RE: [PATCH v1] PCI: imx6: Move clock enable after core reset assertion

"Hongxing Zhu (OSS)" <[email protected]>
Newsgroups dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-kernel,org.kernel.vger.linux-pci,org.kernel.vger.stable
Message-ID <GV2PR04MB12019165BBE41100A6B5E82698CDB2@GV2PR04MB12019.eurprd04.prod.outlook.com>
NXP Confidential
> -----Original Message-----
> From: Francesco Dolcini <[email protected]>
> Sent: Thursday, August 13, 2026 4:39 PM
> To: Hongxing Zhu (OSS) <[email protected]>
> Cc: [email protected]; [email protected]; [email protected];
> Frank Li <[email protected]>; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; linux-arm-
> [email protected]; [email protected]; [email protected];
> Hongxing Zhu <[email protected]>; [email protected]
> Subject: Re: [PATCH v1] PCI: imx6: Move clock enable after core reset assertion
>
> On Thu, Aug 13, 2026 at 04:29:00PM +0800, [email protected] wrote:
> > From: Richard Zhu <[email protected]>
> >
> > Commit 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling
> > regulators") inadvertently moved clock enablement before core reset
> > assertion, breaking PCI device initialization on i.MX6Q Apalis
> > platforms when
> > ASM1061/ASM1062 is connected.
> >
> > Logs:
> > root@apalis-imx6-11486042:~# dmesg | grep pcie imx6q-pcie
> > 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges:
> > imx6q-pcie 1ffc000.pcie:       IO 0x0001f80000..0x0001f8ffff -> 0x0000000000
> > imx6q-pcie 1ffc000.pcie:      MEM 0x0001000000..0x0001efffff ->
> 0x0001000000
> > imx6q-pcie 1ffc000.pcie: config reg[1] 0x01f00000 == cpu 0x01f00000
> > imx6q-pcie 1ffc000.pcie: iATU: unroll F, 4 ob, 4 ib, align 64K, limit
> > 4G imx6q-pcie 1ffc000.pcie: Link: Only Gen1 is enabled imx6q-pcie
> > 1ffc000.pcie: Link failed to come up. LTSSM: POLL_CONFIG imx6q-pcie
> > 1ffc000.pcie: probe with driver imx6q-pcie failed with error -110
> >
> > To fix this regression, restore the original sequence where clocks are
> > enabled after asserting core reset and configuring the controller type.
> >
> > Fixes: 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling
> > regulators")
> > Signed-off-by: Richard Zhu <[email protected]>
> > Reported-by: Leonardo Costa <[email protected]>
> > Closes:
> > https://lore.kernel.org/all/bl7i3obu2clzsgeoct2a4mtfhv6typcjdqmgneropf
> > 3hpgwve6@n2m5uhlduw57/T/#u
> > Reported-by: Franz Schnyder <[email protected]>
> > Closes:
> > https://lore.kernel.org/all/t65y5d54axtksbfs7r4olcefqhwm6m4dz3njgnrnf7
> > fcotj74i@o7avoznlafbj/
> > Cc: [email protected] # 7.1+
>
> 7.2+, 7.1 does not have the broken commit
>
> minor: it is not 100% clear if the issue is specific to the ASM1061/ASM1062
> device or on the specific power-up sequence (reset vs cold-power-on).
Thanks for your review comments.
Okay, I add this "minor" into commit message.

Richard Zhu
>
> Francesco
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.