Re: Xen Fli4l Frage/Problem

Nachtrag

mkfli4l hatte ich in der Dom0 ausgefÃŒhrt

Marko

Am 19.02.2011 21:39, schrieb Marko Lueke:
> nabend Stefan,
>
> Am 19.02.2011 21:23, schrieb Stefan Kuhne:
>> Am 19.02.2011 20:11, schrieb Marko Lueke:
>>
>> Hallo,
>>
>>> bin ausversehen auf [m]kfli4l gekommen
>>>
>> das macht aber nichts kaputt, sonst wer meiner stÀndig defekt.
>>
>>> hab aber noch ne Sicherung des ganzen, also PacketmÀßig um es wie in der
>>> RC3 beschrieben wieder aufsetzen zu können, nur selbst im MenÌ komm ich
>>> schon nicht weiter
>>>
>>> No. Filename
>>> 1 - base.txt
>>
>> Wo baust Du dein fli4l normalerweise?
>> (in der dom0 oder extern)
>>
>> Stefan Kuhne
>
> ich stehe total auf dem Schlauch,
> gebaut hab ich den Fli4l immer extern, das Problem ich jetzt nur,
>
> Name of domain [fli4l]? lh-router
> .Error: Unable to connect to xend: Broken pipe.
> Done.
> Press ENTER to continue
>
> das kommt ja schon beim entpacken des mitgebrachen Templates, wenn ich
> wehnigstends das zum laufen kriegen wÃŒrde um das einmal zu booten um
> mein gesichertes Fli4l 3.4.0 aufspielen zu können, das komische ist, es
> wird zwar trotz Fehler im MenÌ die Domain angelegt, aber trotzdem komm
> ich nicht weiter
>
> es mÃŒste doch aber zumindest das Template laufen?
>
> komm nicht weiter als bis hier
>
>
>
> .Done.
> Press ENTER to continue
>
> Checking if xend is running ..
>
> Management for Xen domain lh-router
>
> Status: Domain is not running
> Buildstatus: Domain is not built!
> You have to run mkfli4l first
>
>
> fli4l configuration file(s):
>
> No. Filename
> 1 - base.txt
> Boot-Order: 50
>
> Please enter command:
> run [m]kfli4l,
>
> Enter command or [1] to edit configuration file, ENTER=Return: m
>
> fli4l 3.4.0 - starting build process
> ==============================================================================
>
>
> using configuration from directory 'config.lh-router'...
>
> --- read and check the build-environment from
> config.lh-router/mkfli4l.conf...
> ------------------------------------------------------------------------------
>
>
> --- check configuration in directory "config.lh-router"
> ----------------------
> unable to open opt/files/lib/modules/2.6.24-24-xen/modules.alias,
> ignoring aliases
> unable to open opt/files/lib/modules/2.6.24-24-xen/modules.symbols,
> ignoring aliases
> unable to open opt/files/lib/modules/2.6.24-24-xen/modules.dep,
> ignoring depdendencies
> Can't access 'ne2k-pci'
> Can't access 'nls_cp850'
> Can't access 'nls_iso8859-1'
> Can't access 'ip_tables'
> Can't access 'iptable_filter'
> Can't access 'ipt_log_target'
> Can't access 'ipt_reject_target'
> Can't access 'iptable_nat'
> Can't access 'ipt_masquerade_target'
> Can't access 'ipt_state'
> Can't access 'ipt_length'
> Can't access 'ipt_comment'
> Can't access 'ipt_limit'
> Can't access 'ipt_conntrack'
> Can't access 'ipt_udp'
> Can't access 'ipt_tcp'
> Warning: Your kernel (2.6.24-24-xen) is missing the speaker module
> (kernel/drivers/input/misc/pcspkr.ko). Therefore the router
> will not beep although you set beep='yes' or
> imond_beep='yes'.
> Warning: Please consider removing all config variables of the old
> packetfilter section from your config file to avoid any
> confusion.
> Error in configuration, aborting...
> An Error occured while creating fli4l-files.
> ============================================
> unable to open opt/files/lib/modules/2.6.24-24-xen/modules.alias,
> ignoring aliases
> unable to open opt/files/lib/modules/2.6.24-24-xen/modules.symbols,
> ignoring aliases
> unable to open opt/files/lib/modules/2.6.24-24-xen/modules.dep,
> ignoring depdendencies
> Can't access 'ne2k-pci'
> Can't access 'nls_cp850'
> Can't access 'nls_iso8859-1'
> Can't access 'ip_tables'
> Can't access 'iptable_filter'
> Can't access 'ipt_log_target'
> Can't access 'ipt_reject_target'
> Can't access 'iptable_nat'
> Can't access 'ipt_masquerade_target'
> Can't access 'ipt_state'
> Can't access 'ipt_length'
> Can't access 'ipt_comment'
> Can't access 'ipt_limit'
> Can't access 'ipt_conntrack'
> Can't access 'ipt_udp'
> Can't access 'ipt_tcp'
> Warning: Your kernel (2.6.24-24-xen) is missing the speaker module
> (kernel/drivers/input/misc/pcspkr.ko). Therefore the router
> will not beep although you set beep='yes' or
> imond_beep='yes'.
> Warning: Please consider removing all config variables of the old
> packetfilter section from your config file to avoid any
> confusion.
> Error in configuration, aborting...
>
> hit RETURN to continue ...
>
> The build of fli4l returned an error!
> Press ENTER to continue
>
>
>
>
>
>