[PATCH v30 6/7] arm64: dts: imx8ulp: add secure enclave node
| Newsgroups | dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-doc,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: Pankaj Gupta <[email protected]> Add support for NXP secure enclave called EdgeLock Enclave firmware (se-fw) for imx8ulp-evk. Add label sram0 for sram@2201f000 and add secure-enclave node Signed-off-by: Pankaj Gupta <[email protected]> Reviewed-by: Frank Li <[email protected]> --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index c6d1bb9edf38..182f1444b643 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright 2021 NXP + * Copyright 2021, 2025 NXP */ #include <dt-bindings/clock/imx8ulp-clock.h> @@ -153,7 +153,7 @@ sosc: clock-sosc { #clock-cells = <0>; }; - sram@2201f000 { + sram0: sram@2201f000 { compatible = "mmio-sram"; reg = <0x0 0x2201f000 0x0 0x1000>; @@ -185,6 +185,13 @@ scmi_sensor: protocol@15 { #thermal-sensor-cells = <1>; }; }; + + hsm0: secure-enclave { + compatible = "fsl,imx8ulp-se-ele-hsm"; + mbox-names = "tx", "rx"; + mboxes = <&s4muap 0 0>, <&s4muap 1 0>; + sram = <&sram0>; + }; }; cm33: remoteproc-cm33 { -- 2.43.0