[PATCH RESEND v6 3/5] arm64: dts: qcom: shikra: Add pin configuration for mclks
Nihal Kumar Gupta <[email protected]>
| Newsgroups | dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-i2c,org.kernel.vger.linux-kernel,org.kernel.vger.linux-media |
|---|---|
| Message-ID | <[email protected]> |
Add pinctrl configuration for the four available camera master clocks. Reviewed-by: Bryan O'Donoghue <[email protected]> Reviewed-by: Vladimir Zapolskiy <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Nihal Kumar Gupta <[email protected]> --- arch/arm64/boot/dts/qcom/shikra.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi index ddfcfb137bb29439ce20ba6ebf3a76693792b56c..c6839aa2349f397b041f3201b8a33fa90e36c77f 100644 --- a/arch/arm64/boot/dts/qcom/shikra.dtsi +++ b/arch/arm64/boot/dts/qcom/shikra.dtsi @@ -387,6 +387,34 @@ cci_i2c1_sleep: cci-i2c1-sleep-state { bias-pull-down; }; + cam_mclk0_default: cam-mclk0-default-state { + pins = "gpio34"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk1_default: cam-mclk1-default-state { + pins = "gpio35"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk2_default: cam-mclk2-default-state { + pins = "gpio96"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk3_default: cam-mclk3-default-state { + pins = "gpio98"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + sdc1_state_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; -- 2.34.1