[RESEND v1] clk: imx95-blk-ctl: Fix REFCLK rise-fall mismatch on i.MX95

From: Richard Zhu <[email protected]>

When the internal PLL is used as the PCIe reference clock source on i.MX95,
a REFCLK rise-fall time mismatch is observed during PCIe Gen1 compliance
testing with the Lfast IO analyzer.

Fix this issue by configuring the IREF_TX field to 0xF (15), which adjusts
the transmitter current reference to meet the PCIe specification timing
requirements.

Signed-off-by: Richard Zhu <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
---
 drivers/clk/imx/clk-imx95-blk-ctl.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/imx/clk-imx95-blk-ctl.c b/drivers/clk/imx/clk-imx95-blk-ctl.c
index 1f9259f456079..bc6957299ceca 100644
--- a/drivers/clk/imx/clk-imx95-blk-ctl.c
+++ b/drivers/clk/imx/clk-imx95-blk-ctl.c
@@ -44,6 +44,8 @@ struct imx95_blk_ctl_clk_dev_data {
 	const char * const *parent_names;
 	u32 num_parents;
 	u32 reg;
+	u32 reg_init_msk;
+	u32 reg_init_val;
 	u32 bit_idx;
 	u32 bit_width;
 	u32 clk_type;
@@ -289,6 +291,8 @@ static const struct imx95_blk_ctl_clk_dev_data hsio_blk_ctl_clk_dev_data[] = {
 		.parent_names = (const char *[]){ "func_out_en", },
 		.num_parents = 1,
 		.reg = 0,
+		.reg_init_msk = GENMASK(10, 7),
+		.reg_init_val = GENMASK(10, 7),
 		.bit_idx = 6,
 		.bit_width = 1,
 		.type = CLK_GATE,
@@ -410,6 +414,9 @@ static int imx95_bc_probe(struct platform_device *pdev)
 		const struct imx95_blk_ctl_clk_dev_data *data = &bc->pdata->clk_dev_data[i];
 		void __iomem *reg = base + data->reg;
 
+		if (data->reg_init_msk)
+			writel((readl(reg) & ~data->reg_init_msk) | data->reg_init_val, reg);
+
 		if (data->type == CLK_MUX) {
 			hws[i] = clk_hw_register_mux(dev, data->name, data->parent_names,
 						     data->num_parents, data->flags, reg,
-- 
2.34.1