[PATCH v40 6/7] arm64: dts: imx8ulp: add secure enclave node

From: Pankaj Gupta <[email protected]>

Add the EdgeLock Enclave (ELE) secure-enclave node to the i.MX8ULP SoC
dtsi, together with a label for sram@2201f000 that the node references.

Keep the node disabled in the SoC dtsi so it does not impose a
reserved-memory requirement on every board. Boards enable the enclave and
provide its memory-region by including imx8ulp-firmware.dtsi.

Signed-off-by: Pankaj Gupta <[email protected]>
Reviewed-by: Frank Li <[email protected]>
---
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index c6d1bb9edf38..38233dd74ee3 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2021 NXP
+ * Copyright 2021, 2025 NXP
  */
 
 #include <dt-bindings/clock/imx8ulp-clock.h>
@@ -153,7 +153,7 @@ sosc: clock-sosc {
 		#clock-cells = <0>;
 	};
 
-	sram@2201f000 {
+	sram0: sram@2201f000 {
 		compatible = "mmio-sram";
 		reg = <0x0 0x2201f000 0x0 0x1000>;
 
@@ -185,6 +185,14 @@ scmi_sensor: protocol@15 {
 				#thermal-sensor-cells = <1>;
 			};
 		};
+
+		hsm0: secure-enclave {
+			compatible = "fsl,imx8ulp-se-ele-hsm";
+			mbox-names = "tx", "rx";
+			mboxes = <&s4muap 0 0>, <&s4muap 1 0>;
+			sram = <&sram0>;
+			status = "disabled";
+		};
 	};
 
 	cm33: remoteproc-cm33 {

-- 
2.43.0