Re: Xen Fli4l Frage/Problem
Marko Lueke <[email protected]>
| Newsgroups | spline.eisxen |
|---|---|
| Organization | spline |
| Message-ID | <[email protected]> |
Hallo Stefan
Am 19.02.2011 19:58, schrieb Stefan Kuhne:
> Am 19.02.2011 19:49, schrieb Marko Lueke:
>
> Hallo,
>
>> hab ausversehen meinen Fli4l abgeschossen
>>
> wie?
>
> Stefan Kuhne
bin ausversehen auf [m]kfli4l gekommen
hab aber noch ne Sicherung des ganzen, also PacketmÀÃig um es wie in der
RC3 beschrieben wieder aufsetzen zu können, nur selbst im MenÌ komm ich
schon nicht weiter
Management for Xen domain lh-router
Status: Domain is not running
Buildstatus: Domain is not built!
You have to run mkfli4l first
fli4l configuration file(s):
No. Filename
1 - base.txt
Boot-Order: 50
Please enter command:
run [m]kfli4l,
Enter command or [1] to edit configuration file, ENTER=Return:
laut Anleitung muà einmal mkfli4l ausgefÌhrt werden
----------------------------------------------------------
Warning: Your kernel (2.6.24-24-xen) is missing the speaker module
(kernel/drivers/input/misc/pcspkr.ko). Therefore the router
will not beep although you set beep='yes' or
imond_beep='yes'.
Warning: Please consider removing all config variables of the old
packetfilter section from your config file to avoid any
confusion.
Error in configuration, aborting...
An Error occured while creating fli4l-files.
============================================
unable to open opt/files/lib/modules/2.6.24-24-xen/modules.alias,
ignoring aliases
unable to open opt/files/lib/modules/2.6.24-24-xen/modules.symbols,
ignoring aliases
unable to open opt/files/lib/modules/2.6.24-24-xen/modules.dep,
ignoring depdendencies
Can't access 'ne2k-pci'
Can't access 'nls_cp850'
Can't access 'nls_iso8859-1'
Can't access 'ip_tables'
Can't access 'iptable_filter'
Can't access 'ipt_log_target'
Can't access 'ipt_reject_target'
Can't access 'iptable_nat'
Can't access 'ipt_masquerade_target'
Can't access 'ipt_state'
Can't access 'ipt_length'
Can't access 'ipt_comment'
Can't access 'ipt_limit'
Can't access 'ipt_conntrack'
Can't access 'ipt_udp'
Can't access 'ipt_tcp'
Warning: Your kernel (2.6.24-24-xen) is missing the speaker module
(kernel/drivers/input/misc/pcspkr.ko). Therefore the router
will not beep although you set beep='yes' or
imond_beep='yes'.
Warning: Please consider removing all config variables of the old
packetfilter section from your config file to avoid any
confusion.
Error in configuration, aborting...
hit RETURN to continue ...