Re: hpaio scannen ja, aber Drucken NEIN!?
Taxena Gasparov <[email protected]>
| Newsgroups | spline.eisfair.dev |
|---|---|
| Organization | spline |
| Message-ID | <[email protected]> |
Hallo Holger, Am 13.11.23 um 17:59 schrieb Holger Bruenjes: > Ich habe jetzt nach viel Rekursion das 'hplip-scan-utils' Paket auf Pack-Eis abgelegt Danke dir, 121 MB Abhängigkeiten ist stattlich. Gibt einen Typo in python310-scikit-image.tar.bz2.info: IST: <require-package>python310-packaging 3.4.2</require-package> SOLL: <require-package>python310-packaging 3.4.0</require-package> Habe die Pakete python310-scikit-image + hplip-scan-utils manuell/lokal installiert bekommen: Ist nun noch eine Konfiguration vorzunehmen? $ scanimage -T -> bekannter Fehler $ hp-scan -i warning: hp-scan should not be run as root/superuser. HP Linux Imaging and Printing System (ver. 3.23.8) Scan Utility ver. 2.2 ----------------- | SELECT DEVICE | ----------------- Num Scan device URI -------- ------------------------------------------------------------------------------------------ 0 hpaio:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890 1 net:eis1... Enter number 0...1 for device (q=quit) ?0 warning: No destinations specified. Adding 'file' destination by default. Using device hpaio:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890 Opening connection to device... error: SANE: Error during device I/O (code=9) $ $ hp-check -r > /usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="? > if 'getfacl' not in g and '' is not g and 'file' not in g: > Saving output in log file: /tmp/hp-check.log > > HP Linux Imaging and Printing System (ver. 3.23.8) > Dependency/Version Check Utility ver. 15.1 > > Note: hp-check can be run in three modes: > 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to > successfully compile HPLIP. > 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies > installed to successfully run. > 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). > > Check types: > a. EXTERNALDEP - External Dependencies > b. GENERALDEP - General Dependencies (required both at compile and run time) > c. COMPILEDEP - Compile time Dependencies > d. [All are run-time checks] > PYEXT SCANCONF QUEUES PERMISSION > > Status Types: > OK > MISSING - Missing Dependency or Permission or Plug-in > INCOMPAT - Incompatible dependency-version or Plugin-version > warning: 0-3.4.4 version is not supported. Using 0-0 versions dependencies to verify and install... > > --------------- > | SYSTEM INFO | > --------------- > Kernel: 5.15.137-eisfair-1-SMP #1 SMP Tue Nov 7 23:14:26 CET 2023 GNU/Linux > Host: eis1 > Proc: 5.15.137-eisfair-1-SMP #1 SMP Tue Nov 7 23:14:26 CET 2023 GNU/Linux > Distribution: 0 3.4.4 > Bitness: 32 bit > > > ----------------------- > | HPLIP CONFIGURATION | > ----------------------- > > HPLIP-Version: HPLIP 3.23.8 > HPLIP-Home: /usr/share/hplip > warning: HPLIP-Installation: Auto installation is not supported for 0 distro 3.4.4 version > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf. Generated from hplip.conf.in by configure. > > [hplip] > version=3.23.8 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/cups/model/manufacturer-PPDs/hplip > ppdbase=/usr/share/cups/model/manufacturer-PPDs > doc=/usr/share/doc/packages/hplip > html=/usr/share/doc/packages/hplip > icon=/usr/share/applications > cupsbackend=/usr/lib/cups/backend > cupsfilter=/usr/lib/cups/filter > drv=/usr/lib/cups/driver > bin=/usr/bin > apparmor=/etc/apparmor.d > # Following values are determined at configure time and cannot be changed. > [configure] > network-build=no > libusb01-build=no > pp-build=no > gui-build=yes > scanner-build=yes > fax-build=yes > dbus-build=yes > cups11-build=no > doc-build=yes > shadow-build=no > hpijs-install=yes > foomatic-drv-install=no > foomatic-ppd-install=yes > foomatic-rip-hplip-install=no > hpcups-install=yes > cups-drv-install=no > cups-ppd-install=yes > internal-tag=3.23.8 > restricted-build=no > ui-toolkit=qt5 > qt3=no > qt4=no > qt5=yes > policy-kit=no > lite-build=no > udev_sysfs_rules=no > hpcups-only-build=no > hpijs-only-build=no > apparmor_build=no > class-driver=no > > > Current contents of '/var/lib/hp/hplip.state' file: > Plugins are not installed. Could not access file: No such file or directory > > Current contents of '~/.hplip/hplip.conf' file: > warning: Could not access file: No such file or directory > <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> > > ------------------------- > | External Dependencies | > ------------------------- > cups CUPS - Common Unix Printing System REQUIRED 1.1 2.4.2 OK 'CUPS Scheduler is running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.56.1 OK - > error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed' scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.2.1 OK - error: dbus DBus - Message bus system REQUIRED - 1.14.6 MISSING 'DBUS may not be installed or not running' > error: policykit PolicyKit - Administrative policy framework OPTIONAL - - MISSING 'policykit needs to be installed' network network -wget OPTIONAL - 1.21.3 OK - > error: avahi-utils avahi-utils OPTIONAL - - MISSING 'avahi-utils needs to be installed' > > ------------------------ > | General Dependencies | > ------------------------ > > error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.4.2 MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - 2.4.2 MISSING 'cups-image needs to be installed' > error: libpthread libpthread - POSIX threads library REQUIRED - b'2.37' MISSING 'libpthread needs to be installed' > error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed' > sane SANE - Scanning library REQUIRED - - OK - > error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed' > error: libavahi-dev libavahi-dev REQUIRED - - MISSING 'libavahi-dev needs to be installed' > error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 3.1.4 MISSING 'libcrypto needs to be installed' python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.10.12 OK - > error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed' > error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' > error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' > python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.3.2 OK - > python3-xml Python XML libraries REQUIRED - 2.5.0 OK - error: python3-devel Python devel - Python development files REQUIRED 2.2 3.10.12 MISSING 'python3-devel needs to be installed' > python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 9.5.0 OK - > error: python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 - MISSING 'python3-reportlab needs to be installed' > > -------------- > | COMPILEDEP | > -------------- > > error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed' > error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed' > error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed' > > --------------------- > | Python Extentions | > --------------------- > > cupsext CUPS-Extension REQUIRED - 3.23.8 OK - > hpmudext IO-Extension REQUIRED - 3.23.8 OK - > > ---------------------- > | Scan Configuration | > ---------------------- > > hpaio HPLIP-SANE-Backend REQUIRED - 3.23.8 OK 'hpaio found in /etc/sane.d/dll.conf' > scanext Scan-SANE-Extension REQUIRED - 3.23.8 OK - > > ------------------------------ > | DISCOVERED SCANNER DEVICES | > ------------------------------ > device `hpaio:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=00CNB886DN3V' is a Hewlett-Packard HP_Color_LaserJet_CM1312nfi_MFP all-in-one > device `net:ka-eis1.swuskas.goip.de:hpaio:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890' is a Hewlett-Packard HP_Color_LaserJet_CM1312nfi_MFP all-in-one > > > -------------------------- > | DISCOVERED USB DEVICES | > -------------------------- > Device URI Model > ----------------------------------------------------------- ------------------------------------ > hp:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890 HP Color LaserJet CM1312nfi MFP > > --------------------------------- > | INSTALLED CUPS PRINTER QUEUES | > --------------------------------- > > usbpr1 > ------ > Type: Unknown > Device URI: localhost > > all > --- > Type: Unknown > Device URI: localhost > > > -------------- > | PERMISSION | > -------------- > USB None Required - - OK Node:'/dev/bus/usb/001/003' Perm:' root lp rw- rw- r--' > ----------- > | SUMMARY | > ----------- > > Missing Required Dependencies > ----------------------------- > None > > Missing Optional Dependencies > ----------------------------- > None > > > Total Errors: 21 > Total Warnings: 1 > > > Done. In /var/log/messages wird noch folgendes bei Aufruf von "hp-check -r" gelogt: > 258 Nov 14 00:33:36 ka-eis1 hp-check: hp-check[25212]: warning: 0-3.4.4 version is not supported. Using 0-0 versions dependencies to verify and install... > 259 Nov 14 00:33:37 ka-eis1 hp-check: hp-check[25212]: warning: HPLIP-Installation: Auto installation is not supported for 0 distro 3.4.4 version > 260 Nov 14 00:33:37 ka-eis1 hp-check: hp-check[25212]: warning: Could not access file: No such file or directory > 261 Nov 14 00:33:40 ka-eis1 saned[26050]: saned (AF-indep+IPv6) from sane-backends 1.2.1 starting up > 262 Nov 14 00:33:40 ka-eis1 saned[26050]: check_host: access by remote host: ::ffff:192.168.7.22 > 263 Nov 14 00:33:40 ka-eis1 saned[26050]: init: access granted to saned-user@::ffff:192.168.7.22 > 264 Nov 14 00:33:40 ka-eis1 saned[26050]: saned exiting > 265 Nov 14 00:33:40 ka-eis1 hp-check: io/hpmud/musb.c 2187: [25212] hpmud_make_usb_uri() bus=001 dev=003 > 266 Nov 14 00:33:40 ka-eis1 hp-check: io/hpmud/musb.c 2284: hpmud_make_usb_uri() uri=hp:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890 bytes_read=59 Hast du einen Verdacht? Welche Test kann ich ggf. noch machen? Taxi