Re: [PATCH v4 03/10] hwmon: Use non-OF thermal cooling device registration API

On 5/26/26 15:08, Daniel Lezcano wrote:
> Some HWMON drivers register cooling devices using the OF helper
> devm_thermal_of_cooling_device_register() with a NULL device node.
> 
> With the introduction of a dedicated non-OF registration API,
> switch these users to devm_thermal_cooling_device_register()
> to make the intent explicit and avoid relying on OF-specific helpers.
> 
> This is a pure refactoring with no functional change.
> 
> Signed-off-by: Daniel Lezcano <[email protected]>
> Acked-by: Guenter Roeck <[email protected]>
> ---
>   drivers/hwmon/cros_ec_hwmon.c  | 4 ++--
>   drivers/hwmon/dell-smm-hwmon.c | 4 ++--
>   drivers/hwmon/mlxreg-fan.c     | 4 ++--
>   3 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/hwmon/cros_ec_hwmon.c b/drivers/hwmon/cros_ec_hwmon.c
> index 6cf5ab0f4b73..77dd9f28962d 100644
> --- a/drivers/hwmon/cros_ec_hwmon.c
> +++ b/drivers/hwmon/cros_ec_hwmon.c
> @@ -532,8 +532,8 @@ static void cros_ec_hwmon_register_fan_cooling_devices(struct device *dev,
>   
>   		cpriv->hwmon_priv = priv;
>   		cpriv->index = i;
> -		cdev = devm_thermal_of_cooling_device_register(dev, NULL, type, cpriv,
> -							       &cros_ec_thermal_cooling_ops);
> +		cdev = devm_thermal_cooling_device_register(dev, type, cpriv,
> +							    &cros_ec_thermal_cooling_ops);
>   		if (IS_ERR(cdev)) {
>   			dev_warn(dev, "failed to register fan %zu as a cooling device: %pe\n", i,
>   				 cdev);
> diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
> index 038edffc1ac7..47b373ea6db4 100644
> --- a/drivers/hwmon/dell-smm-hwmon.c
> +++ b/drivers/hwmon/dell-smm-hwmon.c
> @@ -1161,8 +1161,8 @@ static int dell_smm_init_cdev(struct device *dev, u8 fan_num)
>   	if (cdata) {
>   		cdata->fan_num = fan_num;
>   		cdata->data = data;
> -		cdev = devm_thermal_of_cooling_device_register(dev, NULL, name, cdata,
> -							       &dell_smm_cooling_ops);
> +		cdev = devm_thermal_cooling_device_register(dev, name, cdata,
> +							    &dell_smm_cooling_ops);
>   		if (IS_ERR(cdev)) {
>   			devm_kfree(dev, cdata);
>   			ret = PTR_ERR(cdev);
> diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c
> index 137a90dd2075..860de6cfd8a4 100644
> --- a/drivers/hwmon/mlxreg-fan.c
> +++ b/drivers/hwmon/mlxreg-fan.c
> @@ -583,8 +583,8 @@ static int mlxreg_fan_cooling_config(struct device *dev, struct mlxreg_fan *fan)
>   		pwm->fan = fan;
>   		/* Set minimal PWM speed. */
>   		pwm->last_hwmon_state = MLXREG_FAN_PWM_DUTY2STATE(MLXREG_FAN_MIN_DUTY);
> -		pwm->cdev = devm_thermal_of_cooling_device_register(dev, NULL, mlxreg_fan_name[i],
> -								    pwm, &mlxreg_fan_cooling_ops);
> +		pwm->cdev = devm_thermal_cooling_device_register(dev, mlxreg_fan_name[i],
> +								 pwm, &mlxreg_fan_cooling_ops);
>   		if (IS_ERR(pwm->cdev)) {
>   			dev_err(dev, "Failed to register cooling device\n");
>   			return PTR_ERR(pwm->cdev);


Reviewed-by: Lukasz Luba <[email protected]>