[PATCH v4 2/3] doc: Migrate mailing-list to lists.u-boot-project.org

The U-Boot Mailing-list is moving to the lists.u-boot-project.org
domain, so update all references of list.denx.de to the new
domain in the documentation.

Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
---
 doc/CONTRIBUTE.rst              |  4 ++--
 doc/develop/security.rst        |  2 +-
 doc/develop/sending_patches.rst | 12 ++++++------
 doc/git-mailrc                  |  2 +-
 doc/index.rst                   |  2 +-
 5 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/doc/CONTRIBUTE.rst b/doc/CONTRIBUTE.rst
index e8fa595ed4a..8494315254e 100644
--- a/doc/CONTRIBUTE.rst
+++ b/doc/CONTRIBUTE.rst
@@ -28,7 +28,7 @@ Contributions
 
 Contributions to the project are welcome. The U-Boot project uses a fairly
 traditional Linux style development work-flow using git and `a mailing list
-<https://lists.denx.de/listinfo/u-boot>`_.
+<https://lists.u-boot-project.org/listinfo/u-boot>`_.
 
 Patches should be sent to the mailing list using ``git send-email`` or the
 equivalent commands using ``b4`` or ``patman`` with appropriate sign-off and
@@ -41,7 +41,7 @@ The b4 tool automates a number of components mentioned above.
 Code is not the only thing you can contribute to the project. As most
 open-source projects, the U-Boot project suffers from a lack of reviewers.
 Consider spending some time reading patches on `the mailing list archive
-<https://lists.denx.de/pipermail/u-boot/>`_ and providing feedback to
+<https://lists.u-boot-project.org/pipermail/u-boot/>`_ and providing feedback to
 contributors when something could be improved or if you have questions. Contrary
 to what's most often believed, you do not need to be an expert to review patches
 and the project will benefit from people with different skillsets and experience
diff --git a/doc/develop/security.rst b/doc/develop/security.rst
index 84b130646f3..ed652ec756e 100644
--- a/doc/develop/security.rst
+++ b/doc/develop/security.rst
@@ -11,7 +11,7 @@ Contact
 -------
 
 The preferred initial point of contact is to send email to
-`[email protected]` and use `scripts/get_maintainers.pl` to also include any
+`[email protected]` and use `scripts/get_maintainers.pl` to also include any
 relevant custodians. In addition, Tom Rini should be contacted at
 `[email protected]`.
 
diff --git a/doc/develop/sending_patches.rst b/doc/develop/sending_patches.rst
index c3e0ef27824..768c8375cf4 100644
--- a/doc/develop/sending_patches.rst
+++ b/doc/develop/sending_patches.rst
@@ -5,7 +5,7 @@ Sending patches
 
 *Before you begin* to implement any new ideas or concepts it is always a good
 idea to present your plans on the `U-Boot mailing list
-<https://lists.denx.de/listinfo/u-boot>`_. U-Boot supports a huge amount of
+<https://lists.u-boot-project.org/listinfo/u-boot>`_. U-Boot supports a huge amount of
 very different systems, and it is often impossible for the individual developer
 to oversee the consequences of a specific change to all architectures.
 Discussing concepts early can help you to avoid spending effort on code which,
@@ -25,7 +25,7 @@ Using b4
 Use the `b4 <https://b4.docs.kernel.org/en/latest/>`__ tool to prepare and send
 your patches. b4 has become the preferred tool to sending patches for many Linux
 kernel contributors, and U-Boot ships with a ready-to-use ``.b4-config`` that
-targets ``[email protected]`` and integrates with ``scripts/get_maintainer.pl``
+targets ``[email protected]`` and integrates with ``scripts/get_maintainer.pl``
 for recipient discovery.
 
 Start a topical series with ``b4 prep`` and keep the commits organised with
@@ -51,7 +51,7 @@ additional runs.
 
 When the series is ready, use ``b4 send``. Begin with ``--dry-run`` to review the
 generated emails and ``--reflect`` to copy yourself for records before
-dispatching to ``[email protected]``.
+dispatching to ``[email protected]``.
 
 .. code-block:: bash
 
@@ -86,8 +86,8 @@ patman now lives outside the U-Boot tree; install it with
 General Patch Submission Rules
 ------------------------------
 
-* All patches must be sent to the `[email protected]
-  <https://lists.denx.de/listinfo/u-boot>`_ mailing list.
+* All patches must be sent to the `[email protected]
+  <https://lists.u-boot-project.org/listinfo/u-boot>`_ mailing list.
 
 * If your patch affects the code maintained by one of the :ref:`custodians`, CC
   them when emailing your patch. The easiest way to make sure you don't forget
@@ -145,7 +145,7 @@ General Patch Submission Rules
   If you believe you need to use a mailing list for testing (instead of any
   regular mail address you own), we have a special test list for such purposes.
   It would be best to subscribe to the list for the duration of your tests to
-  avoid repeated moderation - see https://lists.denx.de/listinfo/test
+  avoid repeated moderation - see https://lists.u-boot-project.org/listinfo/test
 
 * Choose a meaningful Subject: - keep in mind that the Subject will also be
   visible as headline of your commit message. Make sure the subject does not
diff --git a/doc/git-mailrc b/doc/git-mailrc
index 65626d89eac..f0ba30a5c74 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -5,7 +5,7 @@
 # Then when sending patches, you can use:
 #	git send-email --to u-boot --cc i2c ...
 
-alias uboot  [email protected]
+alias uboot  [email protected]
 alias u-boot uboot
 
 # Maintainer aliases.  Use the same alias here as patchwork to keep
diff --git a/doc/index.rst b/doc/index.rst
index 5d732ff7a54..6fe8ca0788b 100644
--- a/doc/index.rst
+++ b/doc/index.rst
@@ -9,7 +9,7 @@ This is the top level of the U-Boot's documentation tree.  U-Boot
 documentation, like the U-Boot itself, is very much a work in progress;
 that is especially true as we work to integrate our many scattered
 documents into a coherent whole.  Please note that improvements to the
-documentation are welcome; join the U-Boot list at http://lists.denx.de
+documentation are welcome; join the U-Boot list at http://lists.u-boot-project.org
 if you want to help out.
 
 .. toctree::

-- 
2.34.1