[PATCH 1/2] ARM: dts: Correct white-space style
Krzysztof Kozlowski <[email protected]> Sat, 1 Aug 2026 23:02:11 +0200
| Newsgroups | dev.linux.lists.asahi,org.infradead.lists.linux-amlogic,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-tegra |
|---|---|
| Message-ID | <[email protected]> |
Correct a few white-space issues, like missing space before bracket '{'
character or spurious space, which will be flagged by dt-check-style
("redundant-whitespace" warning). No functional changes.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
I'll take this directly via soc@.
---
arch/arm/boot/dts/armv7-m.dtsi | 2 +-
arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-nsa320.dts | 4 ++--
arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts | 8 ++++----
arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91rm9200ek.dts | 2 +-
arch/arm/boot/dts/microchip/lan966x-pcb8291.dts | 2 +-
arch/arm/boot/dts/st/stih407-family.dtsi | 2 +-
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 2 +-
arch/arm/boot/dts/xilinx/zynq-cc108.dts | 4 ++--
10 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index 26f5443d85e1..6ee18d6a93ef 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/ {
- nvic: interrupt-controller@e000e100 {
+ nvic: interrupt-controller@e000e100 {
compatible = "arm,armv7m-nvic";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
index 74161b76008a..6c4131b846c1 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
@@ -141,7 +141,7 @@ mdio@200 {
#address-cells = <1>;
#size-cells = <0>;
- switch@0 {
+ switch@0 {
compatible = "brcm,bcm53125";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
index dd5c8ffc8781..56334b71152d 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
@@ -30,12 +30,12 @@ pinctrl: pin-controller@10000 {
/* SATA Activity and Present pins are not connected */
pmx_sata0: pmx-sata0 {
- marvell,pins ;
+ marvell,pins;
marvell,function = "sata0";
};
pmx_sata1: pmx-sata1 {
- marvell,pins ;
+ marvell,pins;
marvell,function = "sata1";
};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
index fec7269088d1..19a286dcc8a5 100644
--- a/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
@@ -35,7 +35,7 @@ led-4 {
};
};
- led-controller-2 {
+ led-controller-2 {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_red
@@ -58,7 +58,7 @@ led-6 {
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default" , "default", "default",
- "default", "default" ;
+ "default", "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>;
pinctrl-2 = <&pinctrl_pio_io_boot
@@ -170,7 +170,7 @@ verbose_bootloader {
input;
};
- nail_bed_detection {
+ nail_bed_detection {
label = "nail bed detection";
gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
input;
@@ -276,7 +276,7 @@ &uart4 {
&flx0 {
status = "okay";
- uart5: serial@200 {
+ uart5: serial@200 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
index 465664628419..75d2e748a3db 100644
--- a/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
@@ -298,7 +298,7 @@ &flx0 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "disabled";
- uart5: serial@200 {
+ uart5: serial@200 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
atmel,use-dma-rx;
diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
index ce691c4692b9..b849bc7049d6 100644
--- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
@@ -117,7 +117,7 @@ kernel@50000 {
reg = <0x50000 0x300000>;
};
- root@350000 {
+ root@350000 {
label = "root";
reg = <0x350000 0x4B0000>;
};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
index 3a3d76af8612..1f0b0b647aa9 100644
--- a/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
@@ -64,7 +64,7 @@ fc3_b_pins: fc3-b-pins {
function = "fc3_b";
};
- can0_b_pins: can0-b-pins {
+ can0_b_pins: can0-b-pins {
/* RX, TX */
pins = "GPIO_35", "GPIO_36";
function = "can0_b";
diff --git a/arch/arm/boot/dts/st/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi
index 08acba209c56..436fafd30317 100644
--- a/arch/arm/boot/dts/st/stih407-family.dtsi
+++ b/arch/arm/boot/dts/st/stih407-family.dtsi
@@ -812,7 +812,7 @@ ethernet0: dwmac@9630000 {
<&clk_s_c0_flexgen CLK_ETH_PHY>;
};
- mailbox0: mailbox@8f00000 {
+ mailbox0: mailbox@8f00000 {
compatible = "st,stih407-mailbox";
reg = <0x8f00000 0x1000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 6022e73f58af..1d6435c59096 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -382,7 +382,7 @@ goodix: goodix-ts@5d {
VDDIO-supply = <&scmi_v3v3_sw>;
touchscreen-size-x = <480>;
touchscreen-size-y = <272>;
- status = "okay" ;
+ status = "okay";
};
};
diff --git a/arch/arm/boot/dts/xilinx/zynq-cc108.dts b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
index f5525c048426..e7cb82c7b8e6 100644
--- a/arch/arm/boot/dts/xilinx/zynq-cc108.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
@@ -92,8 +92,8 @@ partition@f00000 {
&sdhci1 {
status = "okay";
- broken-cd ;
- wp-inverted ;
+ broken-cd;
+ wp-inverted;
};
&uart0 {
--
2.53.0