Re: Moodle Problem with libgd compiled.

tks Christoph, my moodle its work.
I not used path, but i used only setting "--with-gd" after installing libs
with apt-get install.
Regards ,

2017-01-09 16:25 GMT-02:00 Christoph M. Becker <[email protected]>:

> On 09.01.2017 at 19:19, Rodrigo Cunha wrote:
>
> > tks Christoph, my moodle its work.
> > I not used path, but i used only setting "--with-gd" after installing
> libs
> > with apt-get install.
> > Regards ,
>
> Great!
>
> Please reply to all next time – other readers may be interested in the
> discussion.
>
> Cheers,
> Christoph
>
> > 2017-01-09 14:54 GMT-02:00 Christoph M. Becker <[email protected]>:
> >
> >> On 09.01.2017 at 16:57, Rodrigo Cunha wrote:
> >>
> >>> Tks Christoph.
> >>> Feedback for this:
> >>>
> >>> I install this package and change the path for "with-gd" tp /usr
> >>> "--with-gd=/usr/", remove settings "--with-jpeg-dir" and
> >> "--with-jpeg-dir"
> >>> but not work for this.
> >>> I search in google for stdout "png.h" and find website :
> >>> http://zgadzaj.com/how-to-install-php-53-and-52-
> together-on-ubuntu-1204
> >>> and for this error, the website recomend installing
> >>> sudo apt-get install libgd2-xpm-dev and set /usr
> >>> but not found too.I try this solution but the make step displayed
> error:
> >>>
> >>> //usr/lib/x86_64-linux-gnu/libXpm.so.4: error adding symbols: DSO
> >> missing
> >>> from command line
> >>> collect2: error: ld returned 1 exit status
> >>> Makefile:261: recipe for target 'sapi/cli/php' failed
> >>> make: *** [sapi/cli/php] Error 1
> >>
> >> If you're building PHP yourself, I suggest to build it with the bundled
> >> libgd, and only to include support for the image formats that are
> >> needed.  In the simplest case you just do
> >>
> >>   ./configure … --with-gd
> >>
> >> That requires to have libpng-dev installed.  If you also need JPEG
> >> support, you have to install something like libjpeg-dev and do
> >>
> >>   ./configure … --with-gd --with-jpeg-dir
> >>
> >> Perhaps you have to explicitly specify the path to where libjpeg is
> >> installed, but at least on my Debian Jessie that's not necessary.
> >>
> >> Cheers,
> >> Christoph
> >>
> >>> 2017-01-09 12:26 GMT-02:00 Christoph M. Becker <[email protected]>:
> >>>
> >>>> On 09.01.2017 at 04:16, Rodrigo Cunha wrote:
> >>>>
> >>>>> i make lib-gd with option(./configure) "--with-gd" but not work. I
> >>>> Download
> >>>>> the lib in website and compile this, but
> >>>>>
> >>>>> my ./configure php displayed a stdout:
> >>>>>
> >>>>> "
> >>>>>
> >>>>> If configure fails try --with-vpx-dir=<DIR>
> >>>>>
> >>>>> If configure fails try --with-jpeg-dir=<DIR>
> >>>>>
> >>>>> configure: error: png.h not found.ls
> >>>>
> >>>> Apparently, libpng is not installed.  You can install it with
> >>>>
> >>>>   apt-get install libpng-dev
> >>>>
> >>>>> I installing the lib-gd with command
> >>>>>
> >>>>> #apt-get install php5-gd
> >>>>>
> >>>>> but i the new configure setting not work to.I find the lib installing
> >> in
> >>>> my
> >>>>> environment and
> >>>>>
> >>>>> the lib found in path:/usr/lib/x86_64-linux-gnu/.
> >>>>>
> >>>>> I want installing this lib easyli with command apt-get and setting
> the
> >>>>> ../configure setting with path for this.
> >>>>>
> >>>>> My configure:
> >>>>>
> >>>>> --with-gd=/usr/lib/x86_64-linux-gnu/
> >>>>> --with-jpeg-dir=/usr/lib/x86_64-linux-gnu/
> >>>>> --with-vpx-dir=/usr/lib/x86_64-linux-gnu/
> >>>>
> >>>> That can't work, because the DIR has to contain the library as well as
> >>>> the headers.  Try
> >>>>
> >>>>   --with-gd=/usr
> >>>>
> >>>> You don't need the other config options (--with-jpeg-dir,
> >>>> --with-vpx-dir) if you're building against an external libgd, by the
> >> way.
> >>>>
> >>>> --
> >>>> Christoph M. Becker
> >>>>
> >>>>
> >>>
> >>>
> >>
> >
> >
> >
>



-- 
Atenciosamente,
Rodrigo da Silva Cunha
São Gonçalo, RJ - Brasil