[Accel-config] Re: [PATCH v2 1/1] accel-config/dsa_test: Add device and wq selection for test
Dave Jiang <dave.jiang at intel.com> Fri, 24 Sep 2021 09:26:42 -0700
| Newsgroups | dev.linux.lists.accel-config |
|---|---|
| Message-ID | <[email protected]> |
On 9/24/2021 4:34 AM, Tony Zhu wrote:
> Add -d to input device like dsa0/wq0.0 which allows the device and wq selection.
>
> Signed-off-by: Tony Zhu <tony.zhu(a)intel.com>
> Reviewed-by: Dave Jiang <dave.jiang(a)intel.com>
> ---
> test/dsa.c | 63 +++++++++++++++++++++++++++++++++++++++++++++----
> test/dsa.h | 2 +-
> test/dsa_test.c | 14 +++++++++--
> 3 files changed, 71 insertions(+), 8 deletions(-)
>
> diff --git a/test/dsa.c b/test/dsa.c
> index ce6f6a1..83e4b4e 100644
> --- a/test/dsa.c
> +++ b/test/dsa.c
> @@ -146,6 +146,55 @@ static struct accfg_wq *dsa_get_wq(struct dsa_context *ctx,
> return NULL;
> }
>
> +static struct accfg_wq *dsa_get_wq_byid(struct dsa_context *ctx,
> + int dev_id, int wq_id)
Can you align the function indentation such as:
+static struct accfg_wq *dsa_get_wq_byid(struct dsa_context *ctx,
+ int dev_id, int wq_id)
> +{
> + struct accfg_device *device;
> + struct accfg_wq *wq;
> + int rc;
> +
> + accfg_device_foreach(ctx->ctx, device) {
> + enum accfg_device_state dstate;
> +
> + /* Make sure that the device is enabled */
> + dstate = accfg_device_get_state(device);
> + if (dstate != ACCFG_DEVICE_ENABLED)
> + continue;
Since you are only checking it here once, you can drop the variable
if (accfg_device_get_state(device) != ACCFG_DEVICE_ENABLED)
continue;
> +
> + /* Match the device to the id requested */
> + if (accfg_device_get_id(device) != dev_id &&
> + dev_id != -1)
Preferably if you can line up the arguments:
if (accfg_device_get_id(device) != dev_id &&
dev_id != -1)
Also, can we define -1?
#define ACCFG_DEVICE_INVALID_ID -1
> + continue;
> +
> + accfg_wq_foreach(device, wq) {
> + enum accfg_wq_state wstate;
> + enum accfg_wq_type type;
> +
> + /* Get a workqueue that's enabled */
> + wstate = accfg_wq_get_state(wq);
> + if (wstate != ACCFG_WQ_ENABLED)
> + continue;
Probably no need to have wstate variable. Just check directly.
> +
> + /* The wq type should be user */
> + type = accfg_wq_get_type(wq);
> + if (type != ACCFG_WQT_USER)
> + continue;
Same here for type.
> +
> + /* Make sure the wq id is correct */
> + if(wq_id != accfg_wq_get_id(wq))
> + continue;
> +
> + rc = dsa_setup_wq(ctx, wq);
> + if (rc < 0)
> + return NULL;
> +
> + return wq;
> + }
> + }
> +
> + return NULL;
> +}
> +
> static uint32_t bsr(uint32_t val)
> {
> uint32_t msb;
> @@ -154,7 +203,7 @@ static uint32_t bsr(uint32_t val)
> return msb - 1;
> }
>
> -int dsa_alloc(struct dsa_context *ctx, int shared)
> +int dsa_alloc(struct dsa_context *ctx, int shared, int dev_id, int wq_id)
> {
> struct accfg_device *dev;
>
> @@ -162,14 +211,18 @@ int dsa_alloc(struct dsa_context *ctx, int shared)
> if (ctx->wq_reg)
> return 0;
>
> - ctx->wq = dsa_get_wq(ctx, -1, shared);
> + if(wq_id != -1){
> + ctx->wq = dsa_get_wq_byid(ctx, dev_id, wq_id);
> + }else{
> + ctx->wq = dsa_get_wq(ctx, dev_id, shared);
> + }
Fix spacing here. Also single line does not need {}:
if (wq_id != -1)
ctx->wq = dsa_get_wq_byid(ctx, dev_id, wq_id);
else
ctx->wq = dsa_get_wq(...);
> +
> if (!ctx->wq) {
> err("No usable wq found\n");
> return -ENODEV;
> }
> dev = accfg_wq_get_device(ctx->wq);
> -
> - ctx->dedicated = !shared;
> + ctx->dedicated = accfg_wq_get_mode(ctx->wq);
> ctx->wq_size = accfg_wq_get_size(ctx->wq);
> ctx->wq_idx = accfg_wq_get_id(ctx->wq);
> ctx->bof = accfg_wq_get_block_on_fault(ctx->wq);
> @@ -182,7 +235,7 @@ int dsa_alloc(struct dsa_context *ctx, int shared)
> ctx->max_xfer_bits = bsr(ctx->max_xfer_size);
>
> info("alloc wq %d shared %d size %d addr %p batch sz %#x xfer sz %#x\n",
> - ctx->wq_idx, shared, ctx->wq_size, ctx->wq_reg,
> + ctx->wq_idx, ctx->dedicated, ctx->wq_size, ctx->wq_reg,
> ctx->max_batch_size, ctx->max_xfer_size);
>
> return 0;
> diff --git a/test/dsa.h b/test/dsa.h
> index 5db0c02..393221b 100644
> --- a/test/dsa.h
> +++ b/test/dsa.h
> @@ -211,7 +211,7 @@ int memcmp_pattern(const void *src, const uint64_t pattern, size_t len);
> int dsa_enqcmd(struct dsa_context *ctx, struct dsa_hw_desc *hw);
>
> struct dsa_context *dsa_init(void);
> -int dsa_alloc(struct dsa_context *ctx, int shared);
> +int dsa_alloc(struct dsa_context *ctx, int shared, int dev_id, int wq_id);
> int alloc_task(struct dsa_context *ctx);
> struct task *__alloc_task(void);
> int init_task(struct task *tsk, int tflags, int opcode,
> diff --git a/test/dsa_test.c b/test/dsa_test.c
> index 5f7a7f1..a2bffe8 100644
> --- a/test/dsa_test.c
> +++ b/test/dsa_test.c
> @@ -23,6 +23,7 @@ static void usage(void)
> "-o <opcode> ; opcode, same value as in DSA spec\n"
> "-b <opcode> ; if batch opcode, opcode in the batch\n"
> "-c <batch_size> ; if batch opcode, number of descriptors for batch\n"
> + "-d ; wq device such as dsa0/wq0.0\n"
> "-t <ms timeout> ; ms to wait for descs to complete\n"
> "-v ; verbose\n"
> "-h ; print this message\n");
> @@ -110,8 +111,10 @@ int main(int argc, char *argv[])
> int tflags = TEST_FLAGS_BOF;
> int opt;
> unsigned int bsize = 0;
> + char dev_type[MAX_DEV_LEN];
> + int wq_id = -1, dev_id=-1, dev_wq_id=-1;
>
> - while ((opt = getopt(argc, argv, "w:l:f:o:b:c:t:p:vh")) != -1) {
> + while ((opt = getopt(argc, argv, "w:l:f:o:b:c:d:t:p:vh")) != -1) {
> switch (opt) {
> case 'w':
> wq_type = atoi(optarg);
> @@ -131,6 +134,13 @@ int main(int argc, char *argv[])
> case 'c':
> bsize = strtoul(optarg, NULL, 0);
> break;
> + case 'd':
> + if (sscanf(optarg, "%[a-z]%u/%*[a-z]%u.%u", dev_type, \
> + &dev_id, &dev_wq_id, &wq_id) != 4) {
> + err("invalid input device:dev_wq_id:%d ,wq_id:%d\n", dev_wq_id, wq_id);
> + return -EINVAL;
> + }
> + break;
> case 't':
> ms_timeout = strtoul(optarg, NULL, 0);
> break;
> @@ -150,7 +160,7 @@ int main(int argc, char *argv[])
> if (dsa == NULL)
> return -ENOMEM;
>
> - rc = dsa_alloc(dsa, wq_type);
> + rc = dsa_alloc(dsa, wq_type, dev_id, wq_id);
> if (rc < 0)
> return -ENOMEM;
>