Re: [PATCH 04/12] i3c: master: Support ACPI enumeration
kernel test robot <[email protected]>
| Newsgroups | dev.linux.lists.acpica-devel,dev.linux.lists.oe-kbuild-all,org.infradead.lists.linux-i3c,org.kernel.vger.linux-acpi,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-hwmon,org.kernel.vger.linux-kernel,org.kernel.vger.linux-tegra |
|---|---|
| Message-ID | <[email protected]> |
Hi Akhil, kernel test robot noticed the following build errors: [auto build test ERROR on next-20260320] [also build test ERROR on linus/master v7.0-rc4] [cannot apply to i3c/i3c/next rafael-pm/linux-next rafael-pm/bleeding-edge groeck-staging/hwmon-next v7.0-rc4 v7.0-rc3 v7.0-rc2] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Akhil-R/dt-bindings-i3c-Add-mipi-i3c-static-method-to-support-SETAASA/20260322-174037 base: next-20260320 patch link: https://lore.kernel.org/r/20260318172820.13771-5-akhilrajeev%40nvidia.com patch subject: [PATCH 04/12] i3c: master: Support ACPI enumeration config: sparc-randconfig-002-20260322 (https://download.01.org/0day-ci/archive/20260323/[email protected]/config) compiler: sparc-linux-gcc (GCC) 15.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260323/[email protected]/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <[email protected]> | Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ All errors (new ones prefixed by >>): drivers/i3c/master.c: In function 'i3c_master_add_i2c_boardinfo': >> drivers/i3c/master.c:2449:23: error: implicit declaration of function 'acpi_dev_get_resources'; did you mean 'acpi_get_event_resources'? [-Wimplicit-function-declaration] 2449 | ret = acpi_dev_get_resources(adev, &resources, | ^~~~~~~~~~~~~~~~~~~~~~ | acpi_get_event_resources >> drivers/i3c/master.c:2455:17: error: implicit declaration of function 'acpi_dev_free_resource_list' [-Wimplicit-function-declaration] 2455 | acpi_dev_free_resource_list(&resources); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/i3c/master.c: In function 'i3c_master_add_acpi_dev': >> drivers/i3c/master.c:2556:9: error: unknown type name 'acpi_bus_address'; did you mean 'acpi_io_address'? 2556 | acpi_bus_address adr; | ^~~~~~~~~~~~~~~~ | acpi_io_address >> drivers/i3c/master.c:2563:14: error: implicit declaration of function 'acpi_has_method'; did you mean 'acpi_has_watchdog'? [-Wimplicit-function-declaration] 2563 | if (!acpi_has_method(adev->handle, "_ADR")) | ^~~~~~~~~~~~~~~ | acpi_has_watchdog >> drivers/i3c/master.c:2563:34: error: invalid use of undefined type 'struct acpi_device' 2563 | if (!acpi_has_method(adev->handle, "_ADR")) | ^~ >> drivers/i3c/master.c:2566:15: error: implicit declaration of function 'acpi_device_adr'; did you mean 'acpi_device_handle'? [-Wimplicit-function-declaration] 2566 | adr = acpi_device_adr(adev); | ^~~~~~~~~~~~~~~ | acpi_device_handle vim +2449 drivers/i3c/master.c 2423 2424 static int 2425 i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master, 2426 struct fwnode_handle *fwnode, u32 *reg) 2427 { 2428 struct i2c_dev_boardinfo *boardinfo; 2429 struct device *dev = &master->dev; 2430 struct acpi_device *adev; 2431 LIST_HEAD(resources); 2432 int ret; 2433 2434 boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL); 2435 if (!boardinfo) 2436 return -ENOMEM; 2437 2438 if (is_of_node(fwnode)) { 2439 ret = of_i2c_get_board_info(dev, to_of_node(fwnode), &boardinfo->base); 2440 if (ret) 2441 return ret; 2442 2443 /* LVR is encoded in reg[2] for Device Tree. */ 2444 boardinfo->lvr = reg[2]; 2445 } else if (is_acpi_device_node(fwnode)) { 2446 adev = to_acpi_device_node(fwnode); 2447 boardinfo->base.fwnode = acpi_fwnode_handle(adev); 2448 > 2449 ret = acpi_dev_get_resources(adev, &resources, 2450 i3c_acpi_get_i2c_resource, boardinfo); 2451 2452 if (ret < 0) 2453 return ret; 2454 > 2455 acpi_dev_free_resource_list(&resources); 2456 2457 if (!boardinfo->base.addr) 2458 return -ENODEV; 2459 } else { 2460 return -EINVAL; 2461 } 2462 2463 /* 2464 * The I3C Specification does not clearly say I2C devices with 10-bit 2465 * address are supported. These devices can't be passed properly through 2466 * DEFSLVS command. 2467 */ 2468 if (boardinfo->base.flags & I2C_CLIENT_TEN) { 2469 dev_err(dev, "I2C device with 10 bit address not supported."); 2470 return -EOPNOTSUPP; 2471 } 2472 2473 list_add_tail(&boardinfo->node, &master->boardinfo.i2c); 2474 fwnode_handle_get(fwnode); 2475 2476 return 0; 2477 } 2478 2479 static int 2480 i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master, 2481 struct fwnode_handle *fwnode, u32 *reg) 2482 { 2483 struct i3c_dev_boardinfo *boardinfo; 2484 struct device *dev = &master->dev; 2485 enum i3c_addr_slot_status addrstatus; 2486 u32 init_dyn_addr = 0; 2487 2488 boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL); 2489 if (!boardinfo) 2490 return -ENOMEM; 2491 2492 if (reg[0]) { 2493 if (reg[0] > I3C_MAX_ADDR) 2494 return -EINVAL; 2495 2496 addrstatus = i3c_bus_get_addr_slot_status(&master->bus, 2497 reg[0]); 2498 if (addrstatus != I3C_ADDR_SLOT_FREE) 2499 return -EINVAL; 2500 } 2501 2502 boardinfo->static_addr = reg[0]; 2503 2504 if (!fwnode_property_read_u32(fwnode, "assigned-address", &init_dyn_addr)) { 2505 if (init_dyn_addr > I3C_MAX_ADDR) 2506 return -EINVAL; 2507 2508 addrstatus = i3c_bus_get_addr_slot_status(&master->bus, 2509 init_dyn_addr); 2510 if (addrstatus != I3C_ADDR_SLOT_FREE) 2511 return -EINVAL; 2512 } 2513 2514 boardinfo->pid = ((u64)reg[1] << 32) | reg[2]; 2515 2516 if ((boardinfo->pid & GENMASK_ULL(63, 48)) || 2517 I3C_PID_RND_LOWER_32BITS(boardinfo->pid)) 2518 return -EINVAL; 2519 2520 boardinfo->init_dyn_addr = init_dyn_addr; 2521 boardinfo->fwnode = fwnode_handle_get(fwnode); 2522 list_add_tail(&boardinfo->node, &master->boardinfo.i3c); 2523 2524 return 0; 2525 } 2526 2527 static int i3c_master_add_of_dev(struct i3c_master_controller *master, 2528 struct fwnode_handle *fwnode) 2529 { 2530 u32 reg[3]; 2531 int ret; 2532 2533 if (!master) 2534 return -EINVAL; 2535 2536 ret = fwnode_property_read_u32_array(fwnode, "reg", reg, ARRAY_SIZE(reg)); 2537 if (ret) 2538 return ret; 2539 2540 /* 2541 * The manufacturer ID can't be 0. If reg[1] == 0 that means we're 2542 * dealing with an I2C device. 2543 */ 2544 if (!reg[1]) 2545 ret = i3c_master_add_i2c_boardinfo(master, fwnode, reg); 2546 else 2547 ret = i3c_master_add_i3c_boardinfo(master, fwnode, reg); 2548 2549 return ret; 2550 } 2551 2552 static int i3c_master_add_acpi_dev(struct i3c_master_controller *master, 2553 struct fwnode_handle *fwnode) 2554 { 2555 struct acpi_device *adev = to_acpi_device_node(fwnode); > 2556 acpi_bus_address adr; 2557 u32 reg[3] = { 0 }; 2558 2559 /* 2560 * If the ACPI table entry does not have _ADR method, it's an I2C device 2561 * If the ACPI table entry has _ADR method, it's an I3C device 2562 */ > 2563 if (!acpi_has_method(adev->handle, "_ADR")) 2564 return i3c_master_add_i2c_boardinfo(master, fwnode, reg); 2565 > 2566 adr = acpi_device_adr(adev); 2567 2568 /* For I3C devices, _ADR will have the 48 bit PID of the device */ 2569 reg[1] = upper_32_bits(adr); 2570 reg[2] = lower_32_bits(adr); 2571 2572 fwnode_property_read_u32(fwnode, "mipi-i3c-static-address", ®[0]); 2573 2574 return i3c_master_add_i3c_boardinfo(master, fwnode, reg); 2575 } 2576 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki