Re: [Fuego] yocto-linux is upload to github

Hi Tim,

It's been a while since we made ubinux open source.
If there are any problems in use, please don't worry to ask me.

by
Wangmy

-----Original Message-----
From: Fuego [mailto:[email protected]] On Behalf Of Wang, Mingyu
Sent: Monday, March 23, 2020 10:36 AM
To: [email protected]
Subject: Re: [Fuego] yocto-linux is upload to github

Hi Tim,

x86_64 can be installed and used conveniently. 
It doesn't need a specific board and can be used by PC or virtual machine.

For arm, we're now using lsdk1046.

We do not provide kernel, so you need to compile kernel according to arch.

by
Wangmy

-----Original Message-----
From: Bird, Tim [mailto:[email protected]] 
Sent: Thursday, March 19, 2020 1:25 AM
To: Wang, Mingyu/王 鸣瑜 <[email protected]>; [email protected]
Subject: RE: yocto-linux is upload to github



> -----Original Message-----
> From: Fuego <[email protected]> On Behalf Of 
> Wang, Mingyu
> 
> Hi Tim,
> 
> yocto-linux is upload to github.
> 
> Here is the URL of yocto-linux
> 
> https://github.com/ubinux/yocto-ubinux
> 
> If you have any questions during use, please let us know.

I see the architectures supported are:
armv7, x86_64 and x86.

Do you have a recommended dev board for testing this?
(Maybe a beaglebone or a minnow board?)
Is there a specific reference board you use (that is generally available)?

Thanks,
 -- Tim





_______________________________________________
Fuego mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/fuego