Re: fli4l: Keine Zeitsychronisation mehr
Ulrich Hupe <[email protected]>
| Newsgroups | spline.fli4l |
|---|---|
| Organization | spline |
| Message-ID | <[email protected]> |
> > PS Chrony läuft doch nicht. Woran kann das liegen? > Wolfgang Bei mir läuft crony Version 3.10.19 64 bit # Optional package: CHRONY #------------------------------------------------------------------------------ OPT_CHRONY='yes' # enable ntp time daemon (client/server) CHRONY_TIMESERVICE='no' # enable additional rfc 868 compliant time Status der Chrony Zeitsynchronisation 210 Number of sources = 3 .-- Source mode '^' = server, '=' = peer, '#' = local clock. / .- Source state '*' = current synced, '+' = combined , '-' = not combined, | / '?' = unreachable, 'x' = time may be in error, '~' = time too variable. || .- xxxx [ yyyy ] +/- zzzz || / xxxx = adjusted offset, || Log2(Polling interval) -. | yyyy = measured offset, || \ | zzzz = estimated error. || | | MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^* 25000-036.cloud.services. 2 13 377 108m +13us[ +321us] +/- 16ms ^+ localhost 2 13 377 34m +907us[ +907us] +/- 42ms ^- 185.254.97.53 3 13 377 39m +448us[ +448us] +/- 97ms kann ich auch so auf der Router web page sehen. laufen muß crony zumindest schon Ulrich