Re: (subset) [PATCH v3 0/3] Add DMA support for i.MX94 and improve AHB read performance

[email protected]
Newsgroups dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-spi
Message-ID <178518066116.2648170.15820007549794747555.b4-ty@b4>
From: Frank Li <[email protected]>


On Wed, 22 Jul 2026 17:00:41 -0500, [email protected] wrote:
> This series adds DMA support to the NXP XSPI controller on i.MX94
> and enables the use of DMA for AHB read operations to improve
> performance.
> 
> On i.MX943 EVK, the measured read throughput improves 4x higher, from
> approximately 70 MB/s to 290 MB/s when DMA is used.
> 
> [...]

Applied, thanks!

[3/3] arm64: dts: imx94-xspi: add the DMA channels
      commit: 933bb140ffbd5015e940ea376a8c5c15b0fbf5d6

Best regards,
-- 
Frank Li <[email protected]>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.