[PATCH v1 1/1] arm64: dts: imx8qm-ss-dma: add LPUART4
Stefano Radaelli <[email protected]>
| Newsgroups | dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: Stefano Radaelli <[email protected]> Add the missing LPUART4 node to the i.MX8QM DMA subsystem description. The peripheral is present in the SoC and its LPCG clock controller is already described, but the UART device node is currently missing. Describe its registers, interrupt, clocks, power domain and eDMA channels based on the NXP downstream device tree. Signed-off-by: Stefano Radaelli <[email protected]> --- arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index 974e193f8dcb..25c5e4423163 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -8,6 +8,22 @@ /delete-node/ &adma_pwm_lpcg; &dma_subsys { + lpuart4: serial@5a0a0000 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; + reg = <0x5a0a0000 0x1000>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&uart4_lpcg 1>, <&uart4_lpcg 0>; + clock-names = "ipg", "baud"; + assigned-clocks = <&clk IMX_SC_R_UART_4 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <80000000>; + power-domains = <&pd IMX_SC_R_UART_4>; + dma-names = "rx","tx"; + dmas = <&edma2 20 0 1>, + <&edma2 21 0 0>; + status = "disabled"; + }; + uart4_lpcg: clock-controller@5a4a0000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5a4a0000 0x10000>; -- 2.47.3