[PATCH v2 01/12] arm64: dts: imx8dxl-evk: fix reserved memory node names for remoteproc

From: Peng Fan <[email protected]>

The imx_rproc driver uses node names to identify reserved memory regions.
It checks for "vdev0buffer" to skip mapping, "rsc-table" to locate the
resource table, and "vdev" prefix to filter vdev regions.

Rename the reserved memory nodes to use the expected names so the driver
can correctly identify and handle each region.

Fixes: ee39dbd9a6cb ("arm64: dts: imx8dxl-evk: add imx8dxl_cm4, lsio mu5, related memory region")
Signed-off-by: Peng Fan <[email protected]>
---
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 0ede0c7ed422c..71eff3efa6d32 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -29,7 +29,7 @@ imx8dxl-cm4 {
 		clocks = <&clk_dummy>;
 		mbox-names = "tx", "rx", "rxdb";
 		mboxes = <&lsio_mu5 0 1 &lsio_mu5 1 1 &lsio_mu5 3 1>;
-		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+		memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>,
 				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
 		power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>;
 		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
@@ -65,32 +65,32 @@ linux,cma {
 			linux,cma-default;
 		};
 
-		vdev0vring0: memory0@90000000 {
+		vdev0vring0: vdev0vring0@90000000 {
 			reg = <0 0x90000000 0 0x8000>;
 			no-map;
 		};
 
-		vdev0vring1: memory@90008000 {
+		vdev0vring1: vdev0vring1@90008000 {
 			reg = <0 0x90008000 0 0x8000>;
 			no-map;
 		};
 
-		vdev1vring0: memory@90010000 {
+		vdev1vring0: vdev1vring0@90010000 {
 			reg = <0 0x90010000 0 0x8000>;
 			no-map;
 		};
 
-		vdev1vring1: memory@90018000 {
+		vdev1vring1: vdev1vring1@90018000 {
 			reg = <0 0x90018000 0 0x8000>;
 			no-map;
 		};
 
-		rsc_table: memory-rsc-table@900ff000 {
+		rsc_table: rsc-table@900ff000 {
 			reg = <0 0x900ff000 0 0x1000>;
 			no-map;
 		};
 
-		vdevbuffer: memory-vdevbuffer@90400000 {
+		vdev0buffer: vdev0buffer@90400000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x90400000 0 0x100000>;
 			no-map;

-- 
2.34.1