant>Event::WRITE</constant>
- , or
+ <constant>Event::READ</constant>,
+ <constant>Event::WRITE</constant>,
+ or
<constant>Event::READ</constant>
<literal>|</literal>
<constant>Event::WRITE</constant>
diff --git a/reference/event/eventbufferevent/enable.xml b/reference/event/eventbufferevent/enable.xml
index 515db6b2fe41..26bc794ce813 100644
--- a/reference/event/eventbufferevent/enable.xml
+++ b/reference/event/eventbufferevent/enable.xml
@@ -18,10 +18,9 @@
</methodsynopsis>
<para>
Enable events
- <constant>Event::READ</constant>
- ,
- <constant>Event::WRITE</constant>
- , or
+ <constant>Event::READ</constant>,
+ <constant>Event::WRITE</constant>,
+ or
<constant>Event::READ</constant>
<literal>|</literal>
<constant>Event::WRITE</constant>
@@ -37,10 +36,9 @@
</term>
<listitem>
<para>
- <constant>Event::READ</constant>
- ,
- <constant>Event::WRITE</constant>
- , or
+ <constant>Event::READ</constant>,
+ <constant>Event::WRITE</constant>,
+ or
<constant>Event::READ</constant>
<literal>|</literal>
<constant>Event::WRITE</constant>
diff --git a/reference/event/eventbufferevent/free.xml b/reference/event/eventbufferevent/free.xml
index 740e5af2e932..8462ca361c68 100644
--- a/reference/event/eventbufferevent/free.xml
+++ b/reference/event/eventbufferevent/free.xml
@@ -23,8 +23,7 @@
where we need to free resources as soon as possible. In such cases
<methodname>EventBufferEvent::free</methodname>
may be used to protect the script against running up to the
- <literal>memory_limit</literal>
- .
+ <literal>memory_limit</literal>.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/event/eventbufferevent/getdnserrorstring.xml b/reference/event/eventbufferevent/getdnserrorstring.xml
index 844b2f06ab87..31737418fc51 100644
--- a/reference/event/eventbufferevent/getdnserrorstring.xml
+++ b/reference/event/eventbufferevent/getdnserrorstring.xml
@@ -15,8 +15,8 @@
</methodsynopsis>
<para>
Returns string describing the last failed DNS lookup attempt made by
- <methodname>EventBufferEvent::connectHost</methodname>
- , or an empty string, if there is no DNS error detected.
+ <methodname>EventBufferEvent::connectHost</methodname>,
+ or an empty string, if there is no DNS error detected.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/event/eventbufferevent/readbuffer.xml b/reference/event/eventbufferevent/readbuffer.xml
index c11a91fd6d43..c93ed8d1d96f 100644
--- a/reference/event/eventbufferevent/readbuffer.xml
+++ b/reference/event/eventbufferevent/readbuffer.xml
@@ -18,8 +18,7 @@
</methodsynopsis>
<para>
Drains the entire contents of the input buffer and places them into
- <parameter>buf</parameter>
- .
+ <parameter>buf</parameter>.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/event/eventbufferevent/setcallbacks.xml b/reference/event/eventbufferevent/setcallbacks.xml
index a40eb1ac55cd..18ab8b5428d5 100644
--- a/reference/event/eventbufferevent/setcallbacks.xml
+++ b/reference/event/eventbufferevent/setcallbacks.xml
@@ -43,8 +43,7 @@
<para>
Read event callback. See
<link linkend="eventbufferevent.about.callbacks">About buffer event
- callbacks</link>
- .
+ callbacks</link>.
</para>
</listitem>
</varlistentry>
@@ -56,8 +55,7 @@
<para>
Write event callback. See
<link linkend="eventbufferevent.about.callbacks">About buffer event
- callbacks</link>
- .
+ callbacks</link>.
</para>
</listitem>
</varlistentry>
@@ -69,8 +67,7 @@
<para>
Status-change event callback. See
<link linkend="eventbufferevent.about.callbacks">About buffer event
- callbacks</link>
- .
+ callbacks</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbufferevent/setwatermark.xml b/reference/event/eventbufferevent/setwatermark.xml
index f21b72b0df1f..591b292bad6d 100644
--- a/reference/event/eventbufferevent/setwatermark.xml
+++ b/reference/event/eventbufferevent/setwatermark.xml
@@ -26,8 +26,8 @@
</methodsynopsis>
<para>
Adjusts the read watermarks, the write
- <emphasis>watermarks</emphasis>
- , or both, of a single buffer event.
+ <emphasis>watermarks</emphasis>,
+ or both, of a single buffer event.
</para>
<para>
A buffer event watermark is an edge, a value specifying number of bytes to
@@ -48,10 +48,9 @@
<listitem>
<para>
Bitmask of
- <constant>Event::READ</constant>
- ,
- <constant>Event::WRITE</constant>
- , or both.
+ <constant>Event::READ</constant>,
+ <constant>Event::WRITE</constant>,
+ or both.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbufferevent/sslfilter.xml b/reference/event/eventbufferevent/sslfilter.xml
index 7e3ab034f028..a556e6f13bf5 100644
--- a/reference/event/eventbufferevent/sslfilter.xml
+++ b/reference/event/eventbufferevent/sslfilter.xml
@@ -89,12 +89,10 @@ xmlns:xi="http://www.w3.org/2001/XInclude">
<listitem>
<para>
The current state of SSL connection:
- <constant>EventBufferEvent::SSL_OPEN</constant>
- ,
+ <constant>EventBufferEvent::SSL_OPEN</constant>,
<constant>EventBufferEvent::SSL_ACCEPTING</constant>
or
- <constant>EventBufferEvent::SSL_CONNECTING</constant>
- .
+ <constant>EventBufferEvent::SSL_CONNECTING</constant>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventbufferevent/sslsocket.xml b/reference/event/eventbufferevent/sslsocket.xml
index 7f21fcacc4e9..6e54086a6d97 100644
--- a/reference/event/eventbufferevent/sslsocket.xml
+++ b/reference/event/eventbufferevent/sslsocket.xml
@@ -85,12 +85,10 @@
<listitem>
<para>
The current state of SSL connection:
- <constant>EventBufferEvent::SSL_OPEN</constant>
- ,
+ <constant>EventBufferEvent::SSL_OPEN</constant>,
<constant>EventBufferEvent::SSL_ACCEPTING</constant>
or
- <constant>EventBufferEvent::SSL_CONNECTING</constant>
- .
+ <constant>EventBufferEvent::SSL_CONNECTING</constant>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventconfig.xml b/reference/event/eventconfig.xml
index 49da91b4c07b..12f4f566ac9f 100644
--- a/reference/event/eventconfig.xml
+++ b/reference/event/eventconfig.xml
@@ -10,8 +10,7 @@
<para>
Represents configuration structure which could be used in construction of
the
- <classname>EventBase</classname>
- .
+ <classname>EventBase</classname>.
</para>
</section>
<!-- }}} -->
diff --git a/reference/event/eventconfig/avoidmethod.xml b/reference/event/eventconfig/avoidmethod.xml
index 4566e41a8804..94ae9e10952a 100644
--- a/reference/event/eventconfig/avoidmethod.xml
+++ b/reference/event/eventconfig/avoidmethod.xml
@@ -20,8 +20,7 @@
Tells libevent to avoid specific event method(backend). See
<link
xlink:href="http://www.wangafu.net/~nickm/libevent-book/Ref2_eventbase.html#_creating_an_event_base">Creating
- an event base</link>
- .
+ an event base</link>.
</para>
</refsect1>
<refsect1 role="parameters">
@@ -35,8 +34,7 @@
<para>
The backend method to avoid. See
<link
- linkend="eventconfig.constants">EventConfig constants</link>
- .
+ linkend="eventconfig.constants">EventConfig constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventconfig/setmaxdispatchinterval.xml b/reference/event/eventconfig/setmaxdispatchinterval.xml
index 35e72cc3a8b1..34826bb1b65d 100644
--- a/reference/event/eventconfig/setmaxdispatchinterval.xml
+++ b/reference/event/eventconfig/setmaxdispatchinterval.xml
@@ -31,8 +31,7 @@
<note>
<para>
Available since
- <literal>libevent 2.1.0-alpha</literal>
- .
+ <literal>libevent 2.1.0-alpha</literal>.
</para>
</note>
</refsect1>
@@ -47,8 +46,8 @@
<para>
An interval after which Libevent should stop running callbacks and check
for more events, or
- <literal>0</literal>
- , if there should be no such interval.
+ <literal>0</literal>,
+ if there should be no such interval.
</para>
</listitem>
</varlistentry>
@@ -60,8 +59,8 @@
<para>
A number of callbacks after which Libevent should stop running callbacks
and check for more events, or
- <constant>-1</constant>
- , if there should be no such limit.
+ <constant>-1</constant>,
+ if there should be no such limit.
</para>
</listitem>
</varlistentry>
@@ -76,10 +75,10 @@
and
<parameter>max_callbacks</parameter>
should not be enforced. If this is set to
- <literal>0</literal>
- , they are enforced for events of every priority; if it's set to
- <literal>1</literal>
- , they're enforced for events of priority
+ <literal>0</literal>,
+ they are enforced for events of every priority; if it's set to
+ <literal>1</literal>,
+ they're enforced for events of priority
<literal>1</literal>
and above, and so on.
</para>
diff --git a/reference/event/eventdnsbase/loadhosts.xml b/reference/event/eventdnsbase/loadhosts.xml
index 008e56d333cd..50d906612505 100644
--- a/reference/event/eventdnsbase/loadhosts.xml
+++ b/reference/event/eventdnsbase/loadhosts.xml
@@ -18,8 +18,8 @@
</methodsynopsis>
<para>
Loads a hosts file (in the same format as
- <literal>/etc/hosts</literal>
- ) from hosts file.
+ <literal>/etc/hosts</literal>)
+ from hosts file.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/event/eventdnsbase/parseresolvconf.xml b/reference/event/eventdnsbase/parseresolvconf.xml
index 028022bbc01f..6deeb787b7bc 100644
--- a/reference/event/eventdnsbase/parseresolvconf.xml
+++ b/reference/event/eventdnsbase/parseresolvconf.xml
@@ -42,8 +42,7 @@
</para>
<para>
The following directives are not parsed from the file:
- <literal>sortlist, rotate, no-check-names, inet6, debug</literal>
- .
+ <literal>sortlist, rotate, no-check-names, inet6, debug</literal>.
</para>
<para>
If this function encounters an error, the possible return values are:
diff --git a/reference/event/eventdnsbase/setoption.xml b/reference/event/eventdnsbase/setoption.xml
index 9502a3be4ee7..b49d8611626d 100644
--- a/reference/event/eventdnsbase/setoption.xml
+++ b/reference/event/eventdnsbase/setoption.xml
@@ -34,16 +34,12 @@
<listitem>
<para>
The currently available configuration options are:
- <literal>"ndots"</literal>
- ,
- <literal>"timeout"</literal>
- ,
- <literal>"max-timeouts"</literal>
- ,
- <literal>"max-inflight"</literal>
- , and
- <literal>"attempts"</literal>
- .
+ <literal>"ndots"</literal>,
+ <literal>"timeout"</literal>,
+ <literal>"max-timeouts"</literal>,
+ <literal>"max-inflight"</literal>,
+ and
+ <literal>"attempts"</literal>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventhttp/accept.xml b/reference/event/eventhttp/accept.xml
index 0c0195da3d2e..3d3c01776515 100644
--- a/reference/event/eventhttp/accept.xml
+++ b/reference/event/eventhttp/accept.xml
@@ -26,13 +26,12 @@
<note>
<para>
To bind a socket,
- <literal>listen</literal>
- , and
+ <literal>listen</literal>,
+ and
<literal>
accept</literal>
connections on the socket in s single call use
- <methodname>EventHttp::bind</methodname>
- .
+ <methodname>EventHttp::bind</methodname>.
<methodname>EventHttp::accept</methodname>
is needed only if one already has a socket ready to accept connections.
</para>
diff --git a/reference/event/eventhttp/setallowedmethods.xml b/reference/event/eventhttp/setallowedmethods.xml
index 2307fdc00a7d..7b33d810cf5d 100644
--- a/reference/event/eventhttp/setallowedmethods.xml
+++ b/reference/event/eventhttp/setallowedmethods.xml
@@ -28,16 +28,12 @@
</para>
<para>
By default this includes the following methods:
- <literal>GET</literal>
- ,
- <literal>POST</literal>
- ,
- <literal>HEAD</literal>
- ,
- <literal>PUT</literal>
- ,
- <literal>DELETE</literal>
- . See
+ <literal>GET</literal>,
+ <literal>POST</literal>,
+ <literal>HEAD</literal>,
+ <literal>PUT</literal>,
+ <literal>DELETE</literal>.
+ See
<literal>EventHttpRequest::CMD_*</literal>
constants.
</para>
@@ -55,8 +51,7 @@
<link
linkend="eventhttprequest.constants">
<literal>EventHttpRequest::CMD_*</literal>
- constants</link>
- .
+ constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventhttp/setcallback.xml b/reference/event/eventhttp/setcallback.xml
index 5bb97465edf0..7e69432c6d1f 100644
--- a/reference/event/eventhttp/setcallback.xml
+++ b/reference/event/eventhttp/setcallback.xml
@@ -50,8 +50,8 @@
The callback
<type>callable</type>
that gets invoked on requested
- <parameter>path</parameter>
- . It should match the following prototype:
+ <parameter>path</parameter>.
+ It should match the following prototype:
</para>
<methodsynopsis>
<type>void</type>
diff --git a/reference/event/eventhttp/setdefaultcallback.xml b/reference/event/eventhttp/setdefaultcallback.xml
index 031f3e84de26..3b65085a73fe 100644
--- a/reference/event/eventhttp/setdefaultcallback.xml
+++ b/reference/event/eventhttp/setdefaultcallback.xml
@@ -35,8 +35,8 @@
<listitem>
<para>
The callback
- <type>callable</type>
- . It should match the following prototype:
+ <type>callable</type>.
+ It should match the following prototype:
</para>
<methodsynopsis>
<type>void</type>
diff --git a/reference/event/eventhttpconnection/makerequest.xml b/reference/event/eventhttpconnection/makerequest.xml
index f6fb05bc857e..31748c8a2889 100644
--- a/reference/event/eventhttpconnection/makerequest.xml
+++ b/reference/event/eventhttpconnection/makerequest.xml
@@ -53,8 +53,7 @@
<para>
One of
<link linkend="eventhttprequest.constants">
- <literal>EventHttpRequest::CMD_*</literal> constants</link>
- .
+ <literal>EventHttpRequest::CMD_*</literal> constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventhttprequest/addheader.xml b/reference/event/eventhttprequest/addheader.xml
index 7a46aefc9037..87ab25beb537 100644
--- a/reference/event/eventhttprequest/addheader.xml
+++ b/reference/event/eventhttprequest/addheader.xml
@@ -59,8 +59,7 @@
<para>
One of
<link linkend="eventhttprequest.constants">
- <literal>EventHttpRequest::*_HEADER</literal> constants</link>
- .
+ <literal>EventHttpRequest::*_HEADER</literal> constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventhttprequest/findheader.xml b/reference/event/eventhttprequest/findheader.xml
index 983df9a08d9d..e8aba005eb68 100644
--- a/reference/event/eventhttprequest/findheader.xml
+++ b/reference/event/eventhttprequest/findheader.xml
@@ -45,8 +45,7 @@
<para>
One of
<link linkend="eventhttprequest.constants">
- <literal>EventHttpRequest::*_HEADER</literal> constants</link>
- .
+ <literal>EventHttpRequest::*_HEADER</literal> constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventhttprequest/getconnection.xml b/reference/event/eventhttprequest/getconnection.xml
index ac21b9265411..550a54c55990 100644
--- a/reference/event/eventhttprequest/getconnection.xml
+++ b/reference/event/eventhttprequest/getconnection.xml
@@ -24,8 +24,8 @@
connection. Therefore we can't unambiguously associate
<classname>EventHttpRequest</classname>
with
- <classname>EventHttpConnection</classname>
- . Thus, we construct
+ <classname>EventHttpConnection</classname>.
+ Thus, we construct
<classname>EventHttpConnection</classname>
object on-the-fly. Having no information about the event base, DNS base
and connection-close callback, we just leave these fields unset.
@@ -35,8 +35,7 @@
<methodname>EventHttpRequest::getConnection</methodname>
method is usually useful when we need to set up a callback on connection
close. See
- <methodname>EventHttpConnection::setCloseCallback</methodname>
- .
+ <methodname>EventHttpConnection::setCloseCallback</methodname>.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/event/eventhttprequest/sendreplystart.xml b/reference/event/eventhttprequest/sendreplystart.xml
index e0a8f50f177a..76bd61796a5f 100644
--- a/reference/event/eventhttprequest/sendreplystart.xml
+++ b/reference/event/eventhttprequest/sendreplystart.xml
@@ -23,8 +23,7 @@
<para>
Initiate a reply that uses
<literal>Transfer-Encoding</literal>
- <literal>chunked</literal>
- .
+ <literal>chunked</literal>.
</para>
<para>
This allows the caller to stream the reply back to the client and is useful
@@ -35,8 +34,7 @@
The caller needs to supply data chunks with
<methodname>EventHttpRequest::sendReplyChunk</methodname>
and complete the reply by calling
- <methodname>EventHttpRequest::sendReplyEnd</methodname>
- .
+ <methodname>EventHttpRequest::sendReplyEnd</methodname>.
</para>
</refsect1>
<refsect1 role="parameters">
diff --git a/reference/event/eventlistener/construct.xml b/reference/event/eventlistener/construct.xml
index 49e860650196..8e6a859a85aa 100644
--- a/reference/event/eventlistener/construct.xml
+++ b/reference/event/eventlistener/construct.xml
@@ -71,8 +71,7 @@
<listitem>
<para>
Custom user data attached to
- <parameter>cb</parameter>
- .
+ <parameter>cb</parameter>.
</para>
</listitem>
</varlistentry>
@@ -85,8 +84,7 @@
Bit mask of
<literal>EventListener::OPT_*</literal>
constants. See
- <link linkend="eventlistener.constants">EventListener constants</link>
- .
+ <link linkend="eventlistener.constants">EventListener constants</link>.
</para>
</listitem>
</varlistentry>
@@ -121,10 +119,9 @@
<parameter>target</parameter>
is a string, the string will be parsed as network address. It will be
interpreted as a UNIX domain socket path, if prefixed with
- <literal>'unix:'</literal>
- , e.g.
- <literal>'unix:/tmp/my.sock'</literal>
- .
+ <literal>'unix:'</literal>,
+ e.g.
+ <literal>'unix:/tmp/my.sock'</literal>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventsslcontext.xml b/reference/event/eventsslcontext.xml
index 08f9d82607e0..846b048bb0b0 100644
--- a/reference/event/eventsslcontext.xml
+++ b/reference/event/eventsslcontext.xml
@@ -285,8 +285,8 @@
<listitem>
<para>
Key for an item of the options' array used in
- <methodname>EventSslContext::__construct</methodname>
- . The option points to path of local certificate.
+ <methodname>EventSslContext::__construct</methodname>.
+ The option points to path of local certificate.
</para>
</listitem>
</varlistentry>
@@ -297,8 +297,8 @@
<listitem>
<para>
Key for an item of the options' array used in
- <methodname>EventSslContext::__construct</methodname>
- . The option points to path of the private key.
+ <methodname>EventSslContext::__construct</methodname>.
+ The option points to path of the private key.
</para>
</listitem>
</varlistentry>
@@ -309,8 +309,8 @@
<listitem>
<para>
Key for an item of the options' array used in
- <methodname>EventSslContext::__construct</methodname>
- . Represents passphrase of the certificate.
+ <methodname>EventSslContext::__construct</methodname>.
+ Represents passphrase of the certificate.
</para>
</listitem>
</varlistentry>
@@ -321,8 +321,8 @@
<listitem>
<para>
Key for an item of the options' array used in
- <methodname>EventSslContext::__construct</methodname>
- . Represents path of the certificate authority file.
+ <methodname>EventSslContext::__construct</methodname>.
+ Represents path of the certificate authority file.
</para>
</listitem>
</varlistentry>
@@ -333,8 +333,8 @@
<listitem>
<para>
Key for an item of the options' array used in
- <methodname>EventSslContext::__construct</methodname>
- . Represents path where the certificate authority file should be
+ <methodname>EventSslContext::__construct</methodname>.
+ Represents path where the certificate authority file should be
searched for.
</para>
</listitem>
@@ -346,8 +346,8 @@
<listitem>
<para>
Key for an item of the options' array used in
- <methodname>EventSslContext::__construct</methodname>
- . Represents option that allows self-signed certificates.
+ <methodname>EventSslContext::__construct</methodname>.
+ Represents option that allows self-signed certificates.
</para>
</listitem>
</varlistentry>
@@ -358,8 +358,8 @@
<listitem>
<para>
Key for an item of the options' array used in
- <methodname>EventSslContext::__construct</methodname>
- . Represents option that tells Event to verify peer.
+ <methodname>EventSslContext::__construct</methodname>.
+ Represents option that tells Event to verify peer.
</para>
</listitem>
</varlistentry>
@@ -370,8 +370,8 @@
<listitem>
<para>
Key for an item of the options' array used in
- <methodname>EventSslContext::__construct</methodname>
- . Represents maximum depth for the certificate chain verification that
+ <methodname>EventSslContext::__construct</methodname>.
+ Represents maximum depth for the certificate chain verification that
shall be allowed for the SSL context.
</para>
</listitem>
@@ -383,8 +383,8 @@
<listitem>
<para>
Key for an item of the options' array used in
- <methodname>EventSslContext::__construct</methodname>
- . Represents the cipher list for the SSL context.
+ <methodname>EventSslContext::__construct</methodname>.
+ Represents the cipher list for the SSL context.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventsslcontext/construct.xml b/reference/event/eventsslcontext/construct.xml
index bf22bde55d38..673c625256a5 100644
--- a/reference/event/eventsslcontext/construct.xml
+++ b/reference/event/eventsslcontext/construct.xml
@@ -36,8 +36,7 @@
<para>
One of
<link linkend="eventsslcontext.constants">
- <literal>EventSslContext::*_METHOD</literal> constants</link>
- .
+ <literal>EventSslContext::*_METHOD</literal> constants</link>.
</para>
</listitem>
</varlistentry>
@@ -50,8 +49,7 @@
Associative array of SSL context options One of
<link
linkend="eventsslcontext.constants">
- <literal>EventSslContext::OPT_*</literal> constants</link>
- .
+ <literal>EventSslContext::OPT_*</literal> constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventutil.xml b/reference/event/eventutil.xml
index 5c3bc6fe1bf9..2772b89b64e4 100644
--- a/reference/event/eventutil.xml
+++ b/reference/event/eventutil.xml
@@ -223,8 +223,8 @@
the
<literal>CAP_NET_ADMIN</literal>
capability or an effective user ID of
- <literal>0</literal>
- . (Added in event-1.6.0.)
+ <literal>0</literal>.
+ (Added in event-1.6.0.)
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/eventutil/setsocketoption.xml b/reference/event/eventutil/setsocketoption.xml
index aca1846d2a57..795aee7f42b7 100644
--- a/reference/event/eventutil/setsocketoption.xml
+++ b/reference/event/eventutil/setsocketoption.xml
@@ -65,8 +65,7 @@
the
<function>getprotobyname</function>
function. See
- <link linkend="eventutil.constants">EventUtil constants</link>
- .
+ <link linkend="eventutil.constants">EventUtil constants</link>.
</para>
</listitem>
</varlistentry>
@@ -79,8 +78,7 @@
Option name(type). Has the same meaning as corresponding parameter of
<function>socket_get_option</function>
function. See
- <link linkend="eventutil.constants">EventUtil constants</link>
- .
+ <link linkend="eventutil.constants">EventUtil constants</link>.
</para>
</listitem>
</varlistentry>
diff --git a/reference/event/setup.xml b/reference/event/setup.xml
index 4eaa5ddb6531..edeea97f7821 100644
--- a/reference/event/setup.xml
+++ b/reference/event/setup.xml
@@ -25,8 +25,7 @@
</para>
<para>
&pecl.info;
- <link xlink:href="&url.pecl.package;event">&url.pecl.package;event</link>
- .
+ <link xlink:href="&url.pecl.package;event">&url.pecl.package;event</link>.
</para>
</section>
</chapter>
diff --git a/reference/parle/pattern.matching.xml b/reference/parle/pattern.matching.xml
index 3ef582dd41bd..bef88be5c21b 100644
--- a/reference/parle/pattern.matching.xml
+++ b/reference/parle/pattern.matching.xml
@@ -18,8 +18,7 @@
<member><literal>[:space:]</literal></member>
<member><literal>[:upper:]</literal></member>
<member><literal>[:xdigit:]</literal></member>
- </simplelist>
- .
+ </simplelist>.
</para>
<para>
The Unicode character classes are currently not enabled by default, pass --enable-parle-utf32 to make them available.