Re: [Fuego] Test not getting updated in pptlab

Hi Tim,

poll_request.sh was running with -u option only.
Few tests that you put executed successfully.
One test failed because of permission.
I have changed the ownership of /fuego-rw/buildzone from
root to jenkins.

We have kept ttc.conf under /fuego-ro/conf/ folder inside old container
just to get Functional.reboot working first then will move the same
 to a more generic folder /usr/test inside the new container(built already
with /usr/test volume mounted, need to configure for jenkins job).
I did a git pull and tried the Functional.reboot test multiple times,
it's working fine.

Logs for the same :

Running as SYSTEM
Building on master in workspace
/var/lib/jenkins/jobs/poll_requests_on_server/workspace
[workspace] $ /bin/sh -xe /tmp/jenkins6221678271780851761.sh
+ /fuego-core/scripts/poll_requests.sh -u -d 12h -w 120
== Polling server "fuegotest.org/cgi-bin" for requests ==
Processing requests for any board
Installing new tests or upgrading tests is allowed.
Waiting 120 seconds between polls of the server.
Running for 12h
Type Ctrl-C to exit
Checking
Running request: request-2021-01-22_06:42:55.57-pptlab:rpi

Trying to get request 'request-2021-01-22_06:42:55.57-pptlab:rpi' from server
Checking for (possibly newer) test Functional.reboot on server.
Executing test Functional.reboot on board rpi (using spec default)
Running test 'Functional.reboot' on board 'rpi' using spec 'default'
===== doing fuego phase: pre_test =====

===== doing fuego phase: build =====
The test is already built
Fuego test_build duration=0 seconds
===== doing fuego phase: deploy =====
===== doing fuego phase: snapshot =====
Firmware revision: 5.4.83-v7-77+

===== doing fuego phase: run =====
-------------------------------------------------
TAP version 13
1..3
Calling target_reboot for board rpi...

Connection to 192.168.3.123 closed by remote host.

# uptime of board=37 (seconds)
# duration of reboot=44 (seconds)
ok 1 - software reboot with target_reboot
# BOARD_CONTROL=ttc
ok 2 - board has BOARD_CONTROL setting
Calling ov_board_control_reboot for board rpi...

comunicating with relay board

Serial<id=0x7f6d516eb210, open=True>(port='/dev/ttyUSB0',
baudrate=9600, bytesize=8, parity='N', stopbits=1, timeout=3.0,
xonxoff=False, rtscts=False, dsrdtr=False)
Checking for ping..

('Data read is :', 'R')


<function ping at 0x7f6d517012a8>
Sleeping for 3 secs
	
Resetting the RPI board

RELAY1_OFF_COMMAND: 0x31

usb device turned OFF successfully

Sleeping for 2 secs

RELAY1_ON_COMMAND: 0x51

usb device turned ON successfully

Closing Serial Port

# uptime of board=56 (seconds)
# duration of reboot=67 (seconds)
ok 3 - hardware reboot with ov_board_control_reboot
-------------------------------------------------
===== doing fuego phase: post_test =====
scp: /home/pi/test/fuego.Functional.reboot/Functional.reboot.log: No
such file or directory
INFO: the test did not produce a test log on the target

run/
run/run.json

scp: /tmp/fuego.Functional.reboot/rpi.10.10.before: No such file or directory
Warning: no matching Jenkins job found. Not populating Jenkins build directory
Packaging run 'Functional.reboot-default-10-rpi'
Run packaged successfully, and is at:
/tmp/run-Functional.reboot-default-10-on-pptlab:rpi.frp
Run package run-Functional.reboot-default-10-on-pptlab:rpi.frp was
accepted by the server.
Run Functional.reboot-default-10-rpi put to server



Please put requests now.


Thanks and regards,

Pooja More




On Fri, Jan 22, 2021 at 6:08 AM <[email protected]> wrote:

> Pooja,
>
> Can you please double-check that the poll_request.sh script is getting run
> with the '-u' option?
> I have tried updating the Functional.fuego_lab_check test (by putting a
> new one on fuegotest.org)
> and running an updated one, and trying to force an upgrade in your lab by
> submitting a request
> with version="latest".  However, the request ends up running an old broken
> version of
> Functional.fuego_lab_check.  So something is going wrong.
>
> Can you also please do a 'git pull' of fuego-core?  That will at least
> upgrade the 'fuego_lab_check'
> test to the current version (which has some important fixes).  Once that
> test can be upgraded
> remotely, it will give me data I can use to diagnose problems in your lab
> remotely (like
> check directory permissions inside the container)
>
> Thanks,
>  -- Tim
>
>

-- 






This
message contains confidential information and is intended only 
for the
individual(s) named. If you are not the intended
recipient, you are 
notified that disclosing, copying, distributing or taking any
action in 
reliance on the contents of this mail and attached file/s is strictly
prohibited. Please notify the
sender immediately and delete this e-mail 
from your system. E-mail transmission
cannot be guaranteed to be secured or 
error-free as information could be
intercepted, corrupted, lost, destroyed, 
arrive late or incomplete, or contain
viruses. The sender therefore does 
not accept liability for any errors or
omissions in the contents of this 
message, which arise as a result of e-mail
transmission.