[PATCH 3/8] wifi: brcmfmac: core: populate radiotap header with RSSI

Populates the radiotap header with dbm_antsignal using the rssi
value extracted from the firmware's hardware RX header, fixing
missing signal data in monitor mode captures.

Signed-off-by: Shivesh <[email protected]>
---
 .../broadcom/brcm80211/brcmfmac/core.c        | 34 +++++++++++--------
 1 file changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index ec170647800d..673f0000389c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -431,45 +431,51 @@ void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb)
 	netif_rx(skb);
 }
 
+struct brcmf_radiotap_info {
+	struct ieee80211_radiotap_header hdr;
+	s8 dbm_antsignal;
+} __packed;
+
 void brcmf_netif_mon_rx(struct brcmf_if *ifp, struct sk_buff *skb)
 {
 	if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FMT_RADIOTAP)) {
-		/* Do nothing */
+		/* Firmware already provided a full radiotap header; do nothing */
 	} else if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FMT_HW_RX_HDR)) {
 		struct wlc_d11rxhdr *wlc_rxhdr = (struct wlc_d11rxhdr *)skb->data;
-		struct ieee80211_radiotap_header *radiotap;
+		struct brcmf_radiotap_info *rtap;
 		unsigned int offset;
 		u16 RxStatus1;
+		s8 rssi;
 
 		RxStatus1 = le16_to_cpu(wlc_rxhdr->rxhdr.RxStatus1);
+		rssi = wlc_rxhdr->rssi;
 
 		offset = sizeof(struct wlc_d11rxhdr);
-		/* MAC inserts 2 pad bytes for a4 headers or QoS or A-MSDU
-		 * subframes
-		 */
+		/* MAC inserts 2 pad bytes for a4 headers or QoS or A-MSDU subframes */
 		if (RxStatus1 & RXS_PBPRES)
 			offset += 2;
 		offset += D11_PHY_HDR_LEN;
 
 		skb_pull(skb, offset);
 
-		/* TODO: use RX header to fill some radiotap data */
-		radiotap = skb_push(skb, sizeof(*radiotap));
-		memset(radiotap, 0, sizeof(*radiotap));
-		radiotap->it_len = cpu_to_le16(sizeof(*radiotap));
+		/* Insert our radiotap header with RSSI data */
+		rtap = skb_push(skb, sizeof(*rtap));
+		memset(rtap, 0, sizeof(*rtap));
+		rtap->hdr.it_len = cpu_to_le16(sizeof(*rtap));
+		rtap->hdr.it_present = cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL);
+		rtap->dbm_antsignal = rssi;
 
-		/* TODO: 4 bytes with receive status? */
-		skb->len -= 4;
+		/* Strip the 4-byte receive status / FCS tail */
+		skb_trim(skb, skb->len - 4);
 	} else {
 		struct ieee80211_radiotap_header *radiotap;
 
-		/* TODO: use RX status to fill some radiotap data */
 		radiotap = skb_push(skb, sizeof(*radiotap));
 		memset(radiotap, 0, sizeof(*radiotap));
 		radiotap->it_len = cpu_to_le16(sizeof(*radiotap));
 
-		/* TODO: 4 bytes with receive status? */
-		skb->len -= 4;
+		/* Strip the 4-byte receive status / FCS tail */
+		skb_trim(skb, skb->len - 4);
 	}
 
 	skb->dev = ifp->ndev;
-- 
2.53.0