Re: [Fuego] differences between fuego vs robot framework

++ [email protected]

On Thu, 26 Sep 2019 at 12:32, koti koti <[email protected]> wrote:

> Hi Tim,
>
> Thanks for your time and  quick response.
>
> I am referring to the "https://robotframework.org " .
>
> Basically my requirement is as below.
>
> 1. I want to run/trigger  LTP regression tests (
> https://github.com/linux-test-project/ltp)  on my embedded board. so to
> run this I need some test harness to do below actions
>
>              a). Power On the target
>              b)  Establish the serial connection.
>              b). Load the images
>              c). Check the target is booted or not
>              d) Trigger the test
>              e)  Get the log and LTP results to database.
>
> for this requirement , I am looking for best Test Harness from any
> opensource projects i.e
>
> frameworks Fuego (http://fuegotest.org)
> Lava (https://wiki.linaro.org/LAVA)
> KernelCI(https://kernelci.org)
> Labgrid(https://github.com/labgrid-project)
> Robot (https://robotframework.org)
> etc.....
>
> Regards,
> Koti
>
> On Thu, 26 Sep 2019 at 01:05, <[email protected]> wrote:
>
>>
>>
>> > -----Original Message-----
>> > From: koti koti
>> >
>> > I have plan to understand the main differences between fuego and robot
>> > test frameworks.
>> > Can some one let me know the major differences between fuego and robot
>> > frameworks?
>>
>> I know a lot about Fuego, but may or may not know anything
>> about the other frameworks you are referring to.
>>
>> What "robot frameworks" are you referring to?
>>  -- Tim
>>
>>