[PATCH v5 0/4] ARM: dts: vf: Iris carrier board for the Colibri VF50 and VF61
Mehmet Fide <[email protected]>
| Newsgroups | dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: Mehmet Fide <[email protected]> This adds a device tree for the Toradex Iris carrier board carrying the Vybrid Colibri modules, plus two small preparatory patches for the module-level dtsi that the i.MX Colibri variants already had. Tested on a Colibri VF50 on an Iris V1.1, most recently on 7.2-rc7 plus this series. Changes in v5: - drop the kernel version from the test description in patch 4 (Krzysztof) - collect the Reviewed-by tags Changes in v4: - gpio-line-names packed four per line (Frank Li) - keep the EXT_IO pin group applied next to the carrier hog group instead of overwriting pinctrl-0 in the Iris dtsi, verified in pinmux-pins on hardware (Sashiko review) - enable pwm0/pwm1 like the evaluation board does; both chips register on hardware (Sashiko review) - the compatibles keep their hyphens; Krzysztof asked for hyphens in every newly introduced compatible in the v2 review Changes in v3, following Krzysztof's review: - fold the Iris compatibles into the existing -on-eval enum entries - use hyphens in the newly introduced compatibles - drop the fixed 5V regulator that only fed the VBUS regulator - sent as a fresh thread instead of in reply to v2 Changes in v2: - add the dt-bindings patch for the new compatibles - describe the USB host VBUS regulator instead of hogging USBH_PEN Good old times indeed. You did this job before me and pulled me into Linux in the first place, so having these patches reviewed by you closes a nice circle. I seem to be following your path in every detail by now, the hairline included. The tiny board is still out there measuring every day. Thanks for the reviews! Mehmet Fide (4): ARM: dts: vf-colibri: apply the EXT_IO pin group ARM: dts: vf-colibri: name the SODIMM gpio lines dt-bindings: arm: fsl: add the Colibri VF50 and VF61 on Iris ARM: dts: vf: add Iris carrier board support for Colibri VF50 and VF61 .../devicetree/bindings/arm/fsl.yaml | 12 +- arch/arm/boot/dts/nxp/vf/Makefile | 2 + arch/arm/boot/dts/nxp/vf/vf-colibri-iris.dtsi | 126 ++++++++++++++++++ arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi | 56 ++++++++ .../boot/dts/nxp/vf/vf500-colibri-iris.dts | 14 ++ .../boot/dts/nxp/vf/vf610-colibri-iris.dts | 14 ++ 6 files changed, 220 insertions(+), 4 deletions(-) create mode 100644 arch/arm/boot/dts/nxp/vf/vf-colibri-iris.dtsi create mode 100644 arch/arm/boot/dts/nxp/vf/vf500-colibri-iris.dts create mode 100644 arch/arm/boot/dts/nxp/vf/vf610-colibri-iris.dts base-commit: 3d6d817622b0a9721e3cc404df3469171582be13 -- 2.54.0