Re: [PHP-INSTALL] error instant client PHP configure script

Hi again
One Question i downloaded again the file zip and now I can run the configure
without errors. =)

But when I run "make test" I receive this error

make test
+-----------------------------------------------------------+
|                       ! ERROR !                           |
| The test-suite requires that proc_open() is available.    |
| Please check if you disabled it in php.ini.               |
+-----------------------------------------------------------+

I the first time the I install php in this server, and I dont have the
php.ini in the /usr/local/php/etc/
Is this normal? I think this is ok, I never will can, do this test because
this condition.

Then "I did make install"
Please confirm this error, if is normal.

Thanks
--
Angel

2010/3/8 Angel Motta <[email protected]>

> Ohhh Christopher
> I think you have the reason. When I was trying to unzipping again I see
> this:
> [root@zimbra instantclient]# unzip
> instantclient-basic-linux32-11.2.0.1.zip
> Archive:  instantclient-basic-linux32-11.2.0.1.zip
>   inflating: instantclient_11_2/adrci
>   inflating: instantclient_11_2/BASIC_README
>   inflating: instantclient_11_2/genezi
> *  inflating: instantclient_11_2/libclntsh.so.11.1   bad CRC 05bc2fea
> (should be 1621b100)*
>   inflating: instantclient_11_2/libnnz11.so
>   inflating: instantclient_11_2/libocci.so.11.1
>   inflating: instantclient_11_2/libociei.so
>   inflating: instantclient_11_2/libocijdbc11.so
>   inflating: instantclient_11_2/ojdbc5.jar
>   inflating: instantclient_11_2/ojdbc6.jar
>   inflating: instantclient_11_2/xstreams.jar
>
> I think the zip file is corrupted. I am downloading this file again.
> I will post the results of this.
>
> --
> Angel
>
> 2010/3/8 Christopher Jones <[email protected]>
>
>>
>> The error "/opt/instantclient/libclntsh.so: file not recognized: File
>> format not recognized" still makes me think there is an installation
>> issue.
>>
>> Make the libclntsh symbolic link points to the right file. See
>> http://www.oracle.com/technology/pub/notes/technote_php_instant.html
>> And/or try unzipping the 32 bit package again
>>
>> I just built PHP 5.2.13 on Oracle EL 5.4 using effectively the same
>> options as you.  It built OK.  My configure line was:
>>
>> ./configure --prefix=$HOME/phptmp --with-xmlrpc
>> --with-apxs2=$HOME/apache22/bin/apxs  --with-gd=/usr/ --with-jpeg-dir=/usr
>> --with-png-dir=/usr --with-freetype-dir=/usr --with-xpm-dir=/usr
>> --with-zlib=/usr --with-oci8=instantclient,$HOME/instantclient_11_2
>> --with-pdo-oci=instantclient,$HOME/instantclient_11_2,11.2 --with-snmp=/usr/
>> --with-openssl-dir=/usr --with-iconv --with-curl=/usr --with-curlwrappers
>> --with-libxml-dir=/usr --with-gettext=/usr --enable-sigchild --enable-libxml
>> --enable-soap
>>
>> Chris
>>
>>
>> Angel Motta wrote:
>> > Sorry for send twice.
>> > I forgot php version and apache
>> > php-5.2.8
>> > apache: httpd-2.2.12
>> >
>> > 2010/3/8 Angel Motta <[email protected] <mailto:[email protected]
>> >>
>>
>> >
>> >     Hi Christopher and Thanks for your assistance
>> >
>> >     I am using:
>> >     RHEL 5.3 - 32bit platform
>> >     instantclient-basic-linux32-11.2.0.1.zip
>> >     instantclient-sdk-linux32-11.2.0.1.zip
>> >
>> >     I want to install oci8 support with snmp. When I enable snmp-support
>> >     (that is my objective) in the configure I get this error:
>> >
>> >     ./configure --prefix=/usr/local/php --with-xmlrpc
>> >     --with-apxs2=/usr/local/apache2/bin/apxs
>> >     --with-config-file-path=/usr/local/php/etc --with-gd=/usr/
>> >     --with-jpeg-dir=/usr --with-png-dir=/usr --with-freetype-dir=/usr
>> >     --with-xpm-dir=/usr --with-zlib=/usr
>> >     --with-oci8=instantclient,/opt/instantclient
>> >     --with-pdo-oci=instantclient,/opt/instantclient,11.1
>> >     --with-snmp=/usr/ --with-openssl-dir=/usr
>> >     --with-iconv=/usr/local/lib --with-curl=/usr --with-curlwrappers
>> >     --with-libxml-dir=/usr --with-gettext=/usr --enable-sigchild
>> >     --enable-libxml --enable-soap
>> >
>> >     checking for SNMP support... yes
>> >     checking OpenSSL dir for SNMP... /usr
>> >     checking whether to enable UCD SNMP hack... yes
>> >     checking for snmp_parse_oid in -lnetsnmp... no
>> >     checking for init_snmp in -lnetsnmp... no
>> >     configure: error: SNMP sanity check failed. Please check config.log
>> >     for more information.
>> >
>> >     #> vi config.log
>> >     Start with some like:
>> >     configure:2165: error: '__CYGWIN32__' undeclared (first use in this
>> >     function)
>> >     configure:2194: error: '__MINGW32__' undeclared (first use in this
>> >     function)
>> >
>> >     End with some of this:
>> >
>> >     /opt/instantclient/libclntsh.so: file not recognized: File format
>> >     not recognized
>> >     2017 collect2: ld returned 1 exit status
>> >     2018 configure: failed program was:
>> >     2019 #line 88940 "configure"
>> >     2020 #include "confdefs.h"
>> >     2021 /* Override any gcc2 internal prototype to avoid an error.  */
>> >     2022 /* We use char because int might match the return type of a
>> gcc2
>> >     2023     builtin and then its argument prototype would still apply.
>>  */
>> >     2024 char init_snmp();
>> >
>> >
>> >     Thanks
>> >     --
>> >     Angel
>> >
>> >     2010/3/8 Christopher Jones <[email protected]
>> >     <mailto:[email protected]>>
>>
>> >
>> >
>> >         What platform? What PHP version?
>> >         Are you doing something like using 32 bit instantclient on a 64
>> >         bit machine?
>> >
>> >         Chris
>> >
>> >
>> >         Angel Motta wrote:
>> >
>> >             Hi List
>> >             Is my first time that I write to this list.
>> >             I am having problems to compile php with oci support.
>> >
>> >             I run this:
>> >             ./configure --prefix=/usr/local/php --with-xmlrpc
>> >             --with-apxs2=/usr/local/apache2/bin/apxs
>> >             --with-config-file-path=/usr/local/php/etc --with-gd=/usr/
>> >             --with-jpeg-dir=/usr --with-png-dir=/usr
>> >             --with-freetype-dir=/usr --with-xpm-dir=/usr
>> >             --with-zlib=/usr
>> >             --with-oci8=instantclient,/opt/instantclient
>> >             --with-pdo-oci=instantclient,/opt/instantclient,11.1
>> >             --with-openssl-dir=/usr --with-iconv=/usr/local
>> >             --with-curl=/usr --with-curlwrappers --with-libxml-dir=/usr
>> >             --with-gettext=/usr --enable-sigchild --enable-libxml
>> >             --enable-soap
>> >
>> >             And I receive alert at finish of ./configure and I see the
>> >             debug.log with this at the end:
>> >             conftest.c: In function 'main':
>> >             conftest.c:3: warning: incompatible implicit declaration of
>> >             built-in function 'exit'
>> >             /opt/instantclient/libclntsh.so: file not recognized: File
>> >             format not recognized
>> >             collect2: ld returned 1 exit status
>> >
>> >
>> >             Thanks for your assistance
>> >             --
>> >             Angel
>> >
>> >
>> >         --
>> >         Email: [email protected]
>> >         <mailto:[email protected]>    Tel:  +1 650 506 8630
>>
>> >         Blog:  http://blogs.oracle.com/opal/   Free PHP Book:
>> >         http://tinyurl.com/UGPOM
>> >
>> >
>> >
>> >
>> >     --
>> >     Atte
>> >     Angel Motta Paz
>> >
>> >
>> >
>> >
>> > --
>> > Atte
>> > Angel Motta Paz
>>
>> --
>> Email: [email protected]    Tel:  +1 650 506 8630
>> Blog:  http://blogs.oracle.com/opal/   Free PHP Book:
>> http://tinyurl.com/UGPOM
>>
>
>
>
> --
> Atte
> Angel Motta Paz
>



-- 
Atte
Angel Motta Paz