Re: New test release reload driver
Berkem Dincman <[email protected]> Sun, 19 Oct 2025 02:45:33 +0300
| Newsgroups | dev.linux.lists.brcm80211,org.kernel.vger.linux-wireless |
|---|---|
| Message-ID | <CAC3nzgJM6azT8T4StreR874h5sUarLH62mgHvRZndV_XEOBEgQ@mail.gmail.com> |
This is dmesg the last lines after reloading the driver module 18 Eki 2025 Cmt 21:46 tarihinde Arend van Spriel < [email protected]> şunu yazdı: > On 10/18/2025 5:38 PM, Berkem Dincman wrote: > > I have PostmarketOS on Pinebook Pro v25.06 it has an 6.6.34 kernel > > originally I have custom kernels 6.16.7 6.17-rc7 also booting and wifi > > working 6.18-rc1 sends alot error messages to the screen but works fine > > if the driver (brcmfmac) is reloaded > > Thanks for the feedback. I would be happy to look into the 6.18-rc1 > issue, but you are giving me much to work with. Any kernel logs that > show the error messages would be a start. > > Also please put the mailing lists in Cc: so other people seeing the same > issue can chime in. > > Regards, > Arend >
reload_driver_024409.txt
(text/plain, 47.9 KB)
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.18.0-rc1 (user@pine64-pinebookpro) (gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT Tue Oct 14 12:38:30 GMT 2025
[ 0.000000] Machine model: Pine64 Pinebook Pro
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] cma: Reserved 16 MiB at 0x00000000f6400000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 33 pages/cpu s95704 r8192 d31272 u135168
[ 0.000000] pcpu-alloc: s95704 r8192 d31272 u135168 alloc=33*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GICv3 CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: panic=10 coherent_pool=1M video=HDMI-A-1:1920x1080@60 video=eDP-1:1920x1080@60 loglevel=5 PMOS_FORCE_PARTITION_RESIZE fw_devlink=off nvme_core.default_ps_max_latency_us=5500 pcie_aspm.policy=performance pmos_boot_uuid=fa983328-ced5-4544-9852-75ce9dcf7643 pmos_root_uuid=7df4fcde-b8b2-4620-a947-df29ee4ffd00 pmos_rootfsopts=defaults
[ 0.000000] Unknown kernel command line parameters "PMOS_FORCE_PARTITION_RESIZE pmos_boot_uuid=fa983328-ced5-4544-9852-75ce9dcf7643 pmos_root_uuid=7df4fcde-b8b2-4620-a947-df29ee4ffd00 pmos_rootfsopts=defaults", will be passed to user space.
[ 0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 3MB
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000f5c00000-0x00000000f6000000] (4MB)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1015296
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] ftrace: allocating 44012 entries in 172 pages
[ 0.000000] ftrace: allocated 172 pages with 4 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=6.
[ 0.000000] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=6.
[ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=6.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GIC: enabling workaround for GICv3: Insecure RK3399 integration
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: Broken GIC integration, security disabled
[ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x00000000003a0000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000003b0000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001410] Console: colour dummy device 80x25
[ 0.001435] printk: legacy console [tty0] enabled
[ 0.001616] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.001641] pid_max: default: 32768 minimum: 301
[ 0.001832] LSM: initializing lsm=capability
[ 0.002038] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002074] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.006317] rcu: Hierarchical SRCU implementation.
[ 0.006341] rcu: Max phase no-delay instances is 400.
[ 0.006764] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.007944] smp: Bringing up secondary CPUs ...
[ 0.008934] Detected VIPT I-cache on CPU1
[ 0.009194] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.009220] GICv3: CPU1: using allocated LPI pending table @0x00000000003c0000
[ 0.009285] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.010392] Detected VIPT I-cache on CPU2
[ 0.010623] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.010645] GICv3: CPU2: using allocated LPI pending table @0x00000000003d0000
[ 0.010697] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.011780] Detected VIPT I-cache on CPU3
[ 0.012007] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.012029] GICv3: CPU3: using allocated LPI pending table @0x00000000003e0000
[ 0.012077] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.013144] CPU features: detected: Spectre-v2
[ 0.013166] CPU features: detected: Spectre-BHB
[ 0.013179] CPU features: detected: ARM erratum 1742098
[ 0.013189] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.013196] Detected PIPT I-cache on CPU4
[ 0.013405] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.013424] GICv3: CPU4: using allocated LPI pending table @0x00000000003f0000
[ 0.013472] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.014525] Detected PIPT I-cache on CPU5
[ 0.014717] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.014735] GICv3: CPU5: using allocated LPI pending table @0x0000000000880000
[ 0.014773] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.014926] smp: Brought up 1 node, 6 CPUs
[ 0.014979] SMP: Total of 6 processors activated.
[ 0.014988] CPU: All CPU(s) started at EL2
[ 0.015015] CPU features: detected: 32-bit EL0 Support
[ 0.015024] CPU features: detected: 32-bit EL1 Support
[ 0.015036] CPU features: detected: CRC32 instructions
[ 0.015056] CPU features: detected: PMUv3
[ 0.015159] alternatives: applying system-wide alternatives
[ 0.017978] Memory: 3917864K/4061184K available (14272K kernel code, 2454K rwdata, 4260K rodata, 2304K init, 532K bss, 118592K reserved, 16384K cma-reserved)
[ 0.018978] devtmpfs: initialized
[ 0.033876] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.033921] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.034096] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
[ 0.034431] 26752 pages in range for non-PLT usage
[ 0.034441] 518272 pages in range for PLT usage
[ 0.034524] pinctrl core: initialized pinctrl subsystem
[ 0.038927] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.041206] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.042295] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.043812] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.045645] thermal_sys: Registered thermal governor 'fair_share'
[ 0.045656] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.045664] thermal_sys: Registered thermal governor 'step_wise'
[ 0.045671] thermal_sys: Registered thermal governor 'user_space'
[ 0.045745] cpuidle: using governor ladder
[ 0.045797] cpuidle: using governor menu
[ 0.045968] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.046209] ASID allocator initialised with 65536 entries
[ 0.046774] Serial: AMBA PL011 UART driver
[ 0.069242] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.070054] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[ 0.070443] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.070710] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[ 0.071060] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.071330] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[ 0.071684] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.071932] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[ 0.072333] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.072580] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
[ 0.077541] iommu: Default domain type: Translated
[ 0.077554] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.080899] SCSI subsystem initialized
[ 0.081169] usbcore: registered new interface driver usbfs
[ 0.081217] usbcore: registered new interface driver hub
[ 0.081291] usbcore: registered new device driver usb
[ 0.081734] pps_core: LinuxPPS API ver. 1 registered
[ 0.081743] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.083165] vgaarb: loaded
[ 0.083383] clocksource: Switched to clocksource arch_sys_counter
[ 0.095792] NET: Registered PF_INET protocol family
[ 0.096074] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.100528] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.100643] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.100666] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.101023] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.102317] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.102644] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.102784] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.103010] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.103456] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.103504] PCI: CLS 0 bytes, default 64
[ 0.104235] Unpacking initramfs...
[ 0.111259] kvm [1]: nv: 568 coarse grained trap handlers
[ 0.111804] kvm [1]: IPA Size Limit: 40 bits
[ 0.113210] kvm [1]: vgic-v2@fff20000
[ 0.113291] kvm [1]: GIC system register CPU interface enabled
[ 0.113325] kvm [1]: vgic interrupt IRQ18
[ 0.113394] kvm [1]: Hyp nVHE mode initialized successfully
[ 0.115833] Initialise system trusted keyrings
[ 0.116133] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.203666] NET: Registered PF_ALG protocol family
[ 0.203701] Key type asymmetric registered
[ 0.203710] Asymmetric key parser 'x509' registered
[ 0.203817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.204046] io scheduler mq-deadline registered
[ 0.216492] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 0.216545] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[ 0.216573] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[ 0.217243] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 0.223501] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.223524] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.225328] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.225348] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.227734] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.233350] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[ 0.233591] serial serial0: tty port ttyS0 registered
[ 0.234863] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.234952] printk: legacy console [ttyS2] enabled
[ 0.242719] platform ff650000.video-codec: Adding to iommu group 0
[ 0.244487] platform ff660000.video-codec: Adding to iommu group 1
[ 0.246218] platform ff8f0000.vop: Adding to iommu group 2
[ 0.247820] platform ff900000.vop: Adding to iommu group 3
[ 0.253582] rockchip-dp ff970000.dp: no DP phy configured
[ 0.288848] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.288885] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 0.289039] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000808002000010
[ 0.289103] xhci-hcd xhci-hcd.0.auto: irq 47, io mem 0xfe800000
[ 0.289355] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.289400] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 0.289419] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.289627] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.289645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.289657] usb usb1: Product: xHCI Host Controller
[ 0.289668] usb usb1: Manufacturer: Linux 6.18.0-rc1 xhci-hcd
[ 0.289678] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 0.290410] ehci-platform fe380000.usb: EHCI Host Controller
[ 0.290411] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.290429] hub 1-0:1.0: USB hub found
[ 0.290443] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.290476] hub 1-0:1.0: 1 port detected
[ 0.290544] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.290977] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.291128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.291144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.291155] usb usb2: Product: xHCI Host Controller
[ 0.291166] usb usb2: Manufacturer: Linux 6.18.0-rc1 xhci-hcd
[ 0.291176] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 0.291800] hub 2-0:1.0: USB hub found
[ 0.291852] hub 2-0:1.0: 1 port detected
[ 0.292296] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 3
[ 0.292328] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 4
[ 0.292352] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 5
[ 0.292398] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[ 0.292550] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.292550] ehci-platform fe380000.usb: irq 49, io mem 0xfe380000
[ 0.292577] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 0.292578] ohci-platform fe3e0000.usb: irq 51, io mem 0xfe3e0000
[ 0.292609] ehci-platform fe3c0000.usb: irq 50, io mem 0xfe3c0000
[ 0.292630] ohci-platform fe3a0000.usb: irq 52, io mem 0xfe3a0000
[ 0.292719] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000808002000010
[ 0.292765] xhci-hcd xhci-hcd.1.auto: irq 48, io mem 0xfe900000
[ 0.292995] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.293015] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 0.293034] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 0.293234] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.293250] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.293261] usb usb7: Product: xHCI Host Controller
[ 0.293271] usb usb7: Manufacturer: Linux 6.18.0-rc1 xhci-hcd
[ 0.293282] usb usb7: SerialNumber: xhci-hcd.1.auto
[ 0.293927] hub 7-0:1.0: USB hub found
[ 0.293976] hub 7-0:1.0: 1 port detected
[ 0.294473] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.294624] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.294640] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.294651] usb usb8: Product: xHCI Host Controller
[ 0.294661] usb usb8: Manufacturer: Linux 6.18.0-rc1 xhci-hcd
[ 0.294671] usb usb8: SerialNumber: xhci-hcd.1.auto
[ 0.295269] hub 8-0:1.0: USB hub found
[ 0.295314] hub 8-0:1.0: 1 port detected
[ 0.296085] usbcore: registered new interface driver uas
[ 0.296198] usbcore: registered new interface driver usb-storage
[ 0.298432] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.298874] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.298906] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.298925] usb usb3: Product: EHCI Host Controller
[ 0.298941] usb usb3: Manufacturer: Linux 6.18.0-rc1 ehci_hcd
[ 0.298988] usb usb3: SerialNumber: fe380000.usb
[ 0.300048] hub 3-0:1.0: USB hub found
[ 0.300119] hub 3-0:1.0: 1 port detected
[ 0.305697] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.306402] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.306433] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.306452] usb usb4: Product: EHCI Host Controller
[ 0.306467] usb usb4: Manufacturer: Linux 6.18.0-rc1 ehci_hcd
[ 0.306483] usb usb4: SerialNumber: fe3c0000.usb
[ 0.307409] hub 4-0:1.0: USB hub found
[ 0.307480] hub 4-0:1.0: 1 port detected
[ 0.324205] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 0.324391] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 0.332106] sdhci: Secure Digital Host Controller Interface driver
[ 0.332125] sdhci: Copyright(c) Pierre Ossman
[ 0.332202] Synopsys Designware Multimedia Card Interface Driver
[ 0.337089] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.338190] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 0.338195] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 0.338241] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 0.338249] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 0.338261] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 0.338285] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 0.338318] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 69,32 bit host data width,256 deep fifo
[ 0.338405] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 68,32 bit host data width,256 deep fifo
[ 0.339821] mmc2: CQHCI version 5.10
[ 0.340073] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[ 0.340101] mmc_host mmc0: card is non-removable.
[ 0.340214] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 0.340619] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.341238] hid: raw HID events driver (C) Jiri Kosina
[ 0.341553] usbcore: registered new interface driver usbhid
[ 0.341572] usbhid: USB HID core driver
[ 0.347731] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
[ 0.347769] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.347787] usb usb6: Product: Generic Platform OHCI controller
[ 0.347803] usb usb6: Manufacturer: Linux 6.18.0-rc1 ohci_hcd
[ 0.347819] usb usb6: SerialNumber: fe3a0000.usb
[ 0.348819] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 (0,8000003f) counters available
[ 0.348831] hub 6-0:1.0: USB hub found
[ 0.348899] hub 6-0:1.0: 1 port detected
[ 0.354036] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 (0,8000003f) counters available
[ 0.355250] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
[ 0.355289] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.355308] usb usb5: Product: Generic Platform OHCI controller
[ 0.355324] usb usb5: Manufacturer: Linux 6.18.0-rc1 ohci_hcd
[ 0.355340] usb usb5: SerialNumber: fe3e0000.usb
[ 0.355671] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.356303] hub 5-0:1.0: USB hub found
[ 0.356419] hub 5-0:1.0: 1 port detected
[ 0.356462] GACT probability NOT on
[ 0.356737] NET: Registered PF_INET6 protocol family
[ 0.363049] Segment Routing with IPv6
[ 0.363113] In-situ OAM (IOAM) with IPv6
[ 0.363198] NET: Registered PF_PACKET protocol family
[ 0.382852] registered taskstats version 1
[ 0.383103] Loading compiled-in X.509 certificates
[ 0.395730] Key type .fscrypt registered
[ 0.395750] Key type fscrypt-provisioning registered
[ 0.460467] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.556489] usb 4-1: new high-speed USB device number 2 using ehci-platform
[ 0.579939] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 0.683173] usb 4-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90
[ 0.683196] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 0.683210] usb 4-1: Product: USB2.0 Hub
[ 0.684234] hub 4-1:1.0: USB hub found
[ 0.684673] hub 4-1:1.0: 4 ports detected
[ 0.755420] usb 6-1: new low-speed USB device number 2 using ohci-platform
[ 0.869284] Freeing initrd memory: 11444K
[ 0.903411] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[ 0.945252] Key type encrypted registered
[ 0.955449] usb 4-1.1: new high-speed USB device number 3 using ehci-platform
[ 0.960480] usb 6-1: New USB device found, idVendor=258a, idProduct=001e, bcdDevice= 1.00
[ 0.960520] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.960538] usb 6-1: Product: USB KEYBOARD
[ 0.960553] usb 6-1: Manufacturer: HAILUCK CO.,LTD
[ 0.970082] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.0/0003:258A:001E.0001/input/input0
[ 0.978280] mmc2: Command Queue Engine enabled
[ 0.978313] mmc2: new HS200 MMC card at address 0001
[ 0.979348] mmcblk2: mmc2:0001 DA4064 58.2 GiB
[ 0.981093] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 0.981153] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[ 0.981183] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[ 0.981896] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 0.992572] mmcblk2: p1 p2
[ 0.993484] mmcblk2boot0: mmc2:0001 DA4064 4.00 MiB
[ 0.995801] mmcblk2boot1: mmc2:0001 DA4064 4.00 MiB
[ 0.997907] mmcblk2rpmb: mmc2:0001 DA4064 16.0 MiB, chardev (243:0)
[ 1.020941] hid-generic 0003:258A:001E.0001: input,hidraw0: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0
[ 1.044179] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input1
[ 1.044700] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input2
[ 1.045122] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input3
[ 1.083920] usb 4-1.1: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[ 1.083943] usb 4-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.083957] usb 4-1.1: Product: USB Camera
[ 1.083968] usb 4-1.1: Manufacturer: Sonix Technology Co., Ltd.
[ 1.095907] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input4
[ 1.096335] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input5
[ 1.097175] hid-generic 0003:258A:001E.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
[ 1.229318] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 49
[ 1.236432] mmc0: new UHS-I speed SDR104 SDIO card at address 0001
[ 1.696422] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 1.697085] rockchip-pcie f8000000.pcie: probe with driver rockchip-pcie failed with error -110
[ 1.701856] rockchip-dp ff970000.dp: no DP phy configured
[ 1.704275] rockchip-dp ff970000.dp: no DP phy configured
[ 1.706756] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffff800080edf7e8)
[ 1.708078] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffff800080edf7e8)
[ 1.708524] rockchip-drm display-subsystem: bound ff970000.dp (ops 0xffff800080ee3870)
[ 1.709403] [drm] Initialized rockchip 1.0.0 for display-subsystem on minor 0
[ 1.950261] panel-edp edp-panel: Skipping disable of already disabled panel
[ 2.091502] Console: switching to colour frame buffer device 240x67
[ 2.123145] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[ 2.123670] clk: Disabling unused clocks
[ 2.124179] PM: genpd: Disabling unused power domains
[ 2.124690] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[ 2.129172] Freeing unused kernel memory: 2304K
[ 2.129401] Run /init as init process
[ 2.129412] with arguments:
[ 2.129422] /init
[ 2.129431] PMOS_FORCE_PARTITION_RESIZE
[ 2.129440] with environment:
[ 2.129448] HOME=/
[ 2.129457] TERM=linux
[ 2.129465] pmos_boot_uuid=fa983328-ced5-4544-9852-75ce9dcf7643
[ 2.129473] pmos_root_uuid=7df4fcde-b8b2-4620-a947-df29ee4ffd00
[ 2.129482] pmos_rootfsopts=defaults
[ 2.215141] syslogd started: BusyBox v1.37.0
[ 2.219246] [pmOS-rd]: ❬❬ PMOS STAGE 1 ❭❭
[ 2.219298] [pmOS-rd]: initramfs version: 3.8.3-r1
[ 2.219325] [pmOS-rd]: ❬❬ PMOS STAGE 2 ❭❭
[ 2.254411] [pmOS-rd]: Starting systemd-udevd version 257.6
[ 3.077758] [pmOS-rd]: modprobe: FATAL: Module libcomposite not found in directory /lib/modules/6.18.0-rc1
[ 3.106634] [pmOS-rd]: cat: can't open '/config/usb_gadget/g1/UDC': No such file or directory
[ 3.162077] [pmOS-rd]: Could not find an interface to run a dhcp server on
[ 3.162131] [pmOS-rd]: Interfaces:
[ 3.165493] [pmOS-rd]: 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN qlen 1000
[ 3.165542] [pmOS-rd]: link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
[ 3.177578] [pmOS-rd]: Setting framebuffer mode to: U:1920x1080p-0
[ 4.295885] [pmOS-rd]: Trying to mount subpartitions for 10 seconds...
[ 9.485698] [pmOS-rd]: Not resizing root partition (/dev/mmcblk2p2): no free space left
[ 9.540330] [pmOS-rd]: Auto-repair and check 'ext' filesystem (/dev/mmcblk2p2)
[ 9.553266] [pmOS-rd]: pmOS_root: clean, 391378/3772080 files, 3625040/15205371 blocks
[ 9.729974] [pmOS-rd]: Resize 'ext4' root filesystem (/dev/mmcblk2p2)
[ 9.737348] [pmOS-rd]: modprobe: FATAL: Module ext4 not found in directory /lib/modules/6.18.0-rc1
[ 9.742169] [pmOS-rd]: resize2fs 1.47.2 (1-Jan-2025)
[ 9.745796] [pmOS-rd]: The filesystem is already 15205371 (4k) blocks long. Nothing to do!
[ 9.751943] [pmOS-rd]: Mount root partition (/dev/mmcblk2p2) to /sysroot (read-write) with options defaults
[ 9.787926] [pmOS-rd]: modprobe: FATAL: Module ext4 not found in directory /lib/modules/6.18.0-rc1
[ 9.840074] EXT4-fs (mmcblk2p2): mounted filesystem 7df4fcde-b8b2-4620-a947-df29ee4ffd00 r/w with ordered data mode. Quota mode: disabled.
[ 9.865069] [pmOS-rd]: Switching root
[ 10.012600] syslogd exiting
[ 10.173712] systemd[1]: System time advanced to timestamp on /var/lib/systemd/timesync/clock: Fri 2025-10-17 07:21:05 GMT
[ 10.268445] systemd[1]: Inserted module 'autofs4'
[ 10.333869] systemd[1]: systemd 257.6 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID -CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE -TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -BTF +XKBCOMMON -UTMP -SYSVINIT -LIBARCHIVE)
[ 10.333928] systemd[1]: Detected architecture arm64.
[ 10.384879] systemd[1]: Hostname set to <pine64-pinebookpro>.
[ 11.368116] systemd[1]: Queued start job for default target Graphical Interface.
[ 11.405500] systemd[1]: Created slice Slice /system/getty.
[ 11.419043] systemd[1]: Created slice Slice /system/modprobe.
[ 11.468704] systemd[1]: Created slice Slice /system/serial-getty.
[ 11.501577] systemd[1]: Created slice User and Session Slice.
[ 11.549915] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.583362] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.632963] systemd[1]: Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
[ 11.633112] systemd[1]: Expecting device /dev/disk/by-uuid/fa983328-ced5-4544-9852-75ce9dcf7643...
[ 11.666823] systemd[1]: Expecting device /dev/ttyS2...
[ 11.667038] systemd[1]: Reached target Local Encrypted Volumes.
[ 11.667330] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 11.716353] systemd[1]: Reached target Path Units.
[ 11.749961] systemd[1]: Reached target Remote Encrypted Volumes.
[ 11.799642] systemd[1]: Reached target Remote File Systems.
[ 11.833182] systemd[1]: Reached target Slice Units.
[ 11.833603] systemd[1]: Reached target Local Verity Protected Volumes.
[ 11.895154] systemd[1]: Listening on Process Core Dump Socket.
[ 11.925340] systemd[1]: Listening on Credential Encryption/Decryption.
[ 11.966801] systemd[1]: systemd-journald-dev-log.socket: SO_PASSSEC failed: Not supported
[ 11.966958] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.000940] systemd[1]: systemd-journald.socket: SO_PASSSEC failed: Not supported
[ 12.001094] systemd[1]: systemd-journald.socket: SO_PASSSEC failed: Not supported
[ 12.001176] systemd[1]: Listening on Journal Sockets.
[ 12.051327] systemd[1]: Listening on DDI File System Mounter Socket.
[ 12.100039] systemd[1]: Listening on Namespace Resource Manager Socket.
[ 12.133644] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
[ 12.166763] systemd[1]: Listening on udev Control Socket.
[ 12.216603] systemd[1]: Listening on udev Kernel Socket.
[ 12.250473] systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 12.266656] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.317693] systemd[1]: Mounting Kernel Debug File System...
[ 12.338350] systemd[1]: Mounting Kernel Trace File System...
[ 12.401947] systemd[1]: Starting Create List of Static Device Nodes...
[ 12.428071] systemd[1]: Starting Load Kernel Module configfs...
[ 12.485073] systemd[1]: Starting Load Kernel Module dm_mod...
[ 12.511551] systemd[1]: Starting Load Kernel Module drm...
[ 12.531103] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: [email protected]
[ 12.563616] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 12.604418] systemd[1]: Starting Load Kernel Module fuse...
[ 12.684270] systemd[1]: Starting Load Kernel Module loop...
[ 12.708435] fuse: init (API version 7.45)
[ 12.716852] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 12.733521] systemd[1]: Starting Journal Service...
[ 12.746787] loop: module loaded
[ 12.769988] systemd[1]: Starting Load Kernel Modules...
[ 12.824056] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
[ 12.838828] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.894495] systemd[1]: Starting Load udev Rules from Credentials...
[ 12.928428] systemd[1]: Starting Coldplug All udev Devices...
[ 12.930344] systemd-journald[1622]: Collecting audit messages is disabled.
[ 12.931848] EXT4-fs (mmcblk2p2): re-mounted 7df4fcde-b8b2-4620-a947-df29ee4ffd00.
[ 12.983180] systemd[1]: Starting swap with zram...
[ 13.031300] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.036303] zram: Added device: zram0
[ 13.037686] zram: Added device: zram1
[ 13.038916] zram: Added device: zram2
[ 13.051494] systemd[1]: Mounted Kernel Debug File System.
[ 13.084882] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.
[ 13.153950] systemd[1]: Mounted Kernel Trace File System.
[ 13.169147] systemd[1]: Finished Create List of Static Device Nodes.
[ 13.217438] systemd[1]: Started Journal Service.
[ 13.869893] systemd-journald[1622]: Received client request to flush runtime journal.
[ 14.599430] random: crng init done
[ 15.590586] cpu cpu0: EM: OPP:408000 is inefficient
[ 15.590913] cpu cpu0: EM: created perf domain
[ 15.596417] cpu cpu4: EM: OPP:600000 is inefficient
[ 15.596442] cpu cpu4: EM: OPP:408000 is inefficient
[ 15.596741] cpu cpu4: EM: created perf domain
[ 15.596753] energy_model: updating cpu0 cpu_cap=381 old capacity=485
[ 15.596765] cpu cpu0: EM: OPP:408000 is inefficient
[ 15.653115] mc: Linux media interface: v0.10
[ 15.689863] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input6
[ 15.699946] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input7
[ 15.703553] videodev: Linux video capture interface: v2.00
[ 15.715482] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input8
[ 15.762276] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 15.781708] rk808-rtc rk808-rtc.4.auto: registered as rtc0
[ 15.782571] rk808-rtc rk808-rtc.4.auto: setting system clock to 2025-10-18T23:39:23 UTC (1760830763)
[ 15.783877] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input9
[ 15.783927] Bluetooth: Core ver 2.22
[ 15.783999] NET: Registered PF_BLUETOOTH protocol family
[ 15.784003] Bluetooth: HCI device and connection manager initialized
[ 15.784020] Bluetooth: HCI socket layer initialized
[ 15.784028] Bluetooth: L2CAP socket layer initialized
[ 15.784045] Bluetooth: SCO socket layer initialized
[ 15.788833] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 15.791860] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 15.793105] EXT4-fs (mmcblk2p1): mounting ext2 file system using the ext4 subsystem
[ 15.794547] EXT4-fs (mmcblk2p1): warning: mounting unchecked fs, running e2fsck is recommended
[ 15.799256] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.1/0003:258A:001E.0002/input/input10
[ 15.807979] EXT4-fs (mmcblk2p1): mounted filesystem fa983328-ced5-4544-9852-75ce9dcf7643 r/w without journal. Quota mode: disabled.
[ 15.811711] hid-multitouch 0003:258A:001E.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
[ 15.817128] dw_wdt ff848000.watchdog: No valid TOPs array specified
[ 15.842138] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 15.842999] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.pine64,pinebook-pro.bin failed with error -2
[ 15.850533] Bluetooth: HCI UART driver ver 2.3
[ 15.850557] Bluetooth: HCI UART protocol H4 registered
[ 15.850561] Bluetooth: HCI UART protocol BCSP registered
[ 15.852234] Bluetooth: HCI UART protocol LL registered
[ 15.852245] Bluetooth: HCI UART protocol ATH3K registered
[ 15.853056] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 15.853158] usbcore: registered new interface driver brcmfmac
[ 15.853306] Bluetooth: HCI UART protocol Intel registered
[ 15.853569] Bluetooth: HCI UART protocol Broadcom registered
[ 15.853636] Bluetooth: HCI UART protocol QCA registered
[ 15.853642] Bluetooth: HCI UART protocol AG6XX registered
[ 15.853683] Bluetooth: HCI UART protocol Marvell registered
[ 15.910752] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video1
[ 15.911187] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video2
[ 15.963199] input: gpio-key-lid as /devices/platform/gpio-key-lid/input/input11
[ 16.000646] dw-apb-uart ff180000.serial: failed to request DMA
[ 16.048630] input: gpio-key-power as /devices/platform/gpio-key-power/input/input12
[ 16.101966] input: rockchip,es8316-codec Headphones as /devices/platform/es8316-sound/sound/card0/input13
[ 16.137471] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 16.137950] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[ 16.167184] rk3288-crypto ff8b0000.crypto: will run requests pump with realtime priority
[ 16.167233] rk3288-crypto ff8b0000.crypto: Register ecb(aes) as ecb-aes-rk
[ 16.167254] rk3288-crypto ff8b0000.crypto: Register cbc(aes) as cbc-aes-rk
[ 16.167261] rk3288-crypto ff8b0000.crypto: Register ecb(des) as ecb-des-rk
[ 16.167267] rk3288-crypto ff8b0000.crypto: Register cbc(des) as cbc-des-rk
[ 16.167274] rk3288-crypto ff8b0000.crypto: Register ecb(des3_ede) as ecb-des3-ede-rk
[ 16.167280] rk3288-crypto ff8b0000.crypto: Register cbc(des3_ede) as cbc-des3-ede-rk
[ 16.167287] rk3288-crypto ff8b0000.crypto: Register sha1 as rk-sha1
[ 16.167295] rk3288-crypto ff8b0000.crypto: Register sha256 as rk-sha256
[ 16.167301] rk3288-crypto ff8b0000.crypto: Register md5 as rk-md5
[ 16.177204] uvcvideo 4-1.1:1.0: Found UVC 1.00 device USB Camera (0c45:6321)
[ 16.179779] rk3288-crypto ff8b8000.crypto: will run requests pump with realtime priority
[ 16.237194] Bluetooth: hci0: BCM: chip id 107
[ 16.237547] Bluetooth: hci0: BCM: features 0x2f
[ 16.239804] Bluetooth: hci0: BCM4345C0
[ 16.239837] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 16.241281] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch
[ 16.354939] panfrost ff9a0000.gpu: clock rate = 500000000
[ 16.363808] usbcore: registered new interface driver uvcvideo
[ 16.398867] panfrost ff9a0000.gpu: EM: created perf domain
[ 16.399120] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[ 16.399127] panfrost ff9a0000.gpu: features: 00000000,00000407, issues: 00000000,24040400
[ 16.399132] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[ 16.399138] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[ 16.431018] [drm] Initialized panfrost 1.4.0 for ff9a0000.gpu on minor 1
[ 17.270487] Bluetooth: hci0: BCM: features 0x2f
[ 17.273278] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 17.273314] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 17.287981] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.288011] Bluetooth: BNEP filters: protocol multicast
[ 17.288032] Bluetooth: BNEP socket layer initialized
[ 17.319081] Bluetooth: MGMT ver 1.23
[ 20.068465] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 20.069067] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 22.628436] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 25.188444] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 27.748495] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 27.749146] ieee80211 phy0: brcmf_dongle_scantime: Scan assoc time error (-110)
[ 30.308444] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 30.309084] ieee80211 phy0: brcmf_netdev_open: failed to bring up cfg80211
[ 32.868440] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 32.869089] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 35.428436] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 35.429078] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 37.988447] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 37.989091] ieee80211 phy0: brcmf_c_set_cur_etheraddr: Setting cur_etheraddr failed, -110
[ 40.548436] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 43.108444] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 45.668436] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 45.669086] ieee80211 phy0: brcmf_dongle_scantime: Scan assoc time error (-110)
[ 48.228448] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 48.229094] ieee80211 phy0: brcmf_netdev_open: failed to bring up cfg80211
[ 50.852458] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 50.853027] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 53.412467] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 53.413055] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 55.972732] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 55.973340] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 56.333124] rfkill: input handler disabled
[ 57.222324] Bluetooth: RFCOMM TTY layer initialized
[ 57.222391] Bluetooth: RFCOMM socket layer initialized
[ 57.222448] Bluetooth: RFCOMM ver 1.11
[ 58.532453] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 58.533020] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 61.092472] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 61.093044] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 63.652476] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 63.653056] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 66.212434] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 66.213009] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 68.772442] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 68.773016] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 71.332454] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 71.333290] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 73.892469] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 73.893308] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 76.452476] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 81.573502] ieee80211 phy0: brcmf_dongle_scantime: Scan assoc time error (-110)
[ 84.132475] ieee80211 phy0: brcmf_netdev_open: failed to bring up cfg80211
[ 84.966832] rfkill: input handler enabled
[ 86.692457] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 86.693303] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 89.252488] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 89.253534] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 91.812473] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 96.932464] ieee80211 phy0: brcmf_dongle_scantime: Scan assoc time error (-110)
[ 99.492479] ieee80211 phy0: brcmf_netdev_open: failed to bring up cfg80211
[ 99.686082] rfkill: input handler disabled
[ 102.052466] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 102.053311] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 104.612485] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 104.613334] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 107.172461] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 107.173300] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 109.732472] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 109.733328] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 112.292526] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 112.293457] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 114.852486] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 114.853321] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 117.412482] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 117.413317] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 119.972460] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 119.973300] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 122.532461] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 122.533294] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 125.092453] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 125.093290] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 127.652444] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 132.772486] ieee80211 phy0: brcmf_dongle_scantime: Scan assoc time error (-110)
[ 135.332465] ieee80211 phy0: brcmf_netdev_open: failed to bring up cfg80211
[ 137.892494] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 137.893328] ieee80211 phy0: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 140.452459] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 140.453297] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-110)
[ 143.012468] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 145.572460] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.
[ 145.573180] ieee80211 phy0: brcmf_dongle_scantime: Scan assoc time error (-5)
[ 145.573901] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do.
[ 145.574613] ieee80211 phy0: brcmf_netdev_open: failed to bring up cfg80211
[ 153.678285] usbcore: deregistering interface driver brcmfmac
[ 172.531195] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 172.531596] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.pine64,pinebook-pro.bin failed with error -2
[ 172.534945] usbcore: registered new interface driver brcmfmac
[ 172.642687] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 172.643199] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2